鸿蒙IPC摄像机,【HarmonyOS HiSpark IPC DIY Camera】hi3518-wifi配置与使用

【编译生成wifi可执行文件】 请参考以下示例代码编译可执行程序wpa_supplicant：

#include

#include

#include

#include

pthread_t g_wpaThread;

char* g_wpaArg[20] = {0};

int g_wpaArgc = 0;

static void* ThreadMain()

{

printf("[WpaSample]init wpa_supplicant.\n");

void *handleLibWpa = dlopen("/usr/lib/libwpa.so", RTLD_NOW | RTLD_LOCAL);

if (handleLibWpa == NULL) {

printf("[WpaSample]dlopen libwpa failed.\n");

return NULL;

}

int (*func)(int, char **) = NULL;

func =  dlsym(handleLibWpa, "wpa_main");

if (func == NULL) {

dlclose(handleLibWpa);

printf("[WpaSample]dlsym wpa_main failed.\n");

return NULL;

}

int ret = func(g_wpaArgc, g_wpaArg);

printf("[WpaSample]run wpa_main failed, ret:%d.\n", ret);

for (int i = 0; i < g_wpaArgc; i++) {

printf("[WpaSample]arg %d:%s.\n", i, g_wpaArg[i]);

}

if (dlclose(handleLibWpa) != 0) {

printf("[WpaSample]dlclose libwpa failed.\n");

return NULL;

}

return NULL;

}

int main(int argc, char *argv[])

{

g_wpaArgc = argc;

for (int i = 0; i < g_wpaArgc; i++) {

g_wpaArg[i] = argv[i];

}

int ret = pthread_create(&g_wpaThread, NULL, ThreadMain, NULL);

if (ret != 0) {

printf("[WpaSample]create thread failed error:%s.\n", strerror(ret));

return 1;

}

pthread_join(g_wpaThread, NULL);

return 0;

}

【修改station模式的配置】 将以下配置写到配置文件wpa_supplicant.conf

country=GB

ctrl_interface=udp

network={

#要连接的SSID

ssid="example"

#如果不需要加密就写key_mgmt=NONE

#key_mgmt=NONE

#如果需要加密就写这行密码

psk="12345678"

}

【修改ap模式的配置】 将以下配置写到配置文件hostapd.conf

interface=wlan0

driver=hdf wifi

ctrl_interface=udp

ssid=testap

hw_mode=g

channel=1

ignore_broadcast_ssid=0

#下面是wpa2-psk类型加密的配置

#如果不需要加密可以删除

auth_algs=1

wpa=2

wpa_passphrase=12345678

rsn_pairwise=CCMP

【使用方法】

将wpa_supplicant、wpa_supplicant.conf、hostapd.conf拷贝到单板中(sdcard目录)

启动sta的命令：

./sdcard/wpa_supplicant -i wlan0 -c /sdcard/wpa_supplicant.conf

启动ap的命令：

./sdcard/hostapd -i wlan0 /sdcard/hostapd.conf

【WIFI设备检测】 进入OHOS界面后，输入ifconfig，检查wlan0网口是否加载正常，加载成功标识如下：OHOS # ifconfig

wlan0   ip:0.0.0.0 netmask:0.0.0.0 gateway:0.0.0.0

HWaddr 0a:11:31:aa:7e:1a MTU:1500 Stop Link UP

lo      ip:127.0.0.1 netmask:255.0.0.0 gateway:127.0.0.1

ip6: ::1/64

HWaddr 00 MTU:16436 Running Link UP