RationalDMIS2024相对测量（参考测量）_EQ


RationalDMIS2024相对测量（参考测量）_RATIONALDMIS_02


RationalDMIS2024相对测量（参考测量）_EQ_03

F(K-6)=FEAT/CIRCLE,INNER,CART,56.0000,27.2872,35.0000,0.0000,-0.0000,1.0000, 10.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 110.6228, 90.4967, 56.4941
RMEAS/CIRCLE, F(K-6), 5, FA(CIR1), XDIR, FA(CIR1), YDIR, FA(PLN2), ZDIR
  GOTO/CART,   110.6228, 90.4967, 56.4941
  GOTO/CART,    54.4941, 27.2872, 56.4941
  PTMEAS/CART,  51.0000, 27.2872, 32.0000,  1.0000,  0.0000, 0.0000
  PTMEAS/CART,  54.4549, 32.0425, 32.0000,  0.3090, -0.9511, 0.0000
  PTMEAS/CART,  60.0451, 30.2261, 32.0000, -0.8090, -0.5878, 0.0000
  PTMEAS/CART,  60.0451, 24.3483, 32.0000, -0.8090,  0.5878, 0.0000
  PTMEAS/CART,  54.4549, 22.5319, 32.0000,  0.3090,  0.9511, 0.0000
  GOTO/CART,    55.5346, 25.8551, 56.4941
ENDMES
  • 1.
  • 2.
  • 3.
  • 4.
  • 5.
  • 6.
  • 7.
  • 8.
  • 9.
  • 10.
  • 11.
  • 12.
  • 13.

RationalDMIS2024相对测量（参考测量）_EQ_04


RationalDMIS2024相对测量（参考测量）_RATIONALDMIS_05


RationalDMIS2024相对测量（参考测量）_EQ_06


RationalDMIS2024相对测量（参考测量）_EQ_07

RationalDMIS2024相对测量（参考测量）_RATIONALDMIS_08

$$/*  Header
DMISMN/'Created by [山涧果子] 
UNITS/MM, ANGDEC, MMPS
WKPLAN/XYPLAN
PRCOMP/ON
TECOMP/ON
FLY/1.0000
MODE/PROG, MAN
SNSET/APPRCH, 2.0000
SNSET/RETRCT, 2.0000
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 5.0000
SNSET/CLRSRF, 20.0000
RECALL/D(MCS)
SNSLCT/S(D3-L20)
GEOALG/BF, LSTSQR
GEOALG/ANGLB, COMPLM
GEOALG/CIRCLE, LSTSQR
GEOALG/ARC, LSTSQR
GEOALG/PLANE, LSTSQR
$$
$$
$$*/
MODE/MAN
$$ Following block is generated by Quick 321 alignment
DECL/COMMON, DOUBLE, DPROBEX, DPROBEY, DPROBEZ
PRCOMP/OFF
KNPTC1 = VALUE/MODE
MODE/MAN
F(PT1)=FEAT/POINT,CART,451.2997,286.6398,52.9338,0.0000,0.0000,1.0000
F(PT2)=FEAT/POINT,CART,450.7383,225.6662,52.9599,0.0000,0.0000,1.0000
F(PT3)=FEAT/POINT,CART,529.1880,207.0594,53.0634,0.0000,0.0000,1.0000
F(PT4)=FEAT/POINT,CART,448.7300,192.7016,31.3976,0.0000,-1.0000,0.0000
F(PT5)=FEAT/POINT,CART,503.6090,192.8592,31.3993,0.0000,-1.0000,0.0000
F(PT6)=FEAT/POINT,CART,441.9888,214.5667,46.3398,-1.0000,0.0000,0.0000
MEAS/POINT, F(PT1), 1
  PTMEAS/CART, 451.2997,286.6398,52.9338,0.0000,0.0000,1.0000
ENDMES
MEAS/POINT, F(PT2), 1
  PTMEAS/CART, 450.7383,225.6662,52.9599,0.0000,0.0000,1.0000
ENDMES
MEAS/POINT, F(PT3), 1
  PTMEAS/CART, 529.1880,207.0594,53.0634,0.0000,0.0000,1.0000
ENDMES
MEAS/POINT, F(PT4), 1
  PTMEAS/CART, 448.7300,192.7016,31.3976,0.0000,-1.0000,0.0000
ENDMES
MEAS/POINT, F(PT5), 1
  PTMEAS/CART, 503.6090,192.8592,31.3993,0.0000,-1.0000,0.0000
ENDMES
MEAS/POINT, F(PT6), 1
  PTMEAS/CART, 441.9888,214.5667,46.3398,-1.0000,0.0000,0.0000
ENDMES
KNPTR1 = OBTAIN/FA(PT1)[1], 5
