Linux命令 nslookup,Linux命令之nslookup

http://www.computerhope.com/unix/unslooku.htm

About nslookup

The nslookup command is used to query internet name servers interactively for information.

Overview

nslookup, which stands for "name server lookup", is a useful tool for finding out information about a named domain.

By default, nslookup will translate a domain name to an IP address (or vice versa). For instance, to find out what the IP address of microsoft.com is, you could run the command:

nslookup microsoft.com

...and you would receive a response like this:

Server: 8.8.8.8

Address: 8.8.8.8#53

Non-authoritative answer:

Name: microsoft.com

Address: 134.170.185.46

Name: microsoft.com

Address: 134.170.188.221

Here, 8.8.8.8 is the address of our system‘s Domain Name Server. This is the server our system is configured to use to translate domain names into IP addresses. "#53" indicates that we are communicating with it on port 53, which is the standard port number domain name servers use to accept queries.

Below this, we have our lookup information for microsoft.com. Our name server returned two entries, 134.170.185.46 and 134.170.188.221. This indicates thatmicrosoft.com uses a round robin setup to distribute server load. When you accessmicrsoft.com, you may be directed to either of these servers and your packets will berouted to the correct destination.

You can see that we have received a "Non-authoritative answer" to our query. An answer is "authoritative" only if our DNS has the complete zone file information for the domain in question. More often, our DNS will have a cache of information representing the last authoritative answer it received when it made a similar query; this information is passed on to you, but the server qualifies it as "non-authoritative": the information was recently received from an authoritative source, but the DNS server is not itself that authority.

原文：http://www.cnblogs.com/kex1n/p/5730234.html