(程序1)
题目:有1、2、3、4个数字,能组成多少个互不相同且无重复数字的三位数?都是多少?
1.程序分析:可填在百位、十位、个位的数字都是1、2、3、4。组成所有的排列后再去掉不满足条件的排列。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
int i,j,k;
printf***"\n"***;
for***i=1;i<5;i++*** /*以下为三重循环*/
for***j=1;j<5;j++***
for ***k=1;k<5;k++***
{
if ***i!=k&&i!=j&&j!=k*** /*确保i、j、k三位互不相同*/
printf***"%d,%d,%d\n",i,j,k***;
}
getch******;
}
==============================================================
(程序2)
题目:企业发放的奖金根据利润提成。利润***I***低于或等于10万元时,奖金可提10%;
利润高
于10万元,低于20万元时,低于10万元的部分按10%提成,高于10万元的部分,可可提
成7.5%;
20万到40万之间时,高于20万元的部分,可提成5%;
40万到60万之间时高于
40万元的部分,可提成3%;
60万到100万之间时,高于60万元的部分,可提成1.5%,高于
100万元时,超过100万元的部分按1%提成,从键盘输入当月利润I,求应发放奖金总数?
1.程序分析:请利用数轴来分界,定位。注意定义时需把奖金定义成长整型。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
long int i;
int bonus1,bonus2,bonus4,bonus6,bonus10,bonus;
scanf***"%ld",&i***;
bonus1=100000*0. 1;
bonus2=bonus1+100000*0.75;
bonus4=bonus2+200000*0.5;
bonus6=bonus4+200000*0.3;
bonus10=bonus6+400000*0.15;
if***i<=100000***
bonus=i*0.1;
else if***i<=200000***
bonus=bonus1+***i-100000****0.075;
else if***i<=400000***
bonus=bonus2+***i-200000****0.05;
else if***i<=600000***
bonus=bonus4+***i-400000****0.03;
else if***i<=1000000***
bonus=bonus6+***i-600000****0.015;
else
bonus=bonus10+***i-1000000****0.01;
printf***"bonus=%d",bonus***;
getch******;
}
==============================================================
(程序3)
题目:一个整数,它加上100后是一个完全平方数,再加上168又是一个完全平方数,请问该数是多少?
1.程序分析:在10万以内判断,先将该数加上100后再开方,再将该数加上268后再开方,如果开方后
的结果满足如下条件,即是结果。请看具体分析:
2.程序源代码:
复制代码 代码如下:
#include "math.h"
#include "stdio.h"
#include "conio.h"
main******
{
long int i,x,y,z;
for ***i=1;i<100000;i++***
{
x=sqrt***i+100***; /*x为加上100后开方后的结果*/
y=sqrt***i+268***; /*y为再加上168后开方后的结果*/
if***x*x==i+100&&y*y==i+268*** /*如果一个数的平方根的平方等于该数,这说明此数是完全平方数*/
printf***"\n%ld\n",i***;
}
getch******;
}
==============================================================
(程序4)
题目:输入某年某月某日,判断这一天是这一年的第几天?
