Single-Chip USB-to-QUAD UART Data Transfer
Four independent UART interfaces
Integrated USB transceiver; no external resistor
UART Interface Features
Each UART interface supports the following:
Supports hardware flow control (RTS/CTS) Supports all modem control signals Data formats supported: -Data bits: 5, 6, 7, and 8-Stop bits: 1, 1.5, and 2
-Parity: odd, even, set, mark and none Baud rates: 300bps to 2Mbps
UART 3 (pins 1-6) supports interfacing to devices up to 6V
required
Integrated clock; no external crystal required Integrated programmable EEPROM for storing customizable product information On-chip power-on reset circuit
On-chip voltage regulator: 3.3V output
USB Peripheral Function Controller
USB Specification 2.0 compliant; full-speed
(12Mbps)
USB suspend states supported via SUSPEND pins
GPIO Interface Features
Total of 16 GPIO pins with configurable options Suspend pin support
Usable as inputs, open-drain or push-pull outputs 4 configurable clock outputs for external devices RS-485 bus transceiver control Toggle LED upon transmission Toggle LED upon reception
Virtual COM Port Drivers
Works with existing COM port PC applications Royalty-Free distribution license Windows 8/7/Vista/XP/Server 2003 Mac OS X Linux
Package Options
RoHS-UART 3 compliant 64-pin QFN (9x9
Supply Voltage
Self-powered: 3.0 to 3.6
mm)
V
USB bus powered: 4.0 to 5.5V VIO voltage: 1.8V to VDD
Temperature Range
–40 to +85 °C
InterfaceCopyright © 2012 by Silicon Laboratories
11.6.2012