xenserver 安装新硬盘_xenserver挂载新硬盘

注意:新加硬盘请不要加入raid,否则不认盘

一:

1.1:查看磁盘列表

fdisk -l

[root@xenserver zz]# fdisk -l

Disk /dev/sdb: 7999.4 GB, 7999376588800 bytes, 15623782400 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk label type: dos

Disk identifier: 0x00000000

Device Boot Start End Blocks Id System

/dev/sdb1 * 1 4294967295 2147483647+ ee GPT

Disk /dev/sda: 2000.4 GB, 2000398934016 bytes, 3907029168 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk label type: dos

Disk identifier: 0x0000023f

Device Boot Start End Blocks Id System

Disk /dev/mapper/VG_XenStorage--342bacfc--f135--104c--bd2b--9963ffa9b0bb-MGT: 4 MB, 4194304 bytes, 8192 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

1.2:建立分区

fdisk /dev/sda

[root@xenserver zz]# fdisk /dev/sda

Welcome to fdisk (util-linux 2.23.2).

Changes will remain in memory only, until you decide to write them.

Be careful before using the write command.

Command (m for help): m

Command action

a toggle a bootable flag

b edit bsd disklabel

c toggle the dos compatibility flag

d delete a partition

g create a new empty GPT partition table

G create an IRIX (SGI) partition table

l list known partition types

m print this menu

n add a new partition

o create a new empty DOS partition table

p print the partition table

q quit without saving changes

s create a new empty Sun disklabel

t change a partition's system id

u change display/entry units

v verify the partition table

w write table to disk and exit

x extra functionality (experts only)

Command (m for help): n

Partition type:

p primary (0 primary, 0 extended, 4 free)

e extended

Select (default p):

Using default response p

Partition number (1-4, default 1):

First sector (2048-3907029167, default 2048):

Using default value 2048

Last sector, +sectors or +size{K,M,G} (2048-3907029167, default 3907029167):

Using default value 3907029167

Partition 1 of type Linux and of size 1.8 TiB is set

Command (m for help): m

Command action

a toggle a bootable flag

b edit bsd disklabel

c toggle the dos compatibility flag

d delete a partition

g create a new empty GPT partition table

G create an IRIX (SGI) partition table

l list known partition types

m print this menu

n add a new partition

o create a new empty DOS partition table

p print the partition table

q quit without saving changes

s create a new empty Sun disklabel

t change a partition's system id

u change display/entry units

v verify the partition table

w write table to disk and exit

x extra functionality (experts only)

Command (m for help): w

The partition table has been altered!

Calling ioctl() to re-read partition table.

Syncing disks.

1.3:格式化分区

mkfs.ext4 /dev/sda

[root@xenserver zz]# mkfs.ext4 /dev/sda

mke2fs 1.42.9 (28-Dec-2013)

/dev/sda is entire device, not just one partition!

Proceed anyway? (y,n) y

Filesystem label=

OS type: Linux

Block size=4096 (log=2)

Fragment size=4096 (log=2)

Stride=0 blocks, Stripe width=0 blocks

122101760 inodes, 488378646 blocks

24418932 blocks (5.00%) reserved for the super user

First data block=0

Maximum filesystem blocks=2636120064

14905 block groups

32768 blocks per group, 32768 fragments per group

8192 inodes per group

Superblock backups stored on blocks:

32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,

4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,

102400000, 214990848

Allocating group tables: done

Writing inode tables: done

Creating journal (32768 blocks): done

Writing superblocks and filesystem accounting information: done

[root@xenserver zz]# df -h

Filesystem Size Used Avail Use% Mounted on

devtmpfs 2.0G 0 2.0G 0% /dev

tmpfs 2.0G 120K 2.0G 1% /dev/shm

tmpfs 2.0G 1.5M 2.0G 1% /run

tmpfs 2.0G 0 2.0G 0% /sys/fs/cgroup

/dev/sdb1 18G 2.1G 15G 13% /

xenstore 2.0G 0 2.0G 0% /var/lib/xenstored

/dev/loop0 45M 45M 0 100% /var/xen/xc-install

/dev/sdb5 3.9G 245M 3.4G 7% /var/log

tmpfs 393M 0 393M 0% /run/user/0

[root@xenserver zz]# fdisk -l

Disk /dev/sdb: 7999.4 GB, 7999376588800 bytes, 15623782400 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk label type: dos

Disk identifier: 0x00000000

Device Boot Start End Blocks Id System

/dev/sdb1 * 1 4294967295 2147483647+ ee GPT

Disk /dev/sda: 2000.4 GB, 2000398934016 bytes, 3907029168 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk /dev/mapper/VG_XenStorage--342bacfc--f135--104c--bd2b--9963ffa9b0bb-MGT: 4 MB, 4194304 bytes, 8192 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

1.4:创建挂载点

mkdir /data

1.5:挂载

mount /dev/sda /data

[root@xenserver /]# mount /dev/sda /data

[root@xenserver /]# df -h

Filesystem      Size  Used Avail Use% Mounted on

devtmpfs        2.0G     0  2.0G   0% /dev

tmpfs           2.0G  120K  2.0G   1% /dev/shm

tmpfs           2.0G  1.5M  2.0G   1% /run

tmpfs           2.0G     0  2.0G   0% /sys/fs/cgroup

/dev/sdb1        18G  2.1G   15G  13% /

xenstore        2.0G     0  2.0G   0% /var/lib/xenstored

/dev/loop0       45M   45M     0 100% /var/xen/xc-install

/dev/sdb5       3.9G  246M  3.4G   7% /var/log

tmpfs           393M     0  393M   0% /run/user/0

/dev/sda        1.8T   77M  1.7T   1% /data

1.6:开机自动挂载

vim /etc/fstab

添加

/dev/sda     /data        ext4     defaults  0 0

LABEL=root-gjnvrn / ext3 defaults 1 1

LABEL=swap-gjnvrn swap swap defaults 0 0

LABEL=logs-gjnvrn /var/log ext3 defaults 0 2

/opt/xensource/packages/iso/XenCenter.iso /var/xen/xc-install iso9660 loop,ro 0 0

/dev/sda /data ext4 defaults 0 0

感谢:

https://jingyan.baidu.com/article/a681b0de5b46db3b184346fc.html

  • 0
    点赞
  • 1
    收藏
    觉得还不错? 一键收藏
  • 0
    评论

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值