1.程序分析:以3月5日为例,应该先把前两个月的加起来,然后再加上5天即本年的第几天,特殊
情况,闰年且输入月份大于3时需考虑多加一天。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
int day,month,year,sum,leap;
printf***"\nplease input year,month,day\n"***;
scanf***"%d,%d,%d",&year,&month,&day***;
switch***month*** /*先计算某月以前月份的总天数*/
{
case 1:sum=0;break;
case 2:sum=31;break;
case 3:sum=59;break;
case 4:sum=90;break;
case 5:sum=120;break;
case 6:sum=151;break;
case 7:sum=181;break;
case 8:sum=212;break;
case 9:sum=243;break;
case 10:sum=273;break;
case 11:sum=304;break;
case 12:sum=334;break;
error"***;break;
}
sum=sum+day; /*再加上某天的天数*/
if***year%400==0||***year%4==0&&year%100!=0****** /*判断是不是闰年*/
leap=1;
else
leap=0;
if***leap==1&&month>2*** /*如果是闰年且月份大于2,总天数应该加一天*/
sum++;
printf***"It is the %dth day.",sum***;
getch******;
}
==============================================================
(程序5)
题目:输入三个整数x,y,z,请把这三个数由小到大输出。
1.程序分析:我们想办法把最小的数放到x上,先将x与y进行比较,如果x>y则将x与y的值进行交换,
然后再用x与z进行比较,如果x>z则将x与z的值进行交换,这样能使x最小。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
int x,y,z,t;
scanf***"%d%d%d",&x,&y,&z***;
if ***x>y***
{t=x;x=y;y=t;} /*交换x,y的值*/
if***x>z***
{t=z;z=x;x=t;} /*交换x,z的值*/
if***y>z***
{t=y;y=z;z=t;} /*交换z,y的值*/
printf***"small to big: %d %d %d\n",x,y,z***;
getch******;
}
==============================================================
(程序6)
题目:用*号输出字母C的图案。
1.程序分析:可先用’*’号在纸上写出字母C,再分行输出。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
printf***"Hello C-world!\n"***;
printf***" ****\n"***;
printf***" *\n"***;
printf***" * \n"***;
printf***" ****\n"***;
getch******;
}
==============================================================
(程序7)
题目:输出特殊图案,请在c环境中运行,看一看,Very Beautiful!
1.程序分析:字符共有256个。不同字符,图形不一样。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
char a=176,b=219;
printf***"%c%c%c%c%c\n",b,a,a,a,b***;
printf***"%c%c%c%c%c\n",a,b,a,b,a***;
printf***"%c%c%c%c%c\n",a,a,b,a,a***;
printf***"%c%c%c%c%c\n",a,b,a,b,a***;
printf***"%c%c%c%c%c\n",b,a,a,a,b***;
getch******;
}
==============================================================
(程序8)
题目:输出9*9口诀。
1.程序分析:分行与列考虑,共9行9列,i控制行,j控制列。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
int i,j,result;
printf***"\n"***;
for ***i=1;i<10;i++***
{
for***j=1;j<10;j++***
{
result=i*j;
printf***"%d*%d=%-3d",i,j,result***; /*-3d表示左对齐,占3位*/
}
printf***"\n"***; /*每一行后换行*/
}
getch******;
}
==============================================================
(程序9)
题目:要求输出国际象棋棋盘。
1.程序分析:用i控制行,j来控制列,根据i+j的和的变化来控制输出黑方格,还是白方格。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
int i,j;
for***i=0;i<8;i++***
{
for***j=0;j<8;j++***
if******i+j***%2==0***
printf***"%c%c",219,219***;
else
printf***" "***;
printf***"\n"***;
}
getch******;
}
==============================================================
(程序10)
题目:打印楼梯,同时在楼梯上方打印两个笑脸。
1.程序分析:用i控制行,j来控制列,j根据i的变化来控制输出黑方格的个数。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
int i,j;
printf***"\1\1\n"***; /*输出两个笑脸*/
for***i=1;i<11;i++***
{
for***j=1;j<=i;j++***
printf***"%c%c",219,219***;
printf***"\n"***;
}
getch******;
}
(程序11)
题目:古典问题:有一对兔子,从出生后第3个月起每个月都生一对兔子,小兔子长到第三个月
后每个月又生一对兔子,假如兔子都不死,问每个月的兔子总数为多少?
1.程序分析: 兔子的规律为数列1,1,2,3,5,8,13,21....