KNPTR2 = OBTAIN/FA(PT1)[1], 6
KNPTR3 = OBTAIN/FA(PT1)[1], 7
F(PLN1) = FEAT/PLANE, CART, 0,0,0, KNPTR1,KNPTR2,KNPTR3
CONST/PLANE, F(PLN1), BF, FA(PT1), FA(PT2), FA(PT3)
KNPTR1 = OBTAIN/FA(PT4), 3
KNPTR2 = OBTAIN/FA(PT4), 4
KNPTR3 = OBTAIN/FA(PT4), 5
KNPTV1 = ASSIGN/VCART(KNPTR1,KNPTR2,KNPTR3)
KNPTR1 = OBTAIN/FA(PT5), 3
KNPTR2 = OBTAIN/FA(PT5), 4
KNPTR3 = OBTAIN/FA(PT5), 5
KNPTV2 = ASSIGN/VCART(KNPTR1,KNPTR2,KNPTR3)
KNPTV3 = ASSIGN/KNPTV2 - KNPTV1
KNPTV1 = ASSIGN/VUNIT(KNPTV3)
KNPTR1 = OBTAIN/FA(PT4)[1], 5
KNPTR2 = OBTAIN/FA(PT4)[1], 6
KNPTR3 = OBTAIN/FA(PT4)[1], 7
F(LN1) = FEAT/LINE, UNBND, CART, 0.0000, 0.0000, 0.0000, VECX(KNPTV1), VECY(KNPTV1), VECZ(KNPTV1), KNPTR1, KNPTR2, KNPTR3
CONST/LINE, F(LN1), BF, FA(PT4), FA(PT5)
D(CRD1) =DATSET/FA(PLN1), ZDIR, ZORIG
D(CRD1) =ROTATE/ZAXIS, FA(LN1), XDIR
D(CRD1) =TRANS/YORIG, FA(LN1)
D(CRD1) =TRANS/XORIG, FA(PT6)
KNPTC1 =VALUE/SNSLCT
KNPTR1 =OBTAIN/SS(KNPTC1), 8
DPROBEZ =ASSIGN/(KNPTR1/2)
KNPTR1 = OBTAIN/FA(PT4)[1], 5
KNPTR2 = OBTAIN/FA(PT4)[1], 6
KNPTR3 = OBTAIN/FA(PT4)[1], 7
KNPTV1 = ASSIGN/VCART(KNPTR1,KNPTR2,KNPTR3)
KNPTV2 = ASSIGN/VCART(0,1,0)
IF/(VDOT(KNPTV1,KNPTV2) .GT. 0)
  DPROBEY = ASSIGN/(-DPROBEZ)
ELSE
  DPROBEY = ASSIGN/DPROBEZ
ENDIF
KNPTR1 = OBTAIN/FA(PT6)[1], 5
KNPTR2 = OBTAIN/FA(PT6)[1], 6
KNPTR3 = OBTAIN/FA(PT6)[1], 7
KNPTV1 = ASSIGN/VCART(KNPTR1,KNPTR2,KNPTR3)
KNPTV2 = ASSIGN/VCART(1,0,0)
IF/(VDOT(KNPTV1,KNPTV2) .GT. 0)
  DPROBEX = ASSIGN/(-DPROBEZ)
ELSE
  DPROBEX = ASSIGN/DPROBEZ
ENDIF
D(CRD1) =TRANS/XORIG, DPROBEX, YORIG, DPROBEY, ZORIG, -DPROBEZ
D(CRD1) =TRANS/ZORIG, -35
PRCOMP/ON
IF/KNPTC1.EQ.'AUTO,PROG,MAN'
    MODE/AUTO,PROG,MAN
ENDIF
IF/KNPTC1.EQ.'PROG,MAN'
    MODE/PROG,MAN
ENDIF
IF/KNPTC1.EQ.'MAN'
    MODE/MAN
ENDIF
$$ Set.CAD2PCS.CADM_1
MODE/PROG,MAN
F(PLN2)=FEAT/PLANE,CART,31.2500,46.8106,35.0000,0.0000,0.0000,1.0000
SNSET/APPRCH, 2.0000
SNSET/RETRCT, 2.0000
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 5.0000
SNSET/CLRSRF, F(PLN2), 20.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, -3.4965, 18.6627, 56.4941
MEAS/PLANE, F(PLN2), 10
  GOTO/CART,    -3.4965, 18.6627, 56.4941
  GOTO/CART,     5.0026, 28.0286, 56.4941
  PTMEAS/CART,   5.0026, 28.0286, 35.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART,   3.7402, 83.7198, 35.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART,  43.0055, 87.4609, 35.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART,  93.1660, 87.5323, 35.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART,  88.4090, 59.4815, 35.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART, 117.8293, 56.6269, 35.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART, 116.9672, 41.0165, 35.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART,  92.4983, 29.9333, 35.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART,  83.2258,  9.0193, 35.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART,  42.7195, 22.8096, 35.0000, 0.0000, 0.0000, 1.0000
