zookeeper以及kafka单机安装小结

在一台机器上单机安装kafka记录

一、环境配置

kafka 版本 2.11
Kafka官网下载地址
JDK版本：1.8
Zookeeper

二、操作过程

1、下载zookeeper和Kafka并解压

2、配置zookeeper

zookeeper的安装，这里演示的是单机版的。
安装参考：
https://blog.csdn.net/qq_27739989/article/details/78078431
https://blog.csdn.net/dongdong9223/article/details/81349965

3、Kafka解压后目录介绍

/bin 操作kafka的可执行脚本，还包含windows下脚本
/config 配置文件所在目录
/libs 依赖库目录
/logs 日志数据目录，目录kafka把server端日志分为5种类型，分为:server,request,state，log-cleaner，controller

4.配置kafka

安装很简单，直接将下载的kafka软件的包解压即可，然后配置一下config下面的server.properties文件，主要是修改log路径以及zookeeper的监听地址。然后运行bin下面的kafka-server-start.sh即可。

配置信息：

[root@xiehao1 config]# vi server.properties 
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# see kafka.server.KafkaConfig for additional details and defaults

############################# Server Basics #############################

# The id of the broker. This must be set to a unique integer for each broker.
broker.id=0

############################# Socket Server Settings #############################

# The address the socket server listens on. It will get the value returned from
# java.net.InetAddress.getCanonicalHostName() if not configured.
#   FORMAT:
#     listeners = listener_name://host_name:port
#   EXAMPLE:
#     listeners = PLAINTEXT://your.host.name:9092
#listeners=PLAINTEXT://:9092
port=9092
host.name=127.0.0.1
#依据具体的服务器，配置相应的服务器的IP地址即可。
# Hostname and port the broker will advertise to producers and consumers. If not set,
# it uses the value for "listeners" if configured.  Otherwise, it will use the value
# returned from java.net.InetAddress.getCanonicalHostName().
#advertised.listeners=PLAINTEXT://your.host.name:9092

# Maps listener names to security protocols, the default is for them to be the same. See the config documentation for more details
#listener.security.protocol.map=PLAINTEXT:PLAINTEXT,SSL:SSL,SASL_PLAINTEXT:SASL_PLAINTEXT,SASL_SSL:SASL_SSL

# The number of threads that the server uses for receiving requests from the network and sending responses to the network
num.network.threads=3

# The number of threads that the server uses for processing requests, which may include disk I/O
num.io.threads=8

# The send buffer (SO_SNDBUF) used by the socket server
socket.send.buffer.bytes=102400

# The receive buffer (SO_RCVBUF) used by the socket server
socket.receive.buffer.bytes=102400

# The maximum size of a request that the socket server will accept (protection against OOM)
socket.request.max.bytes=104857600


############################# Log Basics #############################

# A comma separated list of directories under which to store log files
log.dirs=/tmp/kafka-logs

# The default number of log partitions per topic. More partitions allow greater
# parallelism for consumption, but this will also result in more files across
# the brokers.
num.partitions=1

# The number of threads per data directory to be used for log recovery at startup and flushing at shutdown.
# This value is recommended to be increased for installations with data dirs located in RAID array.
num.recovery.threads.per.data.dir=1

############################# Internal Topic Settings  #############################
# The replication factor for the group metadata internal topics "__consumer_offsets" and "__transaction_state"
# For anything other than development testing, a value greater than 1 is recommended for to ensure availability such as 3.
offsets.topic.replication.factor=1
transaction.state.log.replication.factor=1
transaction.state.log.min.isr=1

############################# Log Flush Policy #############################

# Messages are immediately written to the filesystem but by default we only fsync() to sync
# the OS cache lazily. The following configurations control the flush of data to disk.
# There are a few important trade-offs here:
#    1. Durability: Unflushed data may be lost if you are not using replication.
#    2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush.
#    3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to excessive seeks.
# The settings below allow one to configure the flush policy to flush data after a period of time or
# every N messages (or both). This can be done globally and overridden on a per-topic basis.

# The number of messages to accept before forcing a flush of data to disk
#log.flush.interval.messages=10000

# The maximum amount of time a message can sit in a log before we force a flush
#log.flush.interval.ms=1000

############################# Log Retention Policy #############################

# The following configurations control the disposal of log segments. The policy can
# be set to delete segments after a period of time, or after a given size has accumulated.
# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens
# from the end of the log.

# The minimum age of a log file to be eligible for deletion due to age
log.retention.hours=168

# A size-based retention policy for logs. Segments are pruned from the log unless the remaining
# segments drop below log.retention.bytes. Functions independently of log.retention.hours.
#log.retention.bytes=1073741824

# The maximum size of a log segment file. When this size is reached a new log segment will be created.
log.segment.bytes=1073741824

# The interval at which log segments are checked to see if they can be deleted according
# to the retention policies
log.retention.check.interval.ms=300000

############################# Zookeeper #############################

# Zookeeper connection string (see zookeeper docs for details).
# This is a comma separated host:port pairs, each corresponding to a zk
# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".
# You can also append an optional chroot string to the urls to specify the
# root directory for all kafka znodes.
zookeeper.connect=127.0.0.1:2181

# Timeout in ms for connecting to zookeeper
zookeeper.connection.timeout.ms=6000


############################# Group Coordinator Settings #############################

# The following configuration specifies the time, in milliseconds, that the GroupCoordinator will delay the initial consumer rebalance.
# The rebalance will be further delayed by the value of group.initial.rebalance.delay.ms as new members join the group, up to a maximum of max.poll.interval.ms.
# The default value for this is 3 seconds.
# We override this to 0 here as it makes for a better out-of-the-box experience for development and testing.
# However, in production environments the default value of 3 seconds is more suitable as this will help to avoid unnecessary, and potentially expensive, rebalances during application startup.
group.initial.rebalance.delay.ms=0
~

启动kafka服务：

[root@localhost bin]# nohup ./kafka-server-start.sh ../config/server.properties &

单机版的kafka测试，可以多打开几个会话窗口进行topic测试功能完备性
启动2个XSHELL客户端，一个用于生产者producer发送消息，一个用于消费者consumer接受消息。
运行producer，随机敲入几个字符，相当于把这个敲入的字符消息发送给队列。

[root@xiehao1 bin]# ./kafka-console-producer.sh --broker-list 127.0.0.1:9092 --top test
>12
>天才                             
>人

运行consumer，可以看到刚才发送的消息列表。

[root@xiehao1 bin]# ./kafka-console-consumer.sh --bootstrap-server 127.0.0.1:9092 --topic test --from-beginning
12
12
天才
人才

三、报错记录：

*启动服务遇见的错误-1：
kafka启动时报错：java.net.UnknownHostException: Name or service not known
解决方法：
1.打开/etc/hosts文件，加上ip和主机名

[root@xiehao1 etc]# vi /etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.197.129 xiehao1 localhost
~

启动ok*

*启动消费者时遇见的错误 -2：
无法接受消息
是kafka的server.properties的配置错误。主要是下面的内容配置有问题：

listeners=PLAINTEXT://:9092

将这句注释掉，然后在配置文件中添加下面的两行配置，指明当前broker的地址：

port=9092
host.name=10.90.7.2 #依据具体的服务器，配置相应的服务器的IP地址即可。

**
修改后，再次重启kafka服务，重新在某台服务器上启动消息生产者服务。*