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
long f1,f2;
int i;
f1=f2=1;
for***i=1;i<=20;i++***
{
printf***"%12ld %12ld",f1,f2***;
if***i%2==0*** printf***"\n"***; /*控制输出,每行四个*/
f1=f1+f2; /*前两个月加起来赋值给第三个月*/
f2=f1+f2; /*前两个月加起来赋值给第三个月*/
}
getch******;
}
==============================================================
(程序12)
题目:判断101-200之间有多少个素数,并输出所有素数。
1.程序分析:判断素数的方法:用一个数分别去除2到sqrt***这个数***,如果能被整除,
则表明此数不是素数,反之是素数。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
#include "math.h"
main******
{
int m,i,k,h=0,leap=1;
printf***"\n"***;
for***m=101;m<=200;m++***
{
k=sqrt***m+1***;
for***i=2;i<=k;i++***
if***m%i==0***
{
leap=0;
break;
}
if***leap***
{
printf***"%-4d",m***;
h++;
if***h%10==0***
printf***"\n"***;
}
leap=1;
}
printf***"\nThe total is %d",h***;
getch******;
}
==============================================================
(程序13)
题目:打印出所有的“水仙花数”,所谓“水仙花数”是指一个三位数,其各位数字立方和等于该数
本身。例如:153是一个“水仙花数”,因为153=1的三次方+5的三次方+3的三次方。
1.程序分析:利用for循环控制100-999个数,每个数分解出个位,十位,百位。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
int i,j,k,n;
printf***"’water flower’number is:"***;
for***n=100;n<1000;n++***
{
i=n/100;/*分解出百位*/
j=n/10%10;/*分解出十位*/
k=n%10;/*分解出个位*/
if***i*100+j*10+k==i*i*i+j*j*j+k*k*k***
printf***"%-5d",n***;
}
getch******;
}
==============================================================
(程序14)
题目:将一个正整数分解质因数。例如:输入90,打印出90=2*3*3*5。
程序分析:对n进行分解质因数,应先找到一个最小的质数k,然后按下述步骤完成:
***1***如果这个质数恰等于n,则说明分解质因数的过程已经结束,打印出即可。
***2***如果n<>k,但n能被k整除,则应打印出k的值,并用n除以k的商,作为新的正整数你n,
重复执行第一步。
***3***如果n不能被k整除,则用k+1作为k的值,重复执行第一步。
2.程序源代码:
复制代码 代码如下:
/* zheng int is divided yinshu*/
#include "stdio.h"
#include "conio.h"
main******
{
int n,i;
printf***"\nplease input a number:\n"***;
scanf***"%d",&n***;
printf***"%d=",n***;
for***i=2;i<=n;i++***
while***n!=i***
{
if***n%i==0***
{
printf***"%d*",i***;
n=n/i;
}
else
break;
}
printf***"%d",n***;
getch******;
}
==============================================================
(程序15)
题目:利用条件运算符的嵌套来完成此题:学习成绩>=90分的同学用A表示,60-89分之间的用B表示,
60分以下的用C表示。
1.程序分析:***a>b***?a:b这是条件运算符的基本例子。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
int score;
char grade;
printf***"please input a score\n"***;
scanf***"%d",&score***;
grade=score>=90?’A’:***score>=60?’B’:’C’***;
printf***"%d belongs to %c",score,grade***;
getch******;
}
==============================================================
(程序16)
题目:输入两个正整数m和n,求其最大公约数和最小公倍数。
1.程序分析:利用辗除法。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
int a,b,num1,num2,temp;
printf***"please input two numbers:\n"***;
scanf***"%d,%d",&num1,&num2***;
if***num1<="" p="">
{
temp=num1;
num1=num2;
num2=temp;
}
a=num1;b=num2;
while***b!=0***/*利用辗除法,直到b为0为止*/
{
temp=a%b;
a=b;
b=temp;
}
printf***";
printf***";
getch******;
}
==============================================================
(程序17)
题目:输入一行字符,分别统计出其中英文字母、空格、数字和其它字符的个数。
1.程序分析:利用while语句,条件为输入的字符不为’\n’.
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
char c;
int letters=0,space=0,digit=0,others=0;
printf***"please input some characters\n"***;
while******c=getchar*********!=’\n’***
{
if***c>=’a’&&c<=’z’||c>=’A’&&c<=’Z’***
letters++;
else if***c==’ ’***
space++;
else if***c>=’0’&&c<=’9’***
digit++;
else
others++;
}
printf***"all in space=%d digit=%d others=%d\n",letters,
space,digit,others***;
getch******;
}
==============================================================
(程序18)
题目:求s=a+aa+aaa+aaaa+aa...a的值,其中a是一个数字。例如2+22+222+2222+22222***此时
共有5个数相加***,几个数相加有键盘控制。
1.程序分析:关键是计算出每一项的值。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
int a,n,count=1;
long int sn=0,tn=0;
printf***"please input a and n\n"***;
scanf***"%d,%d",&a,&n***;
printf***"a=%d,n=%d\n",a,n***;
while***count<=n***
{
tn=tn+a;
sn=sn+tn;
a=a*10;
++count;
}
printf***"a+aa+...=%ld\n",sn***;
getch******;
}
==============================================================
(程序19)
题目:一个数如果恰好等于它的因子之和,这个数就称为“完数”。例如6=1+2+3.编程
找出1000以内的所有完数。
1. 程序分析:请参照程序
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
static int k[10];
int i,j,n,s;
for***j=2;j<1000;j++***
{
n=-1;
s=j;
for***i=1;i<>< p=""><>
{
if******j%i***==0***
{
n++;
s=s-i;
k[n]=i;
}
}
if***s==0***
{
printf***"%d is a wanshu",j***;
for***i=0;i<>< p=""><>
printf***"%d,",k***;
printf***"%d\n",k[n]***;
}
}
getch******;
}
==============================================================
(程序20)
题目:一球从100米高度自由落下,每次落地后反跳回原高度的一半;
再落下,求它在
第10次落地时,共经过多少米?第10次反弹多高?
