linux 2.6.35 arm map_lowmem,近期入手的新玩具PogoPlug Pro

[    6.240000] ------------[ cut here ]------------

[    6.240000] WARNING: at drivers/net/wireless/ath/ath9k/pci.c:132 ath_pci_aspm_init+0x4c/0xac()

[    6.240000] Modules linked in:

[    6.240000] Backtrace:

[    6.240000] [] (dump_backtrace+0x0/0x118) from [] (dump_stack+0x20/0x24)

[    6.240000]  r6:c06fec12 r5:00000084 r4:00000000 r3:00000000

[    6.240000] [] (dump_stack+0x0/0x24) from [] (warn_slowpath_common+0x5c/0x74)

[    6.240000] [] (warn_slowpath_common+0x0/0x74) from [] (warn_slowpath_null+0x2c/0x34)

[    6.240000]  r8:c05d2500 r7:c7b9e0d0 r6:c7b9c000 r5:c7b9c01c r4:c7b9c000

[    6.240000] r3:00000009

[    6.240000] [] (warn_slowpath_null+0x0/0x34) from [] (ath_pci_aspm_init+0x4c/0xac)

[    6.240000] [] (ath_pci_aspm_init+0x0/0xac) from [] (ath9k_hw_init+0x564/0xa1c)

[    6.240000]  r4:00000001

[    6.240000] [] (ath9k_hw_init+0x0/0xa1c) from [] (ath9k_init_device+0x1d4/0x700)

[    6.240000] [] (ath9k_init_device+0x0/0x700) from [] (ath_pci_probe+0x234/0x2f0)

[    6.240000] [] (ath_pci_probe+0x0/0x2f0) from [] (pci_device_probe+0x94/0x11c)

[    6.240000] [] (pci_device_probe+0x0/0x11c) from [] (driver_probe_device+0xd8/0x194)

[    6.240000] [] (driver_probe_device+0x0/0x194) from [] (__driver_attach+0x70/0x94)

[    6.240000]  r7:00000000 r6:c079a894 r5:c780e894 r4:c780e860

[    6.240000] [] (__driver_attach+0x0/0x94) from [] (bus_for_each_dev+0x60/0x9c)

[    6.240000]  r6:c03646d4 r5:c7869ed0 r4:c079a894 r3:00000000

[    6.240000] [] (bus_for_each_dev+0x0/0x9c) from [] (driver_attach+0x28/0x30)

[    6.240000]  r7:00000000 r6:c078ed40 r5:c7b81060 r4:c079a894

[    6.240000] [] (driver_attach+0x0/0x30) from [] (bus_add_driver+0xc0/0x240)

[    6.240000] [] (bus_add_driver+0x0/0x240) from [] (driver_register+0xb8/0x148)

[    6.240000] [] (driver_register+0x0/0x148) from [] (__pci_register_driver+0x50/0xc8)

[    6.240000] [] (__pci_register_driver+0x0/0xc8) from [] (ath_pci_init+0x24/0x30)

[    6.240000]  r7:00000013 r6:00000000 r5:c074eccc r4:00000000

[    6.240000] [] (ath_pci_init+0x0/0x30) from [] (ath9k_init+0x2c/0x68)

[    6.240000] [] (ath9k_init+0x0/0x68) from [] (do_one_initcall+0xa0/0x170)

[    6.240000]  r4:c076e0d8 r3:c7868000

[    6.240000] [] (do_one_initcall+0x0/0x170) from [] (kernel_init+0xdc/0x180)

[    6.240000]  r9:00000000 r8:00000000 r7:00000013 r6:c00354e4 r5:c076e1a0

[    6.240000] r4:c076e0d8

[    6.240000] [] (kernel_init+0x0/0x180) from [] (do_exit+0x0/0x714)

[    6.240000]  r5:c0734814 r4:00000000

[    6.240000] ---[ end trace 426ab14eb28e5d8b ]---

[    6.290000] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf5000000, irq=51

[    6.290000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    6.290000] Initializing Oxnas-SoC USB Host Controller

[    6.290000] oxnas-ehci oxnas-ehci.0: OXNAS EHCI

[    6.290000] oxnas-ehci oxnas-ehci.0: new USB bus registered, assigned bus number 1

[    6.320000] oxnas-ehci oxnas-ehci.0: irq 39, io mem 0x40200100

[    6.340000] oxnas-ehci oxnas-ehci.0: USB 2.0 started, EHCI 1.00

[    6.340000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    6.340000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    6.340000] usb usb1: Product: OXNAS EHCI

[    6.340000] usb usb1: Manufacturer: Linux 3.1.10 ehci_hcd

[    6.340000] usb usb1: SerialNumber: oxnas-ehci.0

[    6.600000] hub 1-0:1.0: USB hub found

[    6.610000] hub 1-0:1.0: 2 ports detected

[    6.610000] usbcore: registered new interface driver uas

[    6.620000] Initializing USB Mass Storage driver...

[    6.620000] usbcore: registered new interface driver usb-storage

[    6.630000] USB Mass Storage support registered.

