ConcurrentSkipListMap

使用的是多级索引进行查找

put的时候会随机建立多级索引

/*
* This class implements a tree-like two-dimensionally linked skip
* list in which the index levels are represented in separate
* nodes from the base nodes holding data. There are two reasons
* for taking this approach instead of the usual array-based
* structure: 1) Array based implementations seem to encounter
* more complexity and overhead 2) We can use cheaper algorithms
* for the heavily-traversed index lists than can be used for the
* base lists. Here’s a picture of some of the basics for a
* possible list with 2 levels of index:
*
* Head nodes Index nodes
* ±+ right ±+ ±+
* |2|---------------->| |--------------------->| |->null
* ±+ ±+ ±+
* | down | |
* v v v
* ±+ ±+ ±+ ±+ ±+ ±+
* |1|----------->| |->| |------>| |----------->| |------>| |->null
* ±+ ±+ ±+ ±+ ±+ ±+
* v | | | | |
* Nodes next v v v v v
* ±+ ±+ ±+ ±+ ±+ ±+ ±+ ±+ ±+ ±+ ±+ ±+
* | |->|A|->|B|->|C|->|D|->|E|->|F|->|G|->|H|->|I|->|J|->|K|->null
* ±+ ±+ ±+ ±+ ±+ ±+ ±+ ±+ ±+ ±+ ±+ ±+
*
* The base lists use a variant of the HM linked ordered set
* algorithm. See Tim Harris, “A pragmatic implementation of
* non-blocking linked lists”
* http://www.cl.cam.ac.uk/~tlh20/publications.html and Maged
* Michael “High Performance Dynamic Lock-Free Hash Tables and
* List-Based Sets”
* http://www.research.ibm.com/people/m/michael/pubs.htm. The
* basic idea in these lists is to mark the “next” pointers of
* deleted nodes when deleting to avoid conflicts with concurrent
* insertions, and when traversing to keep track of triples
* (predecessor, node, successor) in order to detect when and how
* to unlink these deleted nodes.
*
* Rather than using mark-bits to mark list deletions (which can
* be slow and space-intensive using AtomicMarkedReference), nodes
* use direct CAS’able next pointers. On deletion, instead of
* marking a pointer, they splice in another node that can be
* thought of as standing for a marked pointer (indicating this by
* using otherwise impossible field values). Using plain nodes
* acts roughly like “boxed” implementations of marked pointers,
* but uses new nodes only when nodes are deleted, not for every
* link. This requires less space and supports faster
* traversal. Even if marked references were better supported by
* JVMs, traversal using this technique might still be faster
* because any search need only read ahead one more node than
* otherwise required (to check for trailing marker) rather than
* unmasking mark bits or whatever on each read.
*
* This approach maintains the essential property needed in the HM
* algorithm of changing the next-pointer of a deleted node so
* that any other CAS of it will fail, but implements the idea by
* changing the pointer to point to a different node, not by
* marking it. While it would be possible to further squeeze
* space by defining marker nodes not to have key/value fields, it
* isn’t worth the extra type-testing overhead. The deletion
* markers are rarely encountered during traversal and are
* normally quickly garbage collected. (Note that this technique
* would not work well in systems without garbage collection.)
*
* In addition to using deletion markers, the lists also use
* nullness of value fields to indicate deletion, in a style
* similar to typical lazy-deletion schemes. If a node’s value is
* null, then it is considered logically deleted and ignored even
* though it is still reachable. This maintains proper control of
* concurrent replace vs delete operations – an attempted replace
* must fail if a delete beat it by nulling field, and a delete
* must return the last non-null value held in the field. (Note:
* Null, rather than some special marker, is used for value fields
* here because it just so happens to mesh with the Map API
* requirement that method get returns null if there is no
* mapping, which allows nodes to remain concurrently readable
* even when deleted. Using any other marker value here would be
* messy at best.)
*
* Here’s the sequence of events for a deletion of node n with
* predecessor b and successor f, initially:
*
* ±-----+ ±-----+ ±-----+
* … | b |------>| n |----->| f | …
* ±-----+ ±-----+ ±-----+
*
* 1. CAS n’s value field from non-null to null.
* From this point on, no public operations encountering
* the node consider this mapping to exist. However, other
* ongoing insertions and deletions might still modify
* n’s next pointer.
*
* 2. CAS n’s next pointer to point to a new marker node.
* From this point on, no other nodes can be appended to n.
* which avoids deletion errors in CAS-based linked lists.
*
* ±-----+ ±-----+ ±-----+ ±-----+
* … | b |------>| n |----->|marker|------>| f | …
* ±-----+ ±-----+ ±-----+ ±-----+
*
* 3. CAS b’s next pointer over both n and its marker.
* From this point on, no new traversals will encounter n,
* and it can eventually be GCed.
* ±-----+ ±-----+
* … | b |----------------------------------->| f | …
* ±-----+ ±-----+
*
* A failure at step 1 leads to simple retry due to a lost race
* with another operation. Steps 2-3 can fail because some other
* thread noticed during a traversal a node with null value and
* helped out by marking and/or unlinking. This helping-out
* ensures that no thread can become stuck waiting for progress of
* the deleting thread. The use of marker nodes slightly
* complicates helping-out code because traversals must track
* consistent reads of up to four nodes (b, n, marker, f), not
* just (b, n, f), although the next field of a marker is
* immutable, and once a next field is CAS’ed to point to a
* marker, it never again changes, so this requires less care.
*
* Skip lists add indexing to this scheme, so that the base-level
* traversals start close to the locations being found, inserted
* or deleted – usually base level traversals only traverse a few
* nodes. This doesn’t change the basic algorithm except for the
