linux 移动硬盘 lba,把移动硬盘借同学后变这样了

该楼层疑似违规已被系统折叠 隐藏此楼查看此楼

/dev/sdb:

ATA device, with non-removable media

Model Number: ST500LM012 HN-M500MBB

Serial Number: S4R0822Z159734

Firmware Revision: 2AC101C5

Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6

Standards:

Used: unknown (minor revision code 0x0028)

Supported: 8 7 6 5

Likely used: 8

Configuration:

Logical max current

cylinders 16383 16383

heads 16 16

sectors/track 63 63

--

CHS current addressable sectors: 16514064

LBA user addressable sectors: 268435455

LBA48 user addressable sectors: 976773168

Logical Sector size: 512 bytes

Physical Sector size: 512 bytes

device size with M = 1024*1024: 476940 MBytes

device size with M = 1000*1000: 500107 MBytes (500 GB)

cache/buffer size = 8192 KBytes

Form Factor: 2.5 inch

Capabilities:

LBA, IORDY(can be disabled)

Queue depth: 32

Standby timer values: spec*d by Standard, no device specific minimum

R/W multiple sector transfer: Max = 16 Current = ?

Advanced power management level: disabled

Recommended acoustic management value: 254, current value: 0

DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6

Cycle time: min=120ns recommended=120ns

PIO: pio0 pio1 pio2 pio3 pio4

Cycle time: no flow control=120ns IORDY flow control=120ns

Commands/features:

Enabled Supported:

SMART feature set

Security Mode feature set

* Power Management feature set

* Write cache

* Look-ahead

* Host Protected Area feature set

* WRITE_BUFFER command

* READ_BUFFER command

* NOP cmd

* DOWNLOAD_MICROCODE

Advanced Power Management feature set

Power-Up In Standby feature set

* SET_FEATURES required to spinup after power up

SET_MAX security extension

Automatic Acoustic Management feature set

* 48-bit Address feature set

* Device Configuration Overlay feature set

* Mandatory FLUSH_CACHE

* FLUSH_CACHE_EXT

* SMART error logging

* SMART self-test

* General Purpose Logging feature set

* 64-bit World wide name

* IDLE_IMMEDIATE with UNLOAD

* WRITE_UNCORRECTABLE_EXT command

* {READ,WRITE}_DMA_EXT_GPL commands

* Segmented DOWNLOAD_MICROCODE

* Gen1 signaling speed (1.5Gb/s)

* Gen2 signaling speed (3.0Gb/s)

* Native Command Queueing (NCQ)

* Host-initiated interface power management

* Phy event counters

* Idle-Unload when NCQ is active

* NCQ priority information

DMA Setup Auto-Activate optimization

Device-initiated interface power management

* Software settings preservation

* SMART Command Transport (SCT) feature set

* SCT Read/Write Long (AC1), obsolete

* SCT Write Same (AC2)

* SCT Error Recovery Control (AC3)

* SCT Features Control (AC4)

* SCT Data Tables (AC5)

Security:

Master password revision code = 65534

supported

not enabled

not locked

not frozen

not expired: security count

supported: enhanced erase

134min for SECURITY ERASE UNIT. 134min for ENHANCED SECURITY ERASE UNIT.

Logical Unit WWN Device Identifier: 50000f00152a3497

NAA : 5

IEEE OUI : 0000f0

Unique ID : 0152a3497

Checksum: correct