ENDMES
F(LN2)=FEAT/LINE,BND,CART,0.0000,-0.0000,20.0208,70.0000,0.0000,20.0208,0.0000,-1.0000,0.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 42.7164, 22.7855, 56.4941
MEAS/LINE, F(LN2), 5
  GOTO/CART,   42.7164, 22.7855, 56.4941
  GOTO/CART,    2.0000, -3.4941, 56.4941
  PTMEAS/CART,  2.0000,  0.0000, 18.0208, 0.0000, -1.0000, 0.0000
  PTMEAS/CART, 18.5000,  0.0000, 18.0208, 0.0000, -1.0000, 0.0000
  PTMEAS/CART, 35.0000,  0.0000, 18.0208, 0.0000, -1.0000, 0.0000
  PTMEAS/CART, 51.5000,  0.0000, 18.0208, 0.0000, -1.0000, 0.0000
  PTMEAS/CART, 68.0000,  0.0000, 18.0208, 0.0000, -1.0000, 0.0000
  GOTO/CART,   68.0000, -3.4941, 56.4941
ENDMES
F(LN3)=FEAT/LINE,BND,CART,0.0000,14.9792,35.0000,0.0000,93.6212,35.0000,-1.0000,0.0000,0.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, -3.4941, 16.9792, 56.4941
MEAS/LINE, F(LN3), 5
  GOTO/CART,   -3.4941, 16.9792, 56.4941
  PTMEAS/CART,  0.0000, 16.9792, 33.0000, -1.0000, 0.0000, 0.0000
  PTMEAS/CART,  0.0000, 35.6397, 33.0000, -1.0000, 0.0000, 0.0000
  PTMEAS/CART,  0.0000, 54.3002, 33.0000, -1.0000, 0.0000, 0.0000
  PTMEAS/CART,  0.0000, 72.9607, 33.0000, -1.0000, 0.0000, 0.0000
  PTMEAS/CART,  0.0000, 91.6212, 33.0000, -1.0000, 0.0000, 0.0000
  GOTO/CART,   -3.4941, 91.6212, 56.4941
ENDMES
F(PT_INTR1)=FEAT/POINT,CART,0.0000,0.0000,18.0234,-0.0000,-0.0000,1.0000
CONST/POINT,F(PT_INTR1),INTOF,FA(LN2),FA(LN3),2D
D(CRD2) = DATSET/FA(PLN2), ZDIR, ZORIG, FA(LN2), XDIR, FA(PT_INTR1), XORIG
D(CRD2) = TRANS/ZORIG, -35, YORIG, FA(PT_INTR1), XORIG, -0
$$ Set.CAD2PCS.CADM_1
F(Y+1)=FEAT/POINT,CART,85.0000,0.0000,32.0000,0.0000,-1.0000,0.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 85.0000, -3.4941, 32.0000
MEAS/POINT, F(Y+1), 1
  GOTO/CART, 85.0000,-3.4941,56.4941
  PTMEAS/CART, 85.0000,0.0000,32.0000,0.0000,-1.0000,0.0000
ENDMES
F(Y+2)=FEAT/POINT,CART,120.0000,0.0000,32.0000,0.0000,-1.0000,0.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 120.0000, -3.4941, 32.0000
MEAS/POINT, F(Y+2), 1
  GOTO/CART, 84.9962,-3.5013,56.4941
  GOTO/CART, 120.0000,-3.4941,56.4941
  PTMEAS/CART, 120.0000,0.0000,32.0000,0.0000,-1.0000,0.0000
ENDMES
F(Z+1) = FEAT/POINT,CART, 85,4,35, 0.000000,0,1
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 85.0000, 4.0000, 38.4941
RMEAS/POINT, F(Z+1), 1, FA(Y+1), YDIR
  PTMEAS/CART, 85.0000,4.0000,35.0000,-0.0000,-0.0000,1.0000
