oracle安装蓝屏_oracle 11.2g win2008 蓝屏问题

最新推荐文章于 2021-04-14 16:20:51 发布

weixin_39914863

最新推荐文章于 2021-04-14 16:20:51 发布

阅读量199

点赞数

文章标签： oracle安装蓝屏

本文链接：https://blog.csdn.net/weixin_39914863/article/details/111748374

版权

Oracle 11.2.0.2 在Windows 2008上安装或运行时出现蓝屏，错误为DRIVER_IRQL_NOT_LESS_OR_EQUAL，涉及orafencedrv.sys或orafenceservice.sys。问题由bug 10637621引起，当系统超过32个逻辑处理器时发生。解决方案包括应用特定补丁或采用工作roundabout，如减少CPU数量或使用软件更新选项。

摘要由CSDN通过智能技术生成

Applies to:

Oracle Server - Enterprise Edition - Version: 10.2.0.1 to 11.2.0.2 - Release: 10.2 to 11.2

Microsoft Windows x64 (64-bit)

Symptoms

Oracle Clusterware installation(10.2 - 11.1 CRS or 11.2 Grid Infrastructure) fails with a blue screen, WinDbg shows BugCheck D1 (DRIVER_IRQL_NOT_LESS_OR_EQUAL) against orafencedrv.sys or orafenceservice.sys or ntkrnlmp.exe on x64 Windows cluster with more than 32 Logical Processor(s).

Oracle Clusterware fails to start with same symptoms after Logical Processor(s) are increased to above 32

To find out the number of Logical Processor(s):

~~~~

Run "msinfo32" from the command line or via the "Run" option.

There will be a section like this.

~~~~~

...

System Type x64-based PC

Processor Intel(R) Xeon(R) CPU E7540 @ 2.00GHz, 2000 Mhz, 6 Core(s), 12 Logical Processor(s)

....

This shows 4 physical CPUs each of which has 12 Logical Processors. This equals 48 ( 4 x 12 ) processors as far as the orafenceservice.sys is concerned and will cause the problem mentioned in this note.

Cause

The issue is caused by bug 10637621, relevant information can be seen in the following bugs:

Bug:9901433 BLUE SCREEN OCCURED DURING INSTALLING CLUSTERWARE for 11.1.0.7.

Bug:10027132 DURING INSTALLATION GI WIN X64 11.2 SERVER BUGCHECKS 0XD1 IN ORAFENCESERVIC.SYS and was determined to be a duplicate of Bug:9901433.

Bug:10637621 11.2.0.2 WIN GI INSTALL @ BUGCHECKS WITH 0XD1 IN ORAFENCESERVICE.SYS

The x64 fencing code currently has a limit of 32 processors.

Solution

bug 10637621 is fixed in :

10.2.0.4 Patch 43 patch 11731126

10.2.0.5 Patch 9 patch 12332704

11.2.0.2 Patch 3 patch 11731184

It's recommended to apply latest patches to fix the issue; if patch is unavailable, please engage Oracle Support to request.

As the issue affects initial clusterware configuration, here's a few workarounds:

1. Reduce number of CPUs to below 32, install clusterware, apply necessary patches and restore original number of CPUs.

2. OR install on node with less than 32 CPU, apply necessary patches and clone it to target cluster.

3. Or for 11.2.0.2 and above, utilize new feature Software Update Option to apply the patch before clusterware is configured. Refer to screenshots for details.

References

BUG:10027132 - DURING INSTALLATION GI WIN X64 11.2 SERVER BUGCHECKS 0XD1 IN ORAFENCESERVIC.SYS

BUG:10637621 - 11.2.0.2 WIN GI INSTALL BUGCHECKS WITH 0XD1 IN ORAFENCESERVICE.SYS

BUG:9901433 - BLUE SCREEN OCCURED DURING INSTALLING CLUSTERWARE.