shutdown以一种安全的方式关闭系统。
(1)用法:
用法: shutdown [参数] [时间]
(2)功能:
功能: 系统关机命令,shutdown指令可以关闭所有程序,并依用户的需要,进行重新开机或关机的动作,所有登陆用户都可以看到关机信息提示。
原理: shutdown通过通知init进程,要求它改换运行级别来实现。运行级别0用来关闭系统,运行级别6用来重启系统,运行级别1用来使系统进入执行系统管理任务状态,如果没有给出 -h 或 -r 标志时,这是 shutdown 命令的默认工作状态。
(3)选项参数:
1) -h 将系统关机
2) -r shutdown之后重新启动
3) -k 只是送出信息给所有用户,但不会实际关机
4) -f 重启时跳过磁盘检测
5) -F 重启时强制磁盘检测。
6) -c 取消运行中的 shutdown 进程。不可能为此选项指定 time 参数,但你可以在命令行输入一条解释消息来向所有用户说明。
(一般的shutdown指令可以用按“+”号来进行中断)
(4)实例:
1)在特定的时间执行关机命令:
shutdown -h now //立即关机
shutdown -h 12:00 //在12:00关机
2)指定5分钟后关机,同时送出警告信息给登入用户
[email protected]:/home/sunjimeng# shutdown +5 "This System will be shutdown in 5 minute!"
来自[email protected]的广播信息
(/dev/pts/6) 于 10:38 ...
The system is going down for maintenance in 5 minutes! //系统提醒
This System will be shutdown in 5 minute! //用户自定义提醒
3)取消关机命令
shutdown -c
4)在特定时间执行关机重启命令,并取消
[[email protected] ~]$ su root //必须是root用户
密码:
[[email protected] sunmeng]# shutdown -r +3 "3分钟后关机重启"
Shutdown scheduled for 三 2016-06-29 19:47:26 PDT, use ‘shutdown -c‘ to cancel.
[[email protected] sunmeng]#
Broadcast message from root[email protected] (Wed 2016-06-29 19:44:26 PDT):
3分钟后关机重启
The system is going down for reboot at Wed 2016-06-29 19:47:26 PDT!
[[email protected] sunmeng]# shutdown -c
Broadcast message from [email protected] (Wed 2016-06-29 19:44:50 PDT):
The system shutdown has been cancelled at Wed 2016-06-29 19:45:50 PDT!
5)shutdown -k并不会真正关机,仅仅是给各登录的用户发送提醒
[[email protected] sunmeng]# shutdown -k "Warning:Maybe the system will be shutdown."
Failed to parse time specification: Warning:Maybe the system will be shutdown.
[[email protected] sunmeng]# shutdown -k 5 "Warning:Maybe the system will be shutdown."
Shutdown scheduled for 三 2016-06-29 19:53:56 PDT, use ‘shutdown -c‘ to cancel.
[[email protected] sunmeng]#
Broadcast message from [email protected] (Wed 2016-06-29 19:48:56 PDT):
Warning:Maybe the system will be shutdown.
The system is going down for power-off at Wed 2016-06-29 19:53:56 PDT!
6)快速或慢速重启(Unbuntu有-f或-F参数,CentOS没有)
shutdown -f [time] //快速重启,忽略磁盘检查
shutdown -F [time] //强制磁盘检查
(5)其他:
1)永久更改系统时间:
//date命令只能暂时更改系统时间,关机重启后时间又会回到之前,所以需要将时间写入bios
[[email protected] sunmeng]# date -s "2016-06-30 11:05:10"
2016年 06月 30日 星期四 11:04:30 PDT
[[email protected] sunmeng]# clock -w
2)显示机器的处理器架构:
[[email protected] sunmeng]# arch
x86_64
3)其他关机命令:
init 0 //关机
init 6 //关机重启
reboot //关机重启
4)clock与date命令:
//只有超级用户才能设置硬件时钟。
[[email protected] ~]$ su root
密码:
[[email protected] sunmeng]# clock --set --date="05/04/2013 14:30:01" //设置硬件时间为2013年
[[email protected] sunmeng]# clock
2013年05月04日 星期六 14时30分12秒 -0.388214 秒
[[email protected] sunmeng]# date //此时硬件时间为2013,系统时间为2016
2016年 06月 29日 星期三 20:20:36 PDT
[[email protected] sunmeng]# clock -s //根据硬件时间设置系统时间
[[email protected] sunmeng]# date
2013年 05月 04日 星期六 14:31:04 PDT
[[email protected] sunmeng]# clock
2013年05月04日 星期六 14时31分09秒 -0.101952 秒 //系统时间和硬件时间都为2013年
[[email protected] sunmeng]# date -s "2016-06-30 11:22:10" //设置系统时间为2016年
2016年 06月 30日 星期四 11:22:10 PDT
[[email protected] sunmeng]# clock //系统时间为2016年,硬件时间为2013
2013年05月04日 星期六 14时32分13秒 -0.559223 秒
[[email protected] sunmeng]# clock -w //根据系统时间设置硬件时间
[[email protected] sunmeng]# date
2016年 06月 30日 星期四 11:22:51 PDT
[[email protected] sunmeng]# clock
2016年06月30日 星期四 11时22分56秒 -0.968643 秒
5)显示本机shell的信息,也可以更改shell
[[email protected] ~]$ chsh -l
/bin/sh
/bin/bash
/sbin/nologin
/usr/bin/sh
/usr/bin/bash
/usr/sbin/nologin
/bin/tcsh
/bin/csh
[[email protected] ~]$ chsh -v
chsh,来自 util-linux 2.23.2
每天一个Linux命令的最后一篇,以后还会详细介绍Linux系统的其他相关知识。
时间: 06-30