android7 sselinux,Building The Library

Building The Library¶

This document describes how to build Botan on Unix/POSIX and Windows

systems. The POSIX oriented descriptions should apply to most

common Unix systems (including OS X), along with POSIX-ish systems

like BeOS, QNX, and Plan 9. Currently, systems other than Windows and

POSIX (such as VMS, MacOS 9, OS/390, OS/400, …) are not supported by

the build system, primarily due to lack of access. Please contact the

maintainer if you would like to build Botan on such a system.

Botan’s build is controlled by configure.py, which is a Python script. Python 2.6 or later is required.

For the impatient, this works for most systems:

$ ./configure.py [--prefix=/some/directory]

$ make

$ make install

Or using nmake, if you’re compiling on Windows with Visual C++. On

platforms that do not understand the ‘#!’ convention for beginning

script files, or that have Python installed in an unusual spot, you

might need to prefix the configure.py command with python or

/path/to/python:

$ python ./configure.py [arguments]

Configuring the Build¶

The first step is to run configure.py, which is a Python script

that creates various directories, config files, and a Makefile for

building everything. This script should run under a vanilla install of

Python 2.6, 2.7, or 3.x.

The script will attempt to guess what kind of system you are trying to

compile for (and will print messages telling you what it guessed).

You can override this process by passing the options --cc,

--os, and --cpu.

You can pass basically anything reasonable with --cpu: the script

knows about a large number of different architectures, their

sub-models, and common aliases for them. You should only select the

64-bit version of a CPU (such as “sparc64” or “mips64”) if your

operating system knows how to handle 64-bit object code - a 32-bit

kernel on a 64-bit CPU will generally not like 64-bit code.

By default the script tries to figure out what will work on your

system, and use that. It will print a display at the end showing which

algorithms have and have not been enabled. For instance on one system

we might see lines like:

INFO: Skipping (dependency failure): certstor_sqlite3 sessions_sqlite3

INFO: Skipping (incompatible CPU): aes_power8

INFO: Skipping (incompatible OS): darwin_secrandom getentropy win32_stats

INFO: Skipping (incompatible compiler): aes_armv8 pmull sha1_armv8 sha2_32_armv8

INFO: Skipping (no enabled compression schemes): compression

INFO: Skipping (requires external dependency): boost bzip2 lzma openssl sqlite3 tpm zlib

The ones that are skipped because they are require an external

dependency have to be explicitly asked for, because they rely on third

party libraries which your system might not have or that you might not

want the resulting binary to depend on. For instance to enable zlib

support, add --with-zlib to your invocation of configure.py.

All available modules can be listed with --list-modules.

You can control which algorithms and modules are built using the

options --enable-modules=MODS and --disable-modules=MODS, for

instance --enable-modules=zlib and --disable-modules=xtea,idea.

Modules not listed on the command line will simply be loaded if needed

or if configured to load by default. If you use --minimized-build,

only the most core modules will be included; you can then explicitly

enable things that you want to use with --enable-modules. This is

useful for creating a minimal build targeting to a specific

application, especially in conjunction with the amalgamation option;

see The Amalgamation Build and Minimized Builds.

For instance:

$ ./configure.py --minimized-build --enable-modules=rsa,eme_oaep,emsa_pssr

will set up a build that only includes RSA, OAEP, PSS along with any

required dependencies. Note that a minimized build does not by default

include any random number generator, which is needed for example to

generate keys, nonces and IVs. See Random Number Generators on which random number

generators are available.

Cross Compiling¶

Cross compiling refers to building software on one type of host (say Linux

x86-64) but creating a binary for some other type (say MinGW x86-32). This is

completely supported by the build system. To extend the example, we must tell

configure.py to use the MinGW tools:

$ ./configure.py --os=mingw --cpu=x86_32 --cc-bin=i686-w64-mingw32-g++ --ar-command=i686-w64-mingw32-ar

...

$ make

...

$ file botan.exe

botan.exe: PE32 executable (console) Intel 80386, for MS Windows

Note

For whatever reason, some distributions of MinGW lack support for

threading or mutexes in the C++ standard library. You can work around

this by disabling thread support using --without-os-feature=threads

You can also specify the alternate tools by setting the CXX and AR

environment variables (instead of the –cc-bin and –ar-command options), as

is commonly done with autoconf builds.