1.程序分析:见下面注释
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "stdio.h"
main******
{
float sn=100.0,hn=sn/2;
int n;
for***n=2;n<=10;n++***
{
sn=sn+2*hn;/*第n次落地时共经过的米数*/
hn=hn/2; /*第n次反跳高度*/
}
printf***"the total of road is %f\n",sn***;
printf***"the tenth is %f meter\n",hn***;
getch******;
}
(程序21)
题目:猴子吃桃问题:猴子第一天摘下若干个桃子,当即吃了一半,还不瘾,又多吃了一个
第二天早上又将剩下的桃子吃掉一半,又多吃了一个。以后每天早上都吃了前一天剩下
的一半零一个。到第10天早上想再吃时,见只剩下一个桃子了。求第一天共摘了多少。
1.程序分析:采取逆向思维的方法,从后往前推断。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
int day,x1,x2;
day=9;
x2=1;
while***day>0***
{
x1=***x2+1****2;/*第一天的桃子数是第2天桃子数加1后的2倍*/
x2=x1;
day--;
}
printf***"the total is %d\n",x1***;
getch******;
}
==============================================================
(程序22)
题目:两个乒乓球队进行比赛,各出三人。甲队为a,b,c三人,乙队为x,y,z三人。已抽签决定
比赛名单。有人向队员打听比赛的名单。a说他不和x比,c说他不和x,z比,请编程序找出
三队赛手的名单。
1.程序分析:判断素数的方法:用一个数分别去除2到sqrt***这个数***,如果能被整除,
则表明此数不是素数,反之是素数。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
char i,j,k;/*i是a的对手,j是b的对手,k是c的对手*/
for***i=’x’;i<=’z’;i++***
for***j=’x’;j<=’z’;j++***
{
if***i!=j***
for***k=’x’;k<=’z’;k++***
{
if***i!=k&&j!=k***
{
if***i!=’x’&&k!=’x’&&k!=’z’***
printf***"order is a--%c\tb--%c\tc--%c\n",i,j,k***;
}
}
}
getch******;
}
==============================================================
(程序23)
题目:打印出如下图案(菱形)
*
***
*****
*******
*****
***
*
1.程序分析:先把图形分成两部分来看待,前四行一个规律,后三行一个规律,利用双重
for循环,第一层控制行,第二层控制列。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
int i,j,k;
for***i=0;i<=3;i++***
{
for***j=0;j<=2-i;j++***
printf***" "***;
for***k=0;k<=2*i;k++***
printf***"*"***;
printf***"\n"***;
}
for***i=0;i<=2;i++***
{
for***j=0;j<=i;j++***
printf***" "***;
for***k=0;k<=4-2*i;k++***
printf***"*"***;
printf***"\n"***;
}
getch******;
}
==============================================================
(程序24)
题目:有一分数序列:2/1,3/2,5/3,8/5,13/8,21/13...求出这个数列的前20项之和。
1.程序分析:请抓住分子与分母的变化规律。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
int n,t,number=20;
float a=2,b=1,s=0;
for***n=1;n<=number;n++***
{
s=s+a/b;
t=a;a=a+b;b=t;/*这部分是程序的关键,请读者猜猜t的作用*/
}
printf***"sum is %9.6f\n",s***;
getch******;
}
==============================================================
(程序25)
题目:求1+2!+3!+...+20!的和
1.程序分析:此程序只是把累加变成了累乘。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
float n,s=0,t=1;
for***n=1;n<=20;n++***
{
t*=n;
s+=t;
}
printf***"1+2!+3!...+20!=%e\n",s***;
getch******;
}
==============================================================
(程序26)
题目:利用递归方法求5!。
1.程序分析:递归公式:fn=fn_1*4!