* need to make sure base traversals start at predecessors (here,
* b) that are not (structurally) deleted, otherwise retrying
* after processing the deletion.
*
* Index levels are maintained as lists with volatile next fields,
* using CAS to link and unlink. Races are allowed in index-list
* operations that can (rarely) fail to link in a new index node
* or delete one. (We can’t do this of course for data nodes.)
* However, even when this happens, the index lists remain sorted,
* so correctly serve as indices. This can impact performance,
* but since skip lists are probabilistic anyway, the net result
* is that under contention, the effective “p” value may be lower
* than its nominal value. And race windows are kept small enough
* that in practice these failures are rare, even under a lot of
* contention.
*
* The fact that retries (for both base and index lists) are
* relatively cheap due to indexing allows some minor
* simplifications of retry logic. Traversal restarts are
* performed after most “helping-out” CASes. This isn’t always
* strictly necessary, but the implicit backoffs tend to help
* reduce other downstream failed CAS’s enough to outweigh restart
* cost. This worsens the worst case, but seems to improve even
* highly contended cases.
*
* Unlike most skip-list implementations, index insertion and
* deletion here require a separate traversal pass occurring after
* the base-level action, to add or remove index nodes. This adds
* to single-threaded overhead, but improves contended
* multithreaded performance by narrowing interference windows,
* and allows deletion to ensure that all index nodes will be made
* unreachable upon return from a public remove operation, thus
* avoiding unwanted garbage retention. This is more important
* here than in some other data structures because we cannot null
* out node fields referencing user keys since they might still be
* read by other ongoing traversals.
*
* Indexing uses skip list parameters that maintain good search
* performance while using sparser-than-usual indices: The
* hardwired parameters k=1, p=0.5 (see method doPut) mean
* that about one-quarter of the nodes have indices. Of those that
* do, half have one level, a quarter have two, and so on (see
* Pugh’s Skip List Cookbook, sec 3.4). The expected total space
* requirement for a map is slightly less than for the current
* implementation of java.util.TreeMap.
*
* Changing the level of the index (i.e, the height of the
* tree-like structure) also uses CAS. The head index has initial
* level/height of one. Creation of an index with height greater
* than the current level adds a level to the head index by
* CAS’ing on a new top-most head. To maintain good performance
* after a lot of removals, deletion methods heuristically try to
* reduce the height if the topmost levels appear to be empty.
* This may encounter races in which it possible (but rare) to
* reduce and “lose” a level just as it is about to contain an
* index (that will then never be encountered). This does no
* structural harm, and in practice appears to be a better option
* than allowing unrestrained growth of levels.
*
* The code for all this is more verbose than you’d like. Most
* operations entail locating an element (or position to insert an
* element). The code to do this can’t be nicely factored out
* because subsequent uses require a snapshot of predecessor
* and/or successor and/or value fields which can’t be returned
* all at once, at least not without creating yet another object
* to hold them – creating such little objects is an especially
* bad idea for basic internal search operations because it adds
* to GC overhead. (This is one of the few times I’ve wished Java
* had macros.) Instead, some traversal code is interleaved within
* insertion and removal operations. The control logic to handle
* all the retry conditions is sometimes twisty. Most search is
* broken into 2 parts. findPredecessor() searches index nodes
* only, returning a base-level predecessor of the key. findNode()
* finishes out the base-level search. Even with this factoring,
* there is a fair amount of near-duplication of code to handle
* variants.
*
* To produce random values without interference across threads,
* we use within-JDK thread local random support (via the
* “secondary seed”, to avoid interference with user-level
* ThreadLocalRandom.)
*
* A previous version of this class wrapped non-comparable keys
* with their comparators to emulate Comparables when using
* comparators vs Comparables. However, JVMs now appear to better
* handle infusing comparator-vs-comparable choice into search
* loops. Static method cpr(comparator, x, y) is used for all
* comparisons, which works well as long as the comparator
* argument is set up outside of loops (thus sometimes passed as
* an argument to internal methods) to avoid field re-reads.
*
* For explanation of algorithms sharing at least a couple of
* features with this one, see Mikhail Fomitchev’s thesis
* (http://www.cs.yorku.ca/~mikhail/), Keir Fraser’s thesis
* (http://www.cl.cam.ac.uk/users/kaf24/), and Hakan Sundell’s
* thesis (http://www.cs.chalmers.se/~phs/).
*
* Given the use of tree-like index nodes, you might wonder why
* this doesn’t use some kind of search tree instead, which would
* support somewhat faster search operations. The reason is that
* there are no known efficient lock-free insertion and deletion
* algorithms for search trees. The immutability of the “down”
* links of index nodes (as opposed to mutable “left” fields in
* true trees) makes this tractable using only CAS operations.
*
* Notation guide for local variables
* Node: b, n, f for predecessor, node, successor
* Index: q, r, d for index node, right, down.
* t for another index node
* Head: h
* Levels: j
* Keys: k, key
* Values: v, value
* Comparisons: c
*/