螺杆泵matlab,基于Matlab与VC++混合编程的螺杆泵转子型线设计

2011年第 3期 (总 227期 ) · 1 · 收稿日期: 2010 - 12 - 23 基金项目:国家高技术研究发展计划资助项目 (2007AA05Z208) 设计研究 文章编号: 100622971 (2011) 030001205 基于 Matlab与 VC + +混合编程的螺杆泵转子型线设计 卢振飞 ,曹 　锋 ,李祁光 ,邢子文 (西安交通大学能源与动力工程学院 ,陕西 西安 710049) 摘 　要 :通过 Matlab与 VC + +混合编程实现了螺杆泵转子型线设计的软件化、通用化 ,用户只需要选择改变原始型线的类型 ,输入方程 ,参数范围 ,即可得到其共轭曲线段方程、参数范围。然后通过接触线的计算来判定所设计型线的密封性能。本文采用了 Matlab引擎与 VC + +混合编程 ,Matlab引擎作为服务器进行方程求解等复杂数学计算 ,VC + +编制的界面面向客户接收输入信息 ,输出最终结果。关键词 :Matlab引擎 ;VC + +;混合编程 ;螺杆型线中图分类号 : TB652　　文献标志码 :A　 The Profile Design of Screw Pump Rotor Based on M ixed Programm ing ofMatlab and VC + + LU Zhen2fei, CAO Feng,L IQi2guang, XING Zi2wen(College of Power and Energy Engineering, X i’an J iaotong University, X i’an 710049, China)Abstract: In this paper, the mixed programming ofMatlab and VC + + is used to realize the programming and universal designed for screw pump rotor profile. Users only require selecting the type of changing original profile, and then input formula and parameters range, the conjugate equation of curve segment and the parameters range are obtained. Next, the calculation through contact line is used to judge the seal performance of the de2signed profile. This paper has adopted the mixed programming of Matlab engine and VC + +. Matlab engine completes the solving of sophisticated mathematic calculation as a service. VC + + designs a friendly plane, used to receive the client’ s message and display the results. Key words:Matlab engine;Visual C + +;mixed programming; screw profile 　　螺杆泵转子设计中 ,最重要的是型线设计