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
int i;
int fact******;
for***i=0;i<5;i++***
printf***"\40:%d!=%d\n",i,fact***i******;
getch******;
}
int fact***j***
int j;
{
int sum;
if***j==0***
sum=1;
else
sum=j*fact***j-1***;
return sum;
}
==============================================================
(程序27)
题目:利用递归函数调用方式,将所输入的5个字符,以相反顺序打印出来。
1.程序分析:
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
int i=5;
void palin***int n***;
printf***"\40:"***;
palin***i***;
printf***"\n"***;
getch******;
}
void palin***n***
int n;
{
char next;
if***n<=1***
{
next=getchar******;
printf***"\n\0:"***;
putchar***next***;
}
else
{
next=getchar******;
palin***n-1***;
putchar***next***;
}
}
==============================================================
(程序28)
题目:有5个人坐在一起,问第五个人多少岁?他说比第4个人大2岁。问第4个人岁数,他说比第
3个人大2岁。问第三个人,又说比第2人大两岁。问第2个人,说比第一个人大两岁。最后
问第一个人,他说是10岁。请问第五个人多大?
1.程序分析:利用递归的方法,递归分为回推和递推两个阶段。要想知道第五个人岁数,需知道
第四人的岁数,依次类推,推到第一人(10岁),再往回推。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
age***n***
int n;
{
int c;
if***n==1*** c=10;
else c=age***n-1***+2;
return***c***;
}
main******
{
printf***"%d",age***5******;
getch******;
}
==============================================================
(程序29)
题目:给一个不多于5位的正整数,要求:一、求它是几位数,二、逆序打印出各位数字。
1. 程序分析:学会分解出每一位数,如下解释:***这里是一种简单的算法,师专数002班赵鑫提供***
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main*** ***
{
long a,b,c,d,e,x;
scanf***"%ld",&x***;
a=x/10000;/*分解出万位*/
b=x%10000/1000;/*分解出千位*/
c=x%1000/100;/*分解出百位*/
d=x%100/10;/*分解出十位*/
e=x%10;/*分解出个位*/
if ***a!=0*** printf***"there are 5, %ld %ld %ld %ld %ld\n",e,d,c,b,a***;
else if ***b!=0*** printf***"there are 4, %ld %ld %ld %ld\n",e,d,c,b***;
else if ***c!=0*** printf***" there are 3,%ld %ld %ld\n",e,d,c***;
else if ***d!=0*** printf***"there are 2, %ld %ld\n",e,d***;
else if ***e!=0*** printf***" there are 1,%ld\n",e***;
getch******;
}
==============================================================
(程序30)
题目:一个5位数,判断它是不是回文数。即12321是回文数,个位与万位相同,十位与千位相同。
1.程序分析:同29例
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main*** ***
{
long ge,shi,qian,wan,x;
scanf***"%ld",&x***;
wan=x/10000;
qian=x%10000/1000;
shi=x%100/10;
ge=x%10;
if***ge==wan&&shi==qian***/*个位等于万位并且十位等于千位*/
printf***"this number is a huiwen\n"***;
else
printf***"this number is not a huiwen\n"***;
getch******;
}
(程序31)
题目:请输入星期几的第一个字母来判断一下是星期几,如果第一个字母一样,则继续
判断第二个字母。
1.程序分析:用情况语句比较好,如果第一个字母一样,则判断用情况语句或if语句判断第二个字母。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
void main******
{
char letter;
printf***"please input the first letter of someday\n"***;
while******letter=getch*********!=’Y’***/*当所按字母为Y时才结束*/
{
switch ***letter***
{
case ’S’:printf***"please input second letter\n"***;
if******letter=getch*********==’a’***
printf***"saturday\n"***;
else if ******letter=getch*********==’u’***
printf***"sunday\n"***;
else printf***"data error\n"***;
break;
case ’F’:printf***"friday\n"***;break;
case ’M’:printf***"monday\n"***;break;
case ’T’:printf***"please input second letter\n"***;
if******letter=getch*********==’u’***
printf***"tuesday\n"***;
else if ******letter=getch*********==’h’***
printf***"thursday\n"***;
else printf***"data error\n"***;
break;
case ’W’:printf***"wednesday\n"***;break;
default: printf***"data error\n"***;
}
}
getch******;
}
==============================================================
(程序32)
题目:Press any key to change color, do you want to try it. Please hurry up!
