u盘安卓linux,Android/Linux USB OTG U盘的挂载问题

问题：通过otg可以识别到USB鼠标，但插上U盘却不识别。

问题分析：怀疑是USB otg的menuconfig没有配置。

问题处理：

1、make menuconfig进入config的配置

2、配置路径如下：

Device Drivers ---> MMC/SD/SDIO card support ---->

然后选择: USB SD Host Controller (USHC) support ,

VUB300 USB to SDIO/SD/MMC Host Controller support

正确挂载u盘log如下：

[ 273.447143]{0} DEBUG:COMIP_HSIC_TIMER_SCHEDULE:: Modifying timer hc timer to expire in +10000 msec

[ 273.457336]{0} usb 2-1.3: device v090c p1000 is not supported

[ 273.463684]{0} usb 2-1.3: New USB device found, idVendor=090c, idProduct=1000

[ 273.472839]{3} usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 273.472869]{3} usb 2-1.3: Product: USB DISK

[ 273.472869]{3} usb 2-1.3: Manufacturer: SMI Corporation

[ 273.481231]{0} DEBUG:COMIP_HSIC_TIMER_SCHEDULE:: Modify