INT0及INT1中断计数

/*	名称：INT0及INT1中断计数	
	说明：每次按下第1个计数键时，第1组计数值累加并显示在右边3只数码管上， 每次按下第2个计数键时，第2组计数值累加并显示在左边3只数码管上，后两个按键分别清零。
*/
#include<reg51.h>
#define uchar unsigned char
#define uint unsigned int
sbit K3=P3^4;	//2个清零键
sbit K4=P3^5;
//数码管段码与位码
uchar code DSY_CODE[]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90,0xff};
uchar code DSY_Scan_Bits[]={0x20,0x10,0x08,0x04,0x02,0x01};
//2组计数的显示缓冲，前3位一组，后3位一组
uchar data Buffer_Counts[]={0,0,0,0,0,0};
uint Count_A,Count_B=0;
//延时
void DelayMS(uint x)
{
	uchar t;
	while(x--) for(t=0;t<120;t++);
}
//数据显示
void Show_Counts()
{
	uchar i;
	Buffer_Counts[2]=Count_A/100;
	Buffer_Counts[1]=Count_A%100/10;
	Buffer_Counts[0]=Count_A%10;
	if(	Buffer_Counts[2]==0)
	{
		Buffer_Counts[2]=0x0a;
		if(	Buffer_Counts[1]==0)
			Buffer_Counts[1]=0x0a;
	}
	Buffer_Counts[5]=Count_B/100;
	Buffer_Counts[4]=Count_B%100/10;
	Buffer_Counts[3]=Count_B%10;
	if(	Buffer_Counts[5]==0)
	{
		Buffer_Counts[5]=0x0a;
		if(	Buffer_Counts[4]==0)
			Buffer_Counts[4]=0x0a;
	}
	for(i=0;i<6;i++)
	{
		P2=DSY_Scan_Bits[i];
		P1=DSY_CODE[Buffer_Counts[i]];
		DelayMS(1);
	}
}
//主程序
void main()
{
	IE=0x85;
	PX0=1;	//中断优先
	IT0=1;
	IT1=1;
	while(1)
	{
		if(K3==0) Count_A=0;
		if(K4==0) Count_B=0;
		Show_Counts();
	}
}
//INT0中断函数
void EX_INT0() interrupt 0
{
	Count_A++; 	
}
//INT1中断函数
void EX_INT1() interrupt 2
{
	Count_B++; 	
}