原题描述:
在经典的汉诺塔问题中,有 3 个塔和 N 个可用来堆砌成塔的不同大小的盘子。要求盘子必须按照从小到大的顺序从上往下堆 (如,任意一个盘子,其必须堆在比它大的盘子上面)。同时,你必须满足以下限制条件:
(1) 每次只能移动一个盘子。
(2) 每个盘子从堆的顶部被移动后,只能置放于下一个堆中。
(3) 每个盘子只能放在比它大的盘子上面。
请写一段程序,实现将第一个堆的盘子移动到最后一个堆中。
您在真实的面试中是否遇到过这个题?
Yes
样例
题目分析
将整个移动过程分为3个步骤:
状态0: 状态1:
towers[0] : [n,n-1,...,2,1,0] towers[0] : [n]
towers[1] : [] towers[1] : [n-1,n-2,...,2,1,0]
towers[2] : [] towers[2] : []
状态2: 状态3:
towers[0] : [] towers[0] : []
towers[1] : [n-1,n-2,...,2,1,0] towers[1] : []
towers[2] : [n] towers[2] : [n,n-1,...,2,1,0]
一、状态0 ——> 状态1,其实就是将原塔上的n-1块盘子移动到过程塔上;
二、状态1 ——> 状态2,将原塔的第n块盘子移动到目标塔上;
三、状态2 ——> 状态3,其实就是简化的原题要求,到这里就是重复0-1-2过程;
由于目标塔上的盘子大小是n,大于剩下的所有盘子,所以等同于空塔~
这里只是原塔变成了过程塔,目标塔还是目标塔,过程塔变成了原塔;
状态2: 变化状态2:
towers[0] : [] towers[1] : [n-1,n-2,...,2,1,0]
towers[1] : [n-1,n-2,...,2,1,0] towers[0] : []
towers[2] : [n] towers[2] : [n]
然后重复此过程,直至n=0:
状态0 ——> 状态1——> 状态2(另一种形式的状态0)——> 状态1——> 状态2——> 。。。——> 状态3
当n=0时,即达到状态3.
参考分析资料:
http://www.cnblogs.com/shenxiaoquan/p/5914896.html
源码实现:
class Tower(object):
# create three towers (i from 0 to 2)
def __init__(self, i):
self.disks = []
# Add a disk into this tower
def add(self, d):
if len(self.disks) > 0 and self.disks[-1] <= d:
print "Error placing disk %s" % d
else:
self.disks.append(d);
# @param {Tower} t a tower
# Move the top disk of this tower to the top of t.
def move_top_to(self, t):
# Write your code here
if len(self.disks) > 0:
t.disks.append(self.disks.pop())
# @param {int} n an integer
# @param {Tower} destination a tower
# @param {Tower} buffer a tower
# Move n Disks from this tower to destination by buffer tower
def move_disks(self, n, destination, buffer):
# Write your code here
if n == 0:
return
if n == 1:
self.move_top_to(destination)
else:
# 状态0-状态1,实现将除了n的其他盘子移动到buffer塔上
self.move_disks(n-1,buffer,destination)
# 状态1-状态2,实现将最后一个n盘移动到destination塔上
self.move_top_to(destination)
# 状态2-状态3(0),转化buffer塔为原塔,将剩下的n-1个盘子移动到destination塔上
buffer.move_disks(n-1,destination,self)
def get_disks(self):
return self.disks
"""
Your Tower object will be instantiated and called as such:
towers = [Tower(0), Tower(1), Tower(2)]
for i in xrange(n - 1, -1, -1): towers[0].add(i)
towers[0].move_disks(n, towers[2], towers[1])
print towers[0], towers[1], towers[2]
"""