1.程序分析:
2.程序源代码:
复制代码 代码如下:
#include "conio.h"
#include "stdio.h"
void main***void***
{
int color;
for ***color = 0; color < 8; color++***
{
textbackground***color***;/*设置文本的背景颜色*/
cprintf***"This is color %d\r\n", color***;
cprintf***"Press any key to continue\r\n"***;
getch******;/*输入字符看不见*/
}
}
==============================================================
(程序33)
题目:学习gotoxy******与clrscr******函数
1.程序分析:
2.程序源代码:
复制代码 代码如下:
#include "conio.h"
#include "stdio.h"
void main***void***
{
clrscr******;/*清屏函数*/
textbackground***2***;
gotoxy***1, 5***;/*定位函数*/
cprintf***"Output at row 5 column 1\n"***;
textbackground***3***;
gotoxy***20, 10***;
cprintf***"Output at row 10 column 20\n"***;
getch******;
}
==============================================================
(程序34)
题目:练习函数调用
1. 程序分析:
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
void hello_world***void***
{
printf***"Hello, world!\n"***;
}
void three_hellos***void***
{
int counter;
for ***counter = 1; counter <= 3; counter++***
hello_world******;/*调用此函数*/
}
void main***void***
{
three_hellos******;/*调用此函数*/
getch******;
}
==============================================================
(程序35)
题目:文本颜色设置
1.程序分析:
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
void main***void***
{
int color;
for ***color = 1; color < 16; color++***
{
textcolor***color***;/*设置文本颜色*/
cprintf***"This is color %d\r\n", color***;
}
textcolor***128 + 15***;
cprintf***"This is blinking\r\n"***;
getch******;
}
==============================================================
(程序36)
题目:求100之内的素数
1.程序分析:
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "math.h"
#define N 101
main******
{
int i,j,line,a[N];
for***i=2;i
for***i=2;i<>< p=""><>
for***j=i+1;j<>< p=""><>
{
if***a!=0&&a[j]!=0***
if***a[j]%a==0***
a[j]=0;
}
printf***"\n"***;
for***i=2,line=0;i<>< p=""><>
{
if***a!=0***
{
printf***"%5d",a***;
line++;
}
if***line==10***
{
printf***"\n"***;
line=0;
}
}
getch******;
}
==============================================================
(程序37)
题目:对10个数进行排序
1.程序分析:可以利用选择法,即从后9个比较过程中,选择一个最小的与第一个元素交换,
下次类推,即用第二个元素与后8个进行比较,并进行交换。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
#define N 10
main******
{
int i,j,min,tem,a[N];
/*input data*/
printf***"please input ten num:\n"***;
for***i=0;i<>< p=""><>
{
printf***"a[%d]=",i***;
scanf***"%d",&a***;
}
printf***"\n"***;
for***i=0;i<>< p=""><>
printf***"%5d",a***;
printf***"\n"***;
/*sort ten num*/
for***i=0;i<>< p=""><>
{
min=i;
for***j=i+1;j<>< p=""><>
if***a[min]>a[j]***
min=j;
tem=a;
a=a[min];
a[min]=tem;
}
/*output data*/
printf***"After sorted \n"***;
for***i=0;i<>< p=""><>
printf***"%5d",a***;
getch******;
}
==============================================================
(程序38)
题目:求一个3*3矩阵对角线元素之和
1.程序分析:利用双重for循环控制输入二维数组,再将a累加后输出。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
/* 如果使用的是TC系列编译器则可能需要添加下句 */
static void dummyfloat***float *x***{ float y; dummyfloat***&y***;}
main******
{
float a[3][3],sum=0;
int i,j;
printf***"please input rectangle element:\n"***;
for***i=0;i<3;i++***
for***j=0;j<3;j++***
scanf***"%f",&a[j]***;
for***i=0;i<3;i++***
sum=sum+a;
printf***"duijiaoxian he is %6.2f",sum***;
getch******;
}
==============================================================
(程序39)
题目:有一个已经排好序的数组。现输入一个数,要求按原来的规律将它插入数组中。
1. 程序分析:首先判断此数是否大于最后一个数,然后再考虑插入中间的数的情况,插入后