ENDMES
F(Z+2)=FEAT/POINT,CART,120.0000,4.0000,35.0000,-0.0000,-0.0000,1.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 120.0000, 4.0000, 38.4941
RMEAS/POINT, F(Z+2), 1, FA(Y+2), YDIR
  PTMEAS/CART, 120.0000,4.0000,35.0000,-0.0000,-0.0000,1.0000
ENDMES
F(Z2-1)=FEAT/POINT,CART,8.0000,22.0000,35.0000,-0.0000,-0.0000,1.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 8.0000, 22.0000, 38.4941
MEAS/POINT, F(Z2-1), 1
  GOTO/CART, 4.9949,21.9772,56.4941
  GOTO/CART, 8.0000,22.1000,56.4941
  PTMEAS/CART, 8.0000,22.0000,35.0000,-0.0000,-0.0000,1.0000
ENDMES
F(X-1) = FEAT/POINT,CART, 0,22.000000,28, -1,0,0
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, -3.4941, 22.0000, 28.0000
RMEAS/POINT, F(X-1), 1, FA(Z2-1), ZDIR
  GOTO/CART, 3.0264,22.2587,56.4941
  GOTO/CART, -3.4941,22.0000,56.4941
  PTMEAS/CART, 0.0000,22.0000,28.0000,-1.0000,0.0000,0.0000
ENDMES
F(Z2-2)=FEAT/POINT,CART,5.0000,84.0000,35.0000,-0.0000,-0.0000,1.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 5.0000, 84.0000, 38.4941
MEAS/POINT, F(Z2-2), 1
  GOTO/CART, -3.4946,21.9813,56.4941
  GOTO/CART, 5.0000,84.0000,56.4941
  PTMEAS/CART, 5.0000,84.0000,35.0000,-0.0000,-0.0000,1.0000
ENDMES
F(X-2) = FEAT/POINT,CART, 0,84.000000,28, -1,0,0
SNSET/APPRCH, 2.0000
SNSET/RETRCT, 2.0000
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 5.0000
SNSET/CLRSRF, FA(PLN2), 20.0000
GOTO/-14.2778, 83.5484, 47.8240
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, -3.4941, 84.0000, 28.0000
RMEAS/POINT, F(X-2), 1, FA(Z2-2), ZDIR
  PTMEAS/CART, 0.0000,84.0000,28.0000,-1.0000,0.0000,0.0000
ENDMES
F(CIR1)=FEAT/CIRCLE,INNER,CART,40.0000,55.0000,35.0000,-0.0000,0.0000,1.0000, 45.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, -3.5287, 83.9777, 56.4941
MEAS/CIRCLE, F(CIR1), 5
  GOTO/CART,   -3.5287, 83.9777, 56.4941
  GOTO/CART,   20.9941, 55.0000, 56.4941
  PTMEAS/CART, 17.5000, 55.0000, 32.0000,  1.0000, -0.0000,  0.0000
  GOTO/CART,   21.9243, 60.8731, 32.0000
  GOTO/CART,   24.6239, 66.1714, 32.0000
  GOTO/CART,   28.8286, 70.3761, 32.0000
  PTMEAS/CART, 33.0471, 76.3988, 32.0000,  0.3090, -0.9511,  0.0000
  GOTO/CART,   40.0000, 74.0059, 32.0000
  GOTO/CART,   45.8732, 73.0757, 32.0000
  GOTO/CART,   51.1714, 70.3761, 32.0000
  PTMEAS/CART, 58.2029, 68.2252, 32.0000, -0.8090, -0.5878,  0.0000
  GOTO/CART,   58.0757, 60.8732, 32.0000
  GOTO/CART,   59.0059, 55.0000, 32.0000
  GOTO/CART,   58.0757, 49.1268, 32.0000
  PTMEAS/CART, 58.2029, 41.7748, 32.0000, -0.8090,  0.5878, -0.0000
  GOTO/CART,   51.1714, 39.6239, 32.0000
  GOTO/CART,   45.8732, 36.9243, 32.0000
  GOTO/CART,   40.0000, 35.9941, 32.0000