[    6.630000] mousedev: PS/2 mouse device common for all mice

[    6.640000] ox820_led_gpio: initialized

[    6.640000] usbcore: registered new interface driver usbhid

[    6.650000] usbhid: USB HID core driver

[    6.650000] oprofile: using arm/mpcore

[    6.660000] TCP cubic registered

[    6.660000] NET: Registered protocol family 10

[    6.670000] IPv6 over IPv4 tunneling driver

[    6.680000] NET: Registered protocol family 17

[    6.680000] VFP support v0.3: not present

[    6.760000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[    6.930000] usb 1-1: new high speed USB device number 2 using oxnas-ehci

[    7.080000] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608

[    7.080000] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0

[    7.090000] usb 1-1: Product: USB2.0 Hub

[    7.100000] hub 1-1:1.0: USB hub found

[    7.100000] hub 1-1:1.0: 4 ports detected

[    7.110000] ata1.00: ATA-8: WDC WD1600BEVT-22ZCT0, 11.01A11, max UDMA/133

[    7.120000] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 0/32)

[    7.130000] ata1.00: configured for UDMA/133

[    7.130000] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600BEVT-2 11.0 PQ: 0 ANSI: 5

[    7.140000] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)

[    7.150000] sd 0:0:0:0: Attached scsi generic sg0 type 0

[    7.160000] sd 0:0:0:0: [sda] Write Protect is off

[    7.160000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    7.180000]  sda: sda1 sda2 sda3

[    7.180000] sd 0:0:0:0: [sda] Attached SCSI disk

[    7.510000] ata2: SATA link down (SStatus 0 SControl 300)

[    7.620000] kjournald starting.  Commit interval 5 seconds

[    7.620000] EXT3-fs (sda3): using internal journal

[    7.630000] EXT3-fs (sda3): mounted filesystem with ordered data mode

[    7.640000] VFS: Mounted root (ext3 filesystem) on device 8:3.

[    7.670000] devtmpfs: mounted

[    7.680000] Freeing init memory: 244K

INIT: version 2.88 booting

[info] Using makefile-style concurrent boot in runlevel S.

[....] Starting the hotplug events dispatcher: udevd[    9.790000] udevd[168]: starting version 175

. ok

[....] Synthesizing the initial hotplug events...done.

[....] Waiting for /dev to be fully populated...done.

[....] Setting parameters of disc: (none). ok

[....] Activating swap...done.

[....] Cleaning up temporary files.... ok

[....] Activating lvm and md swap...done.

[....] Checking file systems...fsck from util-linux 2.20.1

done.

[....] Mounting local filesystems...done.

[....] Activating swapfile swap...done.

[....] Cleaning up temporary files.... ok

[....] Setting kernel variables ...done.

[....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2

Copyright 2004-2011 Internet Systems Consortium.

All rights reserved.

For info, please visit https://www.isc.org/software/dhcp/

[   22.780000] eth0: PHY is Realtek RTL8211D, type 0x001cc914

[   22.790000] Offload is not active on eth0

[   22.790000] Alloc'ing ARM descs 10240 bytes

[   22.800000] eth0: Resetting GMAC

[   22.800000] eth0: GMAC reset complete

[   22.810000] eth0: Setting Rx flow control thresholds for LAN port

[   23.360000] eth0: PHY is Realtek RTL8211D, type 0x001cc914

[   25.820000] ADDRCONF(NETDEV_UP): eth0: link is not ready

Listening on LPF/eth0/00:30:e0:00:00:00

Sending on   LPF/eth0/00:30:e0:00:00:00

Sending on   Socket/fallback

DHCPREQUEST on eth0 to 255.255.255.255 port 67

[   26.860000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

DHCPREQUEST on eth0 to 255.255.255.255 port 67

DHCPREQUEST on eth0 to 255.255.255.255 port 67

[   35.410000] eth0: PHY is Realtek RTL8211D, type 0x001cc914

DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6

DHCPREQUEST on eth0 to 255.255.255.255 port 67

DHCPOFFER from 172.16.0.254

DHCPACK from 172.16.0.254

Reloading /etc/samba/smb.conf: smbd only.

bound to 172.16.0.174 -- renewal in 21108 seconds.

done.

[....] Cleaning up temporary files.... ok

INIT: Entering runlevel: 2

[info] Using makefile-style concurrent boot in runlevel 2.

[....] Starting enhanced syslogd: rsyslogd. ok

[....] Starting periodic command scheduler: cron. ok

[....] Starting system message bus: dbus. ok

Starting FTP server: vsftpd.

[....] Starting internet superserver: inetd. ok

[....] Starting Samba daemons: nmbd smbd. ok

[....] Starting OpenBSD Secure Shell server: sshd. ok

Debian GNU/Linux 7.0 PogoPlug-Pro ttyS0

PogoPlug-Pro login: root

Password:

Last login: Thu Jan  1 00:21:59 UTC 1970 from lintel-thinkpad-t430.lan on pts/1

Linux PogoPlug-Pro 3.1.10 #5 SMP Thu Jun 6 14:45:04 CST 2013 armv6l

The programs included with the Debian GNU/Linux system are free software;

the exact distribution terms for each program are described in the

individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent

permitted by applicable law.

root@PogoPlug-Pro:~#

root@PogoPlug-Pro:~# hdparm -tT /dev/sda

/dev/sda:

Timing cached reads:   468 MB in  2.00 seconds = 233.78 MB/sec

Timing buffered disk reads: 140 MB in  3.00 seconds =  46.66 MB/sec

root@PogoPlug-Pro:~#