此元素之后的数,依次后移一个位置。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
int a[11]={1,4,6,9,13,16,19,28,40,100};
int temp1,temp2,number,end,i,j;
printf***"original array is:\n"***;
for***i=0;i<10;i++***
printf***"%5d",a***;
printf***"\n"***;
printf***"insert a new number:"***;
scanf***"%d",&number***;
end=a[9];
if***number>end***
a[10]=number;
else
{
for***i=0;i<10;i++***
{
if***a>number***
{
temp1=a;
a=number;
for***j=i+1;j<11;j++***
{
temp2=a[j];
a[j]=temp1;
temp1=temp2;
}
break;
}
}
}
for***i=0;i<11;i++***
printf***"%6d",a***;
getch******;
}
==============================================================
(程序40)
题目:将一个数组逆序输出。
1.程序分析:用第一个与最后一个交换。
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
#define N 5
main******
{
int a[N]={9,6,5,4,1},i,temp;
printf***"\n original array:\n"***;
for***i=0;i<>< p=""><>
printf***"%4d",a***;
for***i=0;i<="" p="">
{
temp=a;
a=a[N-i-1];
a[N-i-1]=temp;
}
printf***"\n sorted array:\n"***;
for***i=0;i<>< p=""><>
printf***"%4d",a***;
getch******;
}
==============================================================
(程序41)
题目:学习static定义静态变量的用法
1.程序分析:
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
varfunc******
{
int var=0;
static int static_var=0;
printf***"\40:var equal %d \n",var***;
printf***"\40:static var equal %d \n",static_var***;
printf***"\n"***;
var++;
static_var++;
}
void main******
{
int i;
for***i=0;i<3;i++***
varfunc******;
getch******;
}
==============================================================
(程序42)
题目:学习使用auto定义变量的用法
1.程序分析:
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
int i,num;
num=2;
for***i=0;i<3;i++***
{
printf***"\40: The num equal %d \n",num***;
num++;
{
auto int num=1;
printf***"\40: The internal block num equal %d \n",num***;
num++;
}
}
getch******;
}
==============================================================
(程序43)
题目:学习使用static的另一用法。
1.程序分析:
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
main******
{
int i,num;
num=2;
for***i=0;i<3;i++***
{
printf***"\40: The num equal %d \n",num***;
num++;
{
static int num=1;
printf***"\40:The internal block num equal %d\n",num***;
num++;
}
}
getch******;
}
==============================================================
(程序44)
题目:学习使用external的用法。
1.程序分析:
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
int a,b,c;
void add******
{
int a;
a=3;
c=a+b;
}
void main******
{
a=b=4;
add******;
printf***"The value of c is equal to %d\n",c***;
getch******;
}
==============================================================
(程序45)
题目:学习使用register定义变量的方法。
1.程序分析:
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
void main******
{
register int i;
int tmp=0;
for***i=1;i<=100;i++***
tmp+=i;
printf***"The sum is %d\n",tmp***;
getch******;
}
==============================================================
(程序46)
题目:宏#define命令练习***1***
1.程序分析:
2.程序源代码:
复制代码 代码如下:
#include "stdio.h"
#include "conio.h"
#define TRUE 1
#define FALSE 0
#define SQ***x*** ***x*******x***
void main******
{
int num;
int again=1;
printf***"\40: Program will stop if input value less than 50.\n"***;
while***again***
{
printf***"\40:Please input number==>"***;
scanf***"%d",&num***;
printf***"\40:The square for this number is %d \n",SQ***num******;
if***num>=50***
again=TRUE;
else
again=FALSE;
}
getch******;
}
==============================================================
(程序47)
题="">="">