IO: 向设备输入数据和输出数据C++的IO流
c++中,必须通过特定的已经定义好的类, 来处理IO(输入输出)
文件流: 对文件进行读写操作
头文件:
类库:
ifstream 对文件输入(读文件)
ofstream 对文件输出(写文件)
fstream 对文件输入或输出
//写文件
#include #include #include using namespace std;int main(){ string name; int age; ofstream outfile; //也可以使用fstream, 但是fstream的默认打开方式不截断文件长度 // ofstream的默认打开方式是, 截断式写入 ios::out | ios::trunc // fstream的默认打开方式是, 截断式写入 ios::out // 建议指定打开方式 outfile.open("user.txt", ios::out | ios::trunc); while (1) { cout << "请输入姓名: [ctrl+z退出] "; cin >> name; if (cin.eof()) { //判断文件是否结束 break; } outfile << name << "\t"; cout << "请输入年龄: "; cin >> age; outfile << age << endl; //文本文件写入 } // 关闭打开的文件 outfile.close(); system("pause"); return 0;}
//读文件
#include #include #include using namespace std;int main(){ string name; int age; ifstream infile; infile.open("user.txt"); while (1) { infile >> name; if (infile.eof()) { //判断文件是否结束 break; } cout << name << "\t"; infile >> age; cout << age << endl; } // 关闭打开的文件 infile.close(); system("pause"); return 0;}
对二进制文件流读写
文本文件和二进制文件的区别?
文本文件:写数字1, 实际写入的是 ‘1’
二进制文件:写数字1, 实际写入的是 整数1(4个字节,最低字节是1, 高3个字节都是0)
写字符‘R’实际输入的还是‘R’
写二进制文件
使用文件流对象的write方法写入二进制数据.
//写二进制文件
#include #include #include using namespace std;int main(){ string name; int age; ofstream outfile; outfile.open("user.dat", ios::out | ios::trunc | ios::binary); while (1) { cout << "请输入姓名: [ctrl+z退出] "; cin >> name; if (cin.eof()) { //判断文件是否结束 break; } outfile << name << "\t"; cout << "请输入年龄: "; cin >> age; //outfile << age << endl; //会自动转成文本方式写入 outfile.write((char*)&age, sizeof(age)); } // 关闭打开的文件 outfile.close(); system("pause"); return 0;}
//读二进制文件
使用文件流对象的read方法.
#include #include #include using namespace std;int main(){ string name; int age; ifstream infile; infile.open("user.dat", ios::in | ios::binary); while (1) { infile >> name; if (infile.eof()) { //判断文件是否结束 break; } cout << name << "\t"; // 跳过中间的制表符 char tmp; infile.read(&tmp, sizeof(tmp)); //infile >> age; //从文本文件中读取整数, 使用这个方式 infile.read((char*)&age, sizeof(age)); cout << age << endl; //文本文件写入 } // 关闭打开的文件 infile.close(); system("pause"); return 0;}
对文件流按格式读写取数据
使用stringstream
#include #include #include #include using namespace std;int main(){ string name; int age; ofstream outfile; outfile.open("user.txt", ios::out | ios::trunc); while (1) { cout << "请输入姓名: [ctrl+z退出] "; cin >> name; if (cin.eof()) { //判断文件是否结束 break; } cout << "请输入年龄: "; cin >> age; stringstream s; s << "name:" << name << "\t\tage:" << age << endl; outfile << s.str(); } // 关闭打开的文件 outfile.close(); system("pause"); return 0;}
按指定格式读文件
没有优雅的C++解决方案, 使用C语言的sscanf
#include #include #include #include #include using namespace std;int main(void){ char name[32]; int age; string line; ifstream infile; infile.open("user.txt"); while (1) { getline(infile, line); if (infile.eof()) { //判断文件是否结束 break; } sscanf_s(line.c_str(), "姓名:%s 年龄:%d", name, sizeof(name),&age); cout << "姓名:" << name << "\t\t年龄:" << age << endl; } infile.close(); system("pause"); return 0;}
文件流的状态检查
s.is_open( ) | 文件流是否打开成功, |
s.eof( ) | 流s是否结束 |
s.fail( ) | 1、流s的failbit或者badbit被置位时, 返回true 2、failbit: 出现非致命错误,可挽回, 一般是软件错误 |
s.bad( ) | 1、badbit置位, 出现致命错误, 一般是硬件错误或系统底层错误, 不可挽回 2、流s的badbit置位时, 返回true |
s.good( ) | 流s处于有效状态时, 返回true |
s.clear( ) | 流s的所有状态都被复位 |
文件流的定位
seekg( off_type offset, //偏移量
ios::seekdir origin ); //起始位置
作用:设置输入流的位置
参数1:偏移量
参数2:相对位置
beg 相对于开始位置
cur 相对于当前位置
end 相对于结束位置
读取当前程序的最后50个字符
#include #include #include using namespace std;int main(void) { ifstream infile; infile.open("定位.cpp"); if (!infile.is_open()) { return 1; } infile.seekg(-50, infile.end); while (!infile.eof()) { string line; getline(infile, line); cout << line << endl; } infile.close(); system("pause"); return 0;}
//tellg返回该输入流的当前位置(距离文件的起始位置的偏移量)
获取当前文件的长度
#include #include #include using namespace std;int main(void) { ifstream infile; infile.open("定位.cpp"); if (!infile.is_open()) { return 1; } // 先把文件指针移动到文件尾 infile.seekg(0, infile.end); int len = infile.tellg(); cout << "len:" << len; infile.close(); system("pause"); return 0;}
seekp设置该输出流的位置
先向新文件写入:“123456789”
然后再在第4个字符位置写入“ABC”
#include #include #include using namespace std;int main(void) { ofstream outfile; outfile.open("test.txt"); if (!outfile.is_open()) { return 1; } outfile << "123456789"; outfile.seekp(4, outfile.beg); outfile << "ABC"; outfile.close(); system("pause"); return 0;}
计算机英语
io | input output的简写 |
输出输出
ios C++ | 输出输出流的基类 |
stream | 流 |
istream | 输入流 |
ostream | 输出流 |
iostream | 输出输出流 |
fstream | (file stream的简写) 文件流 |
ifstream | 文件输入流 |
ofstream | 文件输出流 |
stringstream | 字符串流 |
istringstream | 字符串输入流 |
ostringstream | 字符串输出流 |
seek | 寻找 |
seekg | 设置输入流的位置 |
seekp | 设置输出流的位置 |
tell | 告诉 |
tellg | 返回当前流的位置 |
open | 打开 |
is_open | 是否打开成功 |
eof | end of file的简写 |
文件结束
good | 好的 |
bad | 坏的 |
fail | 失败 |