usb linux下110错误,qq2440启动linux后插入u盘出现usb 1-1: device descriptor read/64, error -110,usb 1-1: device n...

上位机：ubuntu14.04 64bit

下位机:qq2440

交叉编译器:arm-linux-gcc 3.4.1

下位机使用的linux内核版本:kernel2.6.13

1.插入u盘时错误信息如下:

[[email protected] /home]# usb 1-1: new full speed USB device using s3c2410-ohci and address 6

usb 1-1: device descriptor read/64, error -110

usb 1-1: device descriptor read/64, error -110

usb 1-1: new full speed USB device using s3c2410-ohci and address 7

usb 1-1: device descriptor read/64, error -110

usb 1-1: device descriptor read/64, error -110

usb 1-1: new full speed USB device using s3c2410-ohci and address 8

usb 1-1: device not accepting address 8, error -110

usb 1-1: new full speed USB device using s3c2410-ohci and address 9

usb 1-1: device not accepting address 9, error -110

2.解决方案如下:

2.1修改drivers/usb/host/ohci-s3c2410.c文件，添加以下内容：

a.先添加头文件#include

b.在s3c2410_start_hc函数中添加以下内容：

unsigned long upllvalue = (0x78 << 12) | (0x02 << 4) | (0x03);

while (upllvalue != __raw_readl(S3C2410_UPLLCON)) {

__raw_writel(upllvalue, S3C2410_UPLLCON);

mdelay(1);

}

添加后的s3c2410_start_hc函数如下:

static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd)

{

struct s3c2410_hcd_info *info = dev->dev.platform_data;

dev_dbg(&dev->dev, "s3c2410_start_hc:\n");

clk_enable(clk);

if (info != NULL) {

info->hcd       = hcd;

info->report_oc = s3c2410_hcd_oc;

if (info->enable_oc != NULL) {

(info->enable_oc)(info, 1);

}

}

unsigned long upllvalue = (0x78 << 12) | (0x02 << 4) | (0x03);

while (upllvalue != __raw_readl(S3C2410_UPLLCON)) {

__raw_writel(upllvalue, S3C2410_UPLLCON);

mdelay(1);

}

}

2.2总结：以上修改的函数功能是启动主机控制器,因为usb时钟设置有问题，因而在开启主机控制器时修改时钟,修改后的S3C2410_UPLLCON的值为0xF4100008;

3.注意：本版本内核没有头文件regs-clock.h，因而我从其他内核中复制过来的，命令如下:

[email protected]:~/Downloads/qq2440/linux/kernel-2.6.13$ cp /tftpboot/kernel-2.6.35.7/arch/arm/mach-s3c2410/include/mach/regs-clock.h ./