  PTMEAS/CART, 33.0471, 33.6012, 32.0000,  0.3090,  0.9511, -0.0000
  GOTO/CART,   34.1268, 36.9245, 56.4941
ENDMES
F(K-1)=FEAT/CIRCLE,INNER,CART,72.0000,55.0000,35.0000,-0.0000,0.0000,1.0000, 10.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 70.4941, 55.0000, 56.4941
MEAS/CIRCLE, F(K-1), 5
  GOTO/CART,   70.4941, 55.0000, 56.4941
  PTMEAS/CART, 67.0000, 55.0000, 32.0000,  1.0000, -0.0000,  0.0000
  PTMEAS/CART, 70.4549, 59.7553, 32.0000,  0.3090, -0.9511,  0.0000
  PTMEAS/CART, 76.0451, 57.9389, 32.0000, -0.8090, -0.5878,  0.0000
  PTMEAS/CART, 76.0451, 52.0611, 32.0000, -0.8090,  0.5878, -0.0000
  PTMEAS/CART, 70.4549, 50.2447, 32.0000,  0.3090,  0.9511, -0.0000
  GOTO/CART,   71.5346, 53.5679, 56.4941
ENDMES
F(K-2)=FEAT/CIRCLE,INNER,CART,56.0000,82.7128,32.0000,0.0000,-0.0000,1.0000, 10.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 56.7082, 81.3838, 53.4941
RMEAS/CIRCLE, F(K-2), 5, FA(K-1), XDIR, FA(K-1), YDIR
  GOTO/CART,   56.7082, 81.3838, 53.4941
  PTMEAS/CART, 58.3513, 78.3002, 32.0000, -0.4703,  0.8825, -0.0000
  PTMEAS/CART, 60.9233, 83.5854, 32.0000, -0.9847, -0.1745,  0.0000
  PTMEAS/CART, 56.6915, 87.6648, 32.0000, -0.1383, -0.9904, -0.0000
  PTMEAS/CART, 51.5041, 84.9007, 32.0000,  0.8992, -0.4376,  0.0000
  PTMEAS/CART, 52.5299, 79.1130, 32.0000,  0.6940,  0.7200,  0.0000
ENDMES
F(K-3)=FEAT/CIRCLE,INNER,CART,24.0000,82.7128,32.0000,-0.0000,-0.0000,1.0000, 10.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 54.9263, 81.5346, 56.4941
RMEAS/CIRCLE, F(K-3), 5, FA(K-1), XDIR, FA(K-1), YDIR
  GOTO/CART,   54.9263, 81.5346, 56.4941
  GOTO/CART,   22.4941, 82.7128, 56.4941
  PTMEAS/CART, 19.0000, 82.7128, 32.0000,  1.0000,  0.0000, 0.0000
  PTMEAS/CART, 22.4549, 87.4681, 32.0000,  0.3090, -0.9511, 0.0000
  PTMEAS/CART, 28.0451, 85.6517, 32.0000, -0.8090, -0.5878, 0.0000
  PTMEAS/CART, 28.0451, 79.7739, 32.0000, -0.8090,  0.5878, 0.0000
  PTMEAS/CART, 22.4549, 77.9575, 32.0000,  0.3090,  0.9511, 0.0000
  GOTO/CART,   23.5346, 81.2807, 56.4941
ENDMES
F(PT7)=FEAT/POINT,CART,51.9083,52.6855,30.0000,0.0000,-0.0000,1.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 51.9083, 52.6855, 33.4941
MEAS/POINT, F(PT7), 1
  GOTO/CART, 51.9083,52.6855,56.4941
  PTMEAS/CART, 51.9083,52.6855,30.0000,0.0000,-0.0000,1.0000
ENDMES
F(K-4)=FEAT/CIRCLE,INNER,CART,40.0000,55.0000,24.0000,0.0000,-0.0000,1.0000, 20.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 46.3843, 53.7481, 45.4941
RMEAS/CIRCLE, F(K-4), 5, FA(PT7), ZDIR
  GOTO/CART,   46.3843, 53.7481, 45.4941
  PTMEAS/CART, 49.8131, 53.0758, 24.0000, -0.9813,  0.1924,  0.0000
  GOTO/CART,   46.4587, 55.7823, 24.0000