On Unix¶

The basic build procedure on Unix and Unix-like systems is:

$ ./configure.py [--enable-modules=] [--cc=CC]

$ make

$ make check

If the tests look OK, install:

$ make install

On Unix systems the script will default to using GCC; use --cc if

you want something else. For instance use --cc=icc for Intel C++

and --cc=clang for Clang.

The make install target has a default directory in which it will

install Botan (typically /usr/local). You can override this by

using the --prefix argument to configure.py, like so:

$ ./configure.py --prefix=/opt

On some systems shared libraries might not be immediately visible to

the runtime linker. For example, on Linux you may have to edit

/etc/ld.so.conf and run ldconfig (as root) in order for new

shared libraries to be picked up by the linker. An alternative is to

set your LD_LIBRARY_PATH shell variable to include the directory

that the Botan libraries were installed into.

On macOS¶

A build on macOS works much like that on any other Unix-like system.

To build a universal binary for macOS, you need to set some additional

build flags. Do this with the configure.py flag –cc-abi-flags:

--cc-abi-flags="-force_cpusubtype_ALL -mmacosx-version-min=10.4 -arch i386 -arch ppc"

On Windows¶

Note

The earliest versions of Windows supported are Windows 7 and Windows 2008 R2

You need to have a copy of Python installed, and have both Python and

your chosen compiler in your path. Open a command shell (or the SDK

shell), and run:

$ python configure.py --cc=msvc --os=windows

$ nmake

$ nmake check

$ nmake install

Botan supports the nmake replacement Jom

which enables you to run multiple build jobs in parallel.

For MinGW, use:

$ python configure.py --cc=gcc --os=mingw

$ make

By default the install target will be C:\botan; you can modify

this with the --prefix option.

When building your applications, all you have to do is tell the

compiler to look for both include files and library files in

C:\botan, and it will find both. Or you can move them to a

place where they will be in the default compiler search paths (consult

your documentation and/or local expert for details).

For iOS using XCode¶

For iOS, you typically build for 3 architectures: armv7 (32 bit, older

iOS devices), armv8-a (64 bit, recent iOS devices) and x86_64 for

the iPhone simulator. You can build for these 3 architectures and then

create a universal binary containing code for all of these

architectures, so you can link to Botan for the simulator as well as

for an iOS device.

To cross compile for armv7, configure and make with:

$ ./configure.py --os=ios --prefix="iphone-32" --cpu=armv7 --cc=clang \

--cc-abi-flags="-arch armv7"

$ xcrun --sdk iphoneos make install

To cross compile for armv8-a, configure and make with:

$ ./configure.py --os=ios --prefix="iphone-64" --cpu=armv8-a --cc=clang \

--cc-abi-flags="-arch arm64"

$ xcrun --sdk iphoneos make install

To compile for the iPhone Simulator, configure and make with:

$ ./configure.py --os=ios --prefix="iphone-simulator" --cpu=x86_64 --cc=clang \

--cc-abi-flags="-arch x86_64"

$ xcrun --sdk iphonesimulator make install

Now create the universal binary and confirm the library is compiled

for all three architectures:

$ xcrun --sdk iphoneos lipo -create -output libbotan-2.a \

iphone-32/lib/libbotan-2.a \

iphone-64/lib/libbotan-2.a \

iphone-simulator/lib/libbotan-2.a

$ xcrun --sdk iphoneos lipo -info libbotan-2.a

Architectures in the fat file: libbotan-2.a are: armv7 x86_64 armv64

The resulting static library can be linked to your app in Xcode.

For Android¶

Modern versions of Android NDK use Clang and support C++11. Simply

configure using the appropriate NDK compiler:

$ export CXX=/opt/android-ndk/toolchains/llvm/prebuilt/linux-x86_64/bin/aarch64-linux-android28-clang++

$ ./configure.py --os=android --cc=clang --cpu=arm64

Docker¶

To build android version, there is the possibility to use

the docker way:

sudo ANDROID_SDK_VER=21 ANDROID_ARCH=arm64 src/scripts/docker-android.sh

This will produce the docker-builds/android folder containing

each architecture compiled.

