java ipv4和ipv6通信_IPV4和IPV6之间相互通信

网络拓扑：

R1:

ipv6 unicast-routing                                ===========开启ipv6

int f0/0

ip address 192.168.12.1 255.255.255.0

no shutdown

interface Loopback0

ipv6 address 2012:2012::1/64

ip route 192.168.23.0 255.255.255.0 192.168.12.2    ============配置静态路由

R2:

interface FastEthernet0/0

ip address 192.168.12.2 255.255.255.0

interface FastEthernet0/1

ip address 192.168.23.2 255.255.255.0

R3:

ipv6 unicast-routing                            ===============开启ipv6

interface FastEthernet0/1

ip address 192.168.23.3 255.255.255.0

interface Loopback0

ipv6 address 2014:2014::3/64

ip route 192.168.12.0 255.255.255.0 192.168.23.2  =============配置静态路由

测试：

R1#ping 192.168.23.3

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 192.168.23.3, timeout is 2 seconds:

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 28/56/76 ms

R1#

R3#ping 192.168.12.1

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 192.168.12.1, timeout is 2 seconds:

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 36/65/132 ms

R3#

配置tunnel隧道

R1：

ipv6 router ospf 1            ==========启用OSPFV3

router-id 1.1.1.1             ==========必须手动配置router-id

interface Tunnel1

no ip address

ipv6 address 2001::1/64

ipv6 ospf 1 area 0

tunnel source 192.168.12.1

tunnel destination 192.168.23.3

tunnel mode ipv6ip

!

interface Loopback0

ipv6 ospf 1 area 0

R3：

ipv6 router ospf 1

router-id 3.3.3.3

interface Tunnel1

no ip address

ipv6 address 2001::2/64

ipv6 ospf 1 area 0

tunnel source 192.168.23.3

tunnel destination 192.168.12.1

tunnel mode ipv6ip

!

interface Loopback0

ipv6 ospf 1 area 0

测试：

R1#ping 2014:2014::3 source 2012:2012::1

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 2014:2014::3, timeout is 2 seconds:

Packet sent with a source address of 2012:2012::1

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 28/64/100 ms

R1#

R3#ping 2012:2012::1 source 2014:2014::3

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 2012:2012::1, timeout is 2 seconds:

Packet sent with a source address of 2014:2014::3

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 36/59/104 ms

R3#