  GOTO/CART,   45.9009, 57.7398, 24.0000
  GOTO/CART,   44.7654, 59.4292, 24.0000
  PTMEAS/CART, 44.8624, 63.7382, 24.0000, -0.4862, -0.8738,  0.0000
  GOTO/CART,   41.2519, 61.3843, 24.0000
  GOTO/CART,   39.2177, 61.4587, 24.0000
  GOTO/CART,   37.2602, 60.9009, 24.0000
  PTMEAS/CART, 33.1920, 62.3247, 24.0000,  0.6808, -0.7325, -0.0000
  GOTO/CART,   34.3150, 58.1635, 24.0000
  GOTO/CART,   33.6157, 56.2519, 24.0000
  GOTO/CART,   33.5413, 54.2177, 24.0000
  PTMEAS/CART, 30.9300, 50.7887, 24.0000,  0.9070,  0.4211,  0.0000
  GOTO/CART,   35.2346, 50.5708, 24.0000
  GOTO/CART,   36.8365, 49.3150, 24.0000
  GOTO/CART,   38.7481, 48.6157, 24.0000
  PTMEAS/CART, 41.2024, 45.0726, 24.0000, -0.1202,  0.9927,  0.0000
ENDMES
F(K-5)=FEAT/CIRCLE,OUTER,CART,40.0000,55.0000,24.0000,0.0000,-0.0000,1.0000, 30.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 40.7788, 48.4959, 56.4941
RMEAS/CIRCLE, F(K-5), 5, FA(PT7), ZDIR
  GOTO/CART,   40.7788, 48.4959, 56.4941
  GOTO/CART,   21.5059, 55.0000, 56.4941
  PTMEAS/CART, 25.0000, 55.0000, 24.0000, -1.0000, -0.0000,  0.0000
  GOTO/CART,   22.4111, 60.7150, 24.0000
  GOTO/CART,   25.0380, 65.8706, 24.0000
  GOTO/CART,   29.1294, 69.9620, 24.0000
  PTMEAS/CART, 35.3647, 69.2658, 24.0000, -0.3090,  0.9511,  0.0000
  GOTO/CART,   40.0000, 73.4941, 24.0000
  GOTO/CART,   45.7150, 72.5889, 24.0000
  GOTO/CART,   50.8706, 69.9620, 24.0000
  PTMEAS/CART, 52.1353, 63.8168, 24.0000,  0.8090,  0.5878,  0.0000
  GOTO/CART,   57.5889, 60.7150, 24.0000
  GOTO/CART,   58.4941, 55.0000, 24.0000
  GOTO/CART,   57.5889, 49.2850, 24.0000
  PTMEAS/CART, 52.1353, 46.1832, 24.0000,  0.8090, -0.5878,  0.0000
  GOTO/CART,   50.8706, 40.0380, 24.0000
  GOTO/CART,   45.7150, 37.4111, 24.0000
  GOTO/CART,   40.0000, 36.5059, 24.0000
  PTMEAS/CART, 35.3647, 40.7342, 24.0000, -0.3090, -0.9511, -0.0000
  GOTO/CART,   34.2851, 37.4109, 56.4941
ENDMES
F(G-1)=FEAT/POINT,CART,84.6404,0.0000,29.7928,0.0000,-1.0000,0.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 84.6404, -3.4941, 29.7928
MEAS/POINT, F(G-1), 1
  GOTO/CART, 84.6404,-3.4941,56.4941
  PTMEAS/CART, 84.6404,0.0000,29.7928,0.0000,-1.0000,0.0000
  GOTO/CART, 84.6404,-3.4941,56.4941
ENDMES
F(G-2)=FEAT/POINT,CART,83.8597,10.8639,35.0000,0.0000,-0.0000,1.0000
SNSET/APPRCH, 2.0000
SNSET/RETRCT, 2.0000
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 5.0000
SNSET/CLRSRF, FA(PLN2), 20.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 83.8597, 10.8639, 38.4941
RMEAS/POINT, F(G-2), 1, FA(G-1), YDIR
  PTMEAS/CART, 83.8597,10.8639,35.0000,0.0000,-0.0000,1.0000
ENDMES
F(G-3)=FEAT/POINT,CART,125.0000,90.9940,28.3365,1.0000,0.0000,-0.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 128.4941, 90.9940, 28.3365