Emscripten (WebAssembly)¶

To build for WebAssembly using Emscripten, try:

CXX=em++ ./configure.py --cc=clang --cpu=llvm --os=emscripten

make

This will produce bitcode files botan-test.bc and botan.bc

along with a static archive libbotan-2.a which can linked with

other modules. To convert the tests into a WASM file which can be

executed on a browser, use:

em++ -s ALLOW_MEMORY_GROWTH=1 -s DISABLE_EXCEPTION_CATCHING=0 -s WASM=1 \

--preload-file src/tests/data botan-test.bc -o botan-test.html

Supporting Older Distros¶

Some “stable” distributions, notably RHEL/CentOS, ship very obsolete

versions of binutils, which do not support more recent CPU instructions.

As a result when building you may receive errors like:

Error: no such instruction: `sha256rnds2 %xmm0,%xmm4,%xmm3'

Depending on how old your binutils is, you may need to disable BMI2,

AVX2, SHA-NI, and/or RDSEED. These can be disabled by passing the

flags --disable-bmi2, --disable-avx2, --disable-sha-ni,

and --disable-rdseed to configure.py.

Other Build-Related Tasks¶

Building The Documentation¶

There are two documentation options available, Sphinx and Doxygen.

Sphinx will be used if sphinx-build is detected in the PATH, or if

--with-sphinx is used at configure time. Doxygen is only enabled

if --with-doxygen is used. Both are generated by the makefile

target docs.

The Amalgamation Build¶

You can also configure Botan to be built using only a single source file; this

is quite convenient if you plan to embed the library into another application.

To generate the amalgamation, run configure.py with whatever options you

would ordinarily use, along with the option --amalgamation. This will create

two (rather large) files, botan_all.h and botan_all.cpp.

Note

The library will as usual be configured to target some specific operating

system and CPU architecture. You can use the CPU target “generic” if you need

to target multiple CPU architectures, but this has the effect of disabling

all CPU specific features such as SIMD, AES instruction sets, or inline

assembly. If you need to ship amalgamations for multiple targets, it would be

better to create different amalgamation files for each individual target.

Whenever you would have included a botan header, you can then include

botan_all.h, and include botan_all.cpp along with the rest of the source

files in your build. If you want to be able to easily switch between amalgamated

and non-amalgamated versions (for instance to take advantage of prepackaged

versions of botan on operating systems that support it), you can instead ignore

botan_all.h and use the headers from build/include as normal.

You can also build the library using Botan’s build system (as normal) but

utilizing the amalgamation instead of the individual source files by running

something like ./configure.py --amalgamation && make. This is essentially a

very simple form of link time optimization; because the entire library source is

visible to the compiler, it has more opportunities for interprocedural

optimizations. Additionally (assuming you are not making use of a compiler

cache such as ccache or sccache) amalgamation builds usually have

significantly shorter compile times for full rebuilds.

Modules Relying on Third Party Libraries¶

Currently configure.py cannot detect if external libraries are

available, so using them is controlled explicitly at build time

by the user using

--with-bzip2 enables the filters providing bzip2 compression and

decompression. Requires the bzip2 development libraries to be installed.

--with-zlib enables the filters providing zlib compression and

decompression. Requires the zlib development libraries to be installed.

--with-lzma enables the filters providing lzma compression and

decompression. Requires the lzma development libraries to be installed.

--with-sqlite3 enables using sqlite3 databases in various contexts

(TLS session cache, PSK database, etc).

--with-openssl adds an engine that uses OpenSSL for some ciphers, hashes,

and public key operations. OpenSSL 1.0.2 or later is supported. LibreSSL can

also be used.

--with-tpm adds support for using TPM hardware via the TrouSerS library.

--with-boost enables using some Boost libraries. In particular

Boost.Filesystem is used for a few operations (but on most platforms, a

native API equivalent is available), and Boost.Asio is used to provide a few

extra TLS related command line utilities.

Multiple Builds¶

It may be useful to run multiple builds with different configurations.

Specify --with-build-dir=

different directory.

