linux内核flash_,flash大小选择和添加mtd的data分区 -- linux内核

需要修改位置：

(1)/linux-2.6/arch/mips/rt2880/Kconfig

(2)/linux-2.6/drivers/mtd/maps/ralink-flash.h

(3)/linux-2.6/drivers/mtd/maps/ralink-spi.c

(4)/vendors/Ralink/RT5350/config/4M_32M_config.linux-2.6(make dep 后生成的config.h)

(1)添加menuconfig中选项

choice

prompt "Flash Size"

default RT2880_FLASH_4M

config T2880_FLASH_2M

bool "2M"

config RT2880_FLASH_4M

bool "4M"

config RT2880_FLASH_8M

bool "8M"

config RT2880_FLASH_16M

bool "16M"

config RT2880_FLASH_32M

bool "32M"

#select RT2880_FLASH_32M

endchoice

#Data分区#注释部分不无效

choice

prompt "Flash Data Size"

default RT2880_FLASH_DATA_320KB

config RT2880_FLASH_DATA_0KB

bool "none(0)KB"

#config RT2880_FLASH_DATA_64KB

# bool "0x10000(64)KB"

#config RT2880_FLASH_DATA_128KB

# bool "0x20000(128)KB"

#config RT2880_FLASH_DATA_192KB

# bool "0x30000(192)KB"

#config RT2880_FLASH_DATA_256KB

# bool "0x40000(256)KB"

config RT2880_FLASH_DATA_320KB

bool "0x50000(320)KB"

config RT2880_FLASH_DATA_384KB

bool "0x60000(384)KB"

endchoice

config MTD_PHYSMAP_DATA_LEN

hex

default 0x0 if RT2880_FLASH_DATA_0KB

default 0x10000 if RT2880_FLASH_DATA_64KB

default 0x20000 if RT2880_FLASH_DATA_128KB

default 0x30000 if RT2880_FLASH_DATA_192KB

default 0x40000 if RT2880_FLASH_DATA_256KB

default 0x50000 if RT2880_FLASH_DATA_320KB

default 0x60000 if RT2880_FLASH_DATA_384KB

choice

(2)添加data分区大小，修改kernel分区大小。

#if defined (CONFIG_RT2880_FLASH_32M)

#define MTD_BOOT_PART_SIZE0x40000

#defineMTD_CONFIG_PART_SIZE0x20000

#defineMTD_FACTORY_PART_SIZE0x20000

#define MTD_DATA_PAPT_SIZE CONFIG_MTD_PHYSMAP_DATA_LEN/**/

#else

#if defined (RECONFIG_PARTITION_SIZE)

#if !defined (MTD_BOOT_PART_SIZE)

#error "Please define MTD_BOOT_PART_SIZE"

#endif

#if !defined (MTD_CONFIG_PART_SIZE)

#error "Please define MTD_CONFIG_PART_SIZE"

#endif

#if !defined (MTD_FACTORY_PART_SIZE)

#error "Please define MTD_FACTORY_PART_SIZE"

#endif

#else

#define MTD_BOOT_PART_SIZE0x30000

#defineMTD_CONFIG_PART_SIZE0x10000

#defineMTD_FACTORY_PART_SIZE0x10000

#define MTD_DATA_PAPT_SIZE CONFIG_MTD_PHYSMAP_DATA_LEN/*添加data分区长度*/

#endif

#endif

#ifdef CONFIG_RT2880_ROOTFS_IN_FLASH

#ifdef CONFIG_ROOTFS_IN_FLASH_NO_PADDING

#define CONFIG_MTD_KERNEL_PART_SIZ 0

#endif

#define MTD_ROOTFS_PART_SIZEIMAGE1_SIZE - (MTD_BOOT_PART_SIZE + MTD_CONFIG_PART_SIZE \

+ MTD_FACTORY_PART_SIZE + CONFIG_MTD_KERNEL_PART_SIZ + MTD_DATA_PAPT_SIZE)

#defineMTD_KERN_PART_SIZECONFIG_MTD_KERNEL_PART_SIZ

//#defineMTD_KERN_PART_SIZE0x310000

#else //CONFIG_RT2880_ROOTFS_IN_ROM

#define MTD_KERN_PART_SIZEIMAGE1_SIZE - (MTD_BOOT_PART_SIZE + MTD_CONFIG_PART_SIZE \

+ MTD_FACTORY_PART_SIZE + MTD_DATA_PAPT_SIZE)/*计算除去data分区长度后内存分区长度*/

//#defineMTD_KERN_PART_SIZE0x310000

#endif

(3)定义data分区

static struct mtd_partition rt2880_partitions[] = {

{

name: "ALL",

size: MTDPART_SIZ_FULL,

offset: 0,

},

/* Put your own partition definitions here */

{

name: "Bootloader",

size: MTD_BOOT_PART_SIZE,

offset: 0,

}, {

name: "Config",

size: MTD_CONFIG_PART_SIZE,

offset: MTDPART_OFS_APPEND

}, {

name: "Factory",

size: MTD_FACTORY_PART_SIZE,

offset: MTDPART_OFS_APPEND

#ifdef CONFIG_RT2880_ROOTFS_IN_FLASH

}, {

name: "Kernel",

size: MTD_KERN_PART_SIZE,

offset: MTDPART_OFS_APPEND,

}, {

name: "RootFS",

size: MTD_ROOTFS_PART_SIZE,

offset: MTDPART_OFS_APPEND,

#ifdef CONFIG_ROOTFS_IN_FLASH_NO_PADDING

}, {

name: "Kernel_RootFS",

size: MTD_KERN_PART_SIZE + MTD_ROOTFS_PART_SIZE,

offset: MTD_BOOT_PART_SIZE + MTD_CONFIG_PART_SIZE + MTD_FACTORY_PART_SIZE,

#endif

#else //CONFIG_RT2880_ROOTFS_IN_RAM

}, {

name: "Kernel",

size: MTD_KERN_PART_SIZE,

offset: MTDPART_OFS_APPEND,

#endif//CONFIG_RT2880_ROOTFS_IN_FLASH

#ifdef CONFIG_DUAL_IMAGE

}, {

name: "Kernel2",

size: MTD_KERN2_PART_SIZE,

offset: MTD_KERN2_PART_OFFSET,

#ifdef CONFIG_RT2880_ROOTFS_IN_FLASH

}, {

name: "RootFS2",

size: MTD_ROOTFS2_PART_SIZE,

offset: MTD_ROOTFS2_PART_OFFSET,

#endif

#endif//CONFIG_DUAL_IMAGE

/*DATA分区添加部分*/

}, {

name:"Date", /* mtdblock5 */

size:MTD_DATA_PAPT_SIZE,

offset: MTDPART_OFS_APPEND,/*偏移量，data开头位置*/

}

};