MEAS/POINT, F(G-3), 1
  GOTO/CART, 128.4941,90.9940,56.4941
  PTMEAS/CART, 125.0000,90.9940,28.3365,1.0000,0.0000,-0.0000
  GOTO/CART, 128.4941,90.9940,56.4941
ENDMES
F(G-4)=FEAT/POINT,CART,107.6230,90.5146,35.0000,0.0000,-0.0000,1.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 107.6230, 90.5146, 38.4941
RMEAS/POINT, F(G-4), 1, FA(G-3), XDIR
  PTMEAS/CART, 107.6230,90.5146,35.0000,0.0000,-0.0000,1.0000
ENDMES
F(K-6)=FEAT/CIRCLE,INNER,CART,56.0000,27.2872,35.0000,0.0000,-0.0000,1.0000, 10.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 110.6228, 90.4967, 56.4941
RMEAS/CIRCLE, F(K-6), 5, FA(CIR1), XDIR, FA(CIR1), YDIR, FA(PLN2), ZDIR
  GOTO/CART,   110.6228, 90.4967, 56.4941
  GOTO/CART,    54.4941, 27.2872, 56.4941
  PTMEAS/CART,  51.0000, 27.2872, 32.0000,  1.0000,  0.0000, 0.0000
  PTMEAS/CART,  54.4549, 32.0425, 32.0000,  0.3090, -0.9511, 0.0000
  PTMEAS/CART,  60.0451, 30.2261, 32.0000, -0.8090, -0.5878, 0.0000
  PTMEAS/CART,  60.0451, 24.3483, 32.0000, -0.8090,  0.5878, 0.0000
  PTMEAS/CART,  54.4549, 22.5319, 32.0000,  0.3090,  0.9511, 0.0000
  GOTO/CART,    55.5346, 25.8551, 56.4941
ENDMES
F(K-7)=FEAT/CIRCLE,INNER,CART,24.0000,27.2872,32.0000,-0.0000,0.0000,1.0000, 10.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 25.5043, 27.2178, 53.4941
RMEAS/CIRCLE, F(K-7), 5, FA(CIR1), XDIR, FA(CIR1), YDIR, FA(PLN2), ZDIR
  GOTO/CART,   25.5043, 27.2178, 53.4941
  PTMEAS/CART, 28.9947, 27.0568, 32.0000, -0.9989,  0.0461, -0.0000
  PTMEAS/CART, 25.7626, 31.9662, 32.0000, -0.3525, -0.9358,  0.0000
  PTMEAS/CART, 20.0946, 30.4094, 32.0000,  0.7811, -0.6244,  0.0000
  PTMEAS/CART, 19.8238, 24.5378, 32.0000,  0.8352,  0.5499,  0.0000
  PTMEAS/CART, 25.3243, 22.4658, 32.0000, -0.2649,  0.9643, -0.0000
ENDMES
  • 1.
  • 2.
  • 3.
  • 4.
  • 5.
  • 6.
  • 7.
  • 8.
  • 9.
  • 10.
  • 11.
  • 12.
  • 13.
  • 14.
  • 15.
  • 16.
  • 17.
  • 18.
  • 19.
  • 20.
  • 21.
  • 22.
  • 23.
  • 24.
  • 25.
  • 26.
  • 27.
  • 28.
  • 29.
  • 30.
  • 31.
  • 32.
  • 33.
  • 34.
  • 35.
  • 36.
  • 37.
  • 38.
  • 39.
  • 40.
  • 41.
  • 42.
  • 43.
  • 44.
  • 45.
  • 46.
  • 47.
  • 48.
  • 49.
  • 50.
  • 51.
  • 52.
  • 53.
  • 54.
  • 55.
  • 56.
  • 57.
  • 58.
  • 59.
  • 60.
  • 61.
  • 62.
  • 63.
  • 64.
  • 65.
  • 66.
  • 67.
  • 68.
  • 69.
  • 70.
  • 71.
  • 72.
  • 73.
  • 74.
  • 75.
  • 76.
  • 77.
  • 78.
  • 79.
  • 80.
  • 81.
  • 82.
  • 83.
  • 84.
  • 85.
  • 86.
  • 87.
  • 88.
  • 89.
  • 90.
  • 91.
  • 92.
  • 93.
  • 94.
  • 95.
  • 96.
  • 97.
  • 98.
  • 99.
  • 100.
  • 101.
  • 102.
  • 103.