Setting Distribution Info¶

The build allows you to set some information about what distribution

this build of the library comes from. It is particularly relevant to

people packaging the library for wider distribution, to signify what

distribution this build is from. Applications can test this value by

checking the string value of the macro BOTAN_DISTRIBUTION_INFO. It

can be set using the --distribution-info flag to configure.py,

and otherwise defaults to “unspecified”. For instance, a Gentoo ebuild might set it with

--distribution-info="Gentoo ${PVR}" where ${PVR} is an ebuild

variable automatically set to a combination of the library and ebuild

versions.

Local Configuration Settings¶

You may want to do something peculiar with the configuration; to

support this there is a flag to configure.py called

--with-local-config=. The contents of the file are

inserted into build/build.h which is (indirectly) included

into every Botan header and source file.

Enabling or Disabling Use of Certain OS Features¶

Botan uses compile-time flags to enable or disable use of certain operating

specific functions. You can also override these at build time if desired.

The default feature flags are given in the files in src/build-data/os in the

target_features block. For example Linux defines flags like proc_fs,

getauxval, and sockets. The configure.py option

--list-os-features will display all the feature flags for all operating

system targets.

To disable a default-enabled flag, use --without-os-feature=feat1,feat2,...

To enable a flag that isn’t otherwise enabled, use --with-os-feature=feat.

For example, modern Linux systems support the getentropy call, but it is not

enabled by default because many older systems lack it. However if you know you

will only deploy to recently updated systems you can use

--with-os-feature=getentropy to enable it.

A special case if dynamic loading, which applications for certain environments

will want to disable. There is no specific feature flag for this, but

--disable-modules=dyn_load will prevent it from being used.

Note

Disabling dyn_load module will also disable the PKCS #11

wrapper, which relies on dynamic loading.

Configuration Parameters¶

There are some configuration parameters which you may want to tweak

before building the library. These can be found in build.h. This

file is overwritten every time the configure script is run (and does

not exist until after you run the script for the first time).

Also included in build/build.h are macros which let applications

check which features are included in the current version of the

library. All of them begin with BOTAN_HAS_. For example, if

BOTAN_HAS_RSA is defined, then an application knows that this

version of the library has RSA available.

BOTAN_MP_WORD_BITS: This macro controls the size of the words used for

calculations with the MPI implementation in Botan. It must be set to either 32

or 64 bits. The default is chosen based on the target processor. There is

normally no reason to change this.

BOTAN_DEFAULT_BUFFER_SIZE: This constant is used as the size of

buffers throughout Botan. The default should be fine for most

purposes, reduce if you are very concerned about runtime memory usage.

Building Applications¶

Unix¶

Botan usually links in several different system libraries (such as

librt or libz), depending on which modules are configured at

compile time. In many environments, particularly ones using static

libraries, an application has to link against the same libraries as

Botan for the linking step to succeed. But how does it figure out what

libraries it is linked against?

The answer is to ask the botan command line tool using

the config and version commands.

botan version: Print the Botan version number.

botan config prefix: If no argument, print the prefix where Botan is

installed (such as /opt or /usr/local).

botan config cflags: Print options that should be passed to the

compiler whenever a C++ file is compiled. Typically this is used for

setting include paths.

botan config libs: Print options for which libraries to link to

(this will include a reference to the botan library itself).

Your Makefile can run botan config and get the options

necessary for getting your application to compile and link, regardless

of whatever crazy libraries Botan might be linked against.

Windows¶

No special help exists for building applications on Windows. However,

given that typically Windows software is distributed as binaries, this

is less of a problem - only the developer needs to worry about it. As

long as they can remember where they installed Botan, they just have

to set the appropriate flags in their Makefile/project file.

Language Wrappers¶

Building the Python wrappers¶

The Python wrappers for Botan use ctypes and the C89 API so no special

build step is required, just import botan2.py

See Python Bindings for more information about

the Python bindings.

Minimized Builds¶

Many developers wish to configure a minimized build which contains only the

specific features their application will use. In general this is straighforward:

use --minimized-build plus --enable-modules= to enable the specific modules

you wish to use. Any such configurations should build and pass the tests; if you

encounter a case where it doesn’t please file an issue.

