Linux7.x通过命令配置网卡聚合双网卡绑定（Bond/team0）

最新推荐文章于 2024-07-16 15:06:37 发布

海量数据工程师

最新推荐文章于 2024-07-16 15:06:37 发布

阅读量916

点赞数

文章标签： linux

本文链接：https://blog.csdn.net/weixin_41752389/article/details/120777156

版权

本文介绍了如何在Linux7.x上通过命令行配置网卡聚合，将eno1和enp130s0f0两个网卡绑定成team0，实现网卡负载均衡和冗余。步骤包括创建team0连接、添加slave网卡、配置IP地址及激活连接。

摘要由CSDN通过智能技术生成

1、用ifconfig命令可以看到主机现在有4个物理网口eno1、eno2、enp130s0f0、enp130s0f1

ifconfig -a

eno1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
ether 6c:92:bf:4c:70:b8 txqueuelen 1000 (Ethernet)
RX packets 1047 bytes 84337 (82.3 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 473 bytes 52426 (51.1 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device memory 0xc7a20000-c7a3ffff

eno2: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 6c:92:bf:4c:70:b9 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device memory 0xc7a00000-c7a1ffff

enp130s0f0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
ether 6c:92:bf:4c:70:b8 txqueuelen 1000 (Ethernet)
RX packets 1192 bytes 282779 (