  • 104.
  • 105.
  • 106.
  • 107.
  • 108.
  • 109.
  • 110.
  • 111.
  • 112.
  • 113.
  • 114.
  • 115.
  • 116.
  • 117.
  • 118.
  • 119.
  • 120.
  • 121.
  • 122.
  • 123.
  • 124.
  • 125.
  • 126.
  • 127.
  • 128.
  • 129.
  • 130.
  • 131.
  • 132.
  • 133.
  • 134.
  • 135.
  • 136.
  • 137.
  • 138.
  • 139.
  • 140.
  • 141.
  • 142.
  • 143.
  • 144.
  • 145.
  • 146.
  • 147.
  • 148.
  • 149.
  • 150.
  • 151.
  • 152.
  • 153.
  • 154.
  • 155.
  • 156.
  • 157.
  • 158.
  • 159.
  • 160.
  • 161.
  • 162.
  • 163.
  • 164.
  • 165.
  • 166.
  • 167.
  • 168.
  • 169.
  • 170.
  • 171.
  • 172.
  • 173.
  • 174.
  • 175.
  • 176.
  • 177.
  • 178.
  • 179.
  • 180.
  • 181.
  • 182.
  • 183.
  • 184.
  • 185.
  • 186.
  • 187.
  • 188.
  • 189.
  • 190.
  • 191.
  • 192.
  • 193.
  • 194.
  • 195.
  • 196.
  • 197.
  • 198.
  • 199.
  • 200.
  • 201.
  • 202.
  • 203.
  • 204.
  • 205.
  • 206.
  • 207.
  • 208.
  • 209.
  • 210.
  • 211.
  • 212.
  • 213.
  • 214.
  • 215.
  • 216.
  • 217.
  • 218.
  • 219.
  • 220.
  • 221.
  • 222.
  • 223.
  • 224.
  • 225.
  • 226.
  • 227.
  • 228.
  • 229.
  • 230.
  • 231.
  • 232.
  • 233.
  • 234.
  • 235.
  • 236.
  • 237.
  • 238.
  • 239.
  • 240.
  • 241.
  • 242.
  • 243.
  • 244.
  • 245.
  • 246.
  • 247.
  • 248.
  • 249.
  • 250.
  • 251.
  • 252.
  • 253.
  • 254.
  • 255.
  • 256.
  • 257.
  • 258.
  • 259.
  • 260.
  • 261.
  • 262.
  • 263.
  • 264.
  • 265.
  • 266.
  • 267.
  • 268.
  • 269.
  • 270.
  • 271.
  • 272.
  • 273.
  • 274.
  • 275.
  • 276.
  • 277.
  • 278.
  • 279.
  • 280.
  • 281.
  • 282.
  • 283.
  • 284.
  • 285.
  • 286.
  • 287.
  • 288.
  • 289.
  • 290.
  • 291.
  • 292.
  • 293.
  • 294.
  • 295.
  • 296.
  • 297.
  • 298.
  • 299.
  • 300.
  • 301.
  • 302.
  • 303.
  • 304.
  • 305.
  • 306.
  • 307.
  • 308.
  • 309.
  • 310.
  • 311.
  • 312.
  • 313.
  • 314.
  • 315.
  • 316.
  • 317.
  • 318.
  • 319.
  • 320.
  • 321.
  • 322.
  • 323.
  • 324.
  • 325.
  • 326.
  • 327.
  • 328.
  • 329.
  • 330.
  • 331.
  • 332.
  • 333.
  • 334.
  • 335.
  • 336.
  • 337.
  • 338.
  • 339.
  • 340.
  • 341.
  • 342.
  • 343.
  • 344.
  • 345.
  • 346.
  • 347.
  • 348.
  • 349.
  • 350.
  • 351.
  • 352.
  • 353.
  • 354.
  • 355.
  • 356.
  • 357.
  • 358.
  • 359.
  • 360.
  • 361.
  • 362.
  • 363.
  • 364.
  • 365.
  • 366.
  • 367.
  • 368.
  • 369.
  • 370.
  • 371.
  • 372.
  • 373.
  • 374.
  • 375.
  • 376.
  • 377.
  • 378.
  • 379.
  • 380.
  • 381.
  • 382.
  • 383.
  • 384.
  • 385.
  • 386.
  • 387.
  • 388.
  • 389.

RationalDMIS2024相对测量（参考测量）_EQ_09