The only trick is knowing which features you want to enable. The most common

difficulty comes with entropy sources. By default, none are enabled, which means

if you attempt to use AutoSeeded_RNG, it will fail. The easiest resolution

is to also enable system_rng which can act as either an entropy source or

used directly as the RNG.

If you are building for x86, ARM, or POWER, it can be beneficial to enable

hardware support for the relevant instruction sets with modules such as

aes_ni and clmul for x86, or aes_armv8, pmull, and

sha2_32_armv8 on ARMv8. SIMD optimizations such as chacha_avx2 also can

provide substantial performance improvements.

Note

In a future release, hardware specific modules will be enabled by default if

the underlying “base” module is enabled.

If you are building a TLS application, you may (or may not) want to include

tls_cbc which enables support for CBC ciphersuites. If tls_cbc is

disabled, then it will not be possible to negotiate TLS v1.0/v1.1. In general

this should be considered a feature; only enable this if you need backward

compatability with obsolete clients or servers.

For TLS another useful feature which is not enabled by default is the

ChaCha20Poly1305 ciphersuites. To enable these, add chacha20poly1305.

Configure Script Options¶

--cpu=CPU¶

Set the target CPU architecture. If not used, the arch of the current

system is detected (using Python’s platform module) and used.

--os=OS¶

Set the target operating system.

--cc=COMPILER¶

Set the desired build compiler

--cc-min-version=MAJOR.MINOR¶

Set the minimal version of the target

compiler. Use –cc-min-version=0.0 to support all compiler

versions. Default is auto detection.

--cc-bin=BINARY¶

Set path to compiler binary

If not provided, the value of the CXX environment variable is used if set.

--cc-abi-flags=FLAGS¶

Set ABI flags, which for the purposes of this option mean options

which should be passed to both the compiler and linker.

--cxxflags=FLAGS¶

Override all compiler flags. This is equivalent to setting CXXFLAGS

in the environment.

--extra-cxxflags=FLAGS¶

Set extra compiler flags, which are appended to the default set. This

is useful if you want to set just one or two additional options but

leave the normal logic for selecting flags alone.

--ldflags=FLAGS¶

Set flags to pass to the linker. This is equivalent to setting LDFLAGS

--ar-command=AR¶

Set the path to the tool to use to create static archives (ar).

This is normally only used for cross-compilation.

If not provided, the value of the AR environment variable is used if set.

--ar-options=AR_OPTIONS¶

Specify the options to pass to ar.

If not provided, the value of the AR_OPTIONS environment variable is used if set.

--msvc-runtime=RT¶

Specify the MSVC runtime to use (MT, MD, MTd, or MDd). If not specified,

picks either MD or MDd depending on if debug mode is set.

--with-endian=ORDER¶

The parameter should be either “little” or “big”. If not used then if

the target architecture has a default, that is used. Otherwise left

unspecified, which causes less optimal codepaths to be used but will

work on either little or big endian.

--with-os-features=FEAT¶

Specify an OS feature to enable. See src/build-data/os and

doc/os.rst for more information.

--without-os-features=FEAT¶

Specify an OS feature to disable.

--disable-sse2¶

Disable use of SSE2 intrinsics

--disable-ssse3¶

Disable use of SSSE3 intrinsics

--disable-sse4.1¶

Disable use of SSE4.1 intrinsics

--disable-sse4.2¶

Disable use of SSE4.2 intrinsics

--disable-avx2¶

Disable use of AVX2 intrinsics

--disable-bmi2¶

Disable use of BMI2 intrinsics

--disable-rdrand¶

Disable use of RDRAND intrinsics

--disable-rdseed¶

Disable use of RDSEED intrinsics

--disable-aes-ni¶

Disable use of AES-NI intrinsics

--disable-sha-ni¶

Disable use of SHA-NI intrinsics

--disable-altivec¶

Disable use of AltiVec intrinsics

--disable-neon¶

Disable use of NEON intrinsics

--disable-armv8crypto¶

Disable use of ARMv8 Crypto intrinsics

--disable-powercrypto¶

Disable use of POWER Crypto intrinsics

--with-debug-info¶

Include debug symbols.

--with-sanitizers¶

Enable some default set of sanitizer checks. What exactly is enabled

depends on the compiler.

--enable-sanitizers=SAN¶

Enable specific sanitizers. See src/build-data/cc for more information.

--without-stack-protector¶

Disable stack smashing protections. not recommended

--with-coverage¶

Add coverage info and disable optimizations

--with-coverage-info¶

Add coverage info, but leave optimizations alone

--disable-shared-library¶

Disable building a shared library

--disable-static-library¶

Disable building static library

--optimize-for-size¶

Optimize for code size.

--no-optimizations¶

Disable all optimizations for debugging.

--debug-mode¶

Enable debug info and disable optimizations

--amalgamation¶

Use amalgamation to build

--system-cert-bundle=PATH¶

Set a path to a file containing one or more trusted CA certificates in

PEM format. If not given, some default locations are checked.

--with-build-dir=DIR¶

Setup the build in a specified directory instead of ./build

--with-external-includedir=DIR¶

Search for includes in this directory. Provide this parameter multiple times to

define multiple additional include directories.

--with-external-libdir=DIR¶

Add DIR to the link path. Provide this parameter multiple times to define

multiple additional library link directories.

--define-build-macro¶

Set a compile-time pre-processor definition (i.e. add a -D… to the compiler

invocations). Provide this parameter multiple times to add multiple compile-time

definitions. Both KEY=VALUE and KEY (without specific value) are supported.

--with-sysroot-dir=DIR¶

Use specified dir for system root while cross-compiling

--with-openmp¶

Enable use of OpenMP

--link-method=METHOD¶

During build setup a directory linking to each header file is created.

Choose how the links are performed (options are “symlink”, “hardlink”,

or “copy”).

--with-local-config=FILE¶

Include the contents of FILE into the generated build.h

--distribution-info=STRING¶

Set distribution specific version information

--maintainer-mode¶

A build configuration used by library developers, which enables extra

warnings and turns most warnings into errors.

Warning

When this option is used, all relevant warnings available in the

most recent release of GCC/Clang are enabled, so it may fail to

build if your compiler is not sufficiently recent. In addition

there may be non-default configurations or unusual platforms which

cause warnings which are converted to errors. Patches addressing

such warnings are welcome, but otherwise no support is available

when using this option.

--werror-mode¶

Turns most warnings into errors.

--no-install-python-module¶

Skip installing Python module.

--with-python-versions=N.M¶

Where to install botan2.py. By default this is chosen to be the

version of Python that is running configure.py.

--with-valgrind¶

Use valgrind API to perform additional checks. Not needed by end users.

--unsafe-fuzzer-mode¶

Disable essential checks for testing. UNSAFE FOR PRODUCTION

--build-fuzzers=TYPE¶

Select which interface the fuzzer uses. Options are “afl”,

“libfuzzer”, “klee”, or “test”. The “test” mode builds fuzzers that

read one input from stdin and then exit.

--with-fuzzer-lib=LIB¶

Specify an additional library that fuzzer binaries must link with.

--build-targets=BUILD_TARGETS¶

Build only the specific targets and tools

(static, shared, cli, tests, bogo_shim).

--boost-library-name¶

Provide an alternative name for a boost library. Depending on the platform and

boost’s build configuration these library names differ significantly (see Boost docs).

The provided library name must be suitable as identifier in a linker parameter,

e.g on unix: boost_system or windows: libboost_regex-vc71-x86-1_70.

--without-documentation¶

Skip building/installing documentation

--with-sphinx¶

Use Sphinx to generate the handbook

--with-pdf¶

Use Sphinx to generate PDF doc

--with-rst2man¶

Use rst2man to generate a man page for the CLI

--with-doxygen¶

Use Doxygen to generate API reference

--module-policy=POL¶

The option --module-policy=POL enables modules required by and

disables modules prohibited by a text policy in src/build-data/policy.

Additional modules can be enabled if not prohibited by the policy.

Currently available policies include bsi, nist and modern:

$ ./configure.py --module-policy=bsi --enable-modules=tls,xts

--enable-modules=MODS¶

Enable some specific modules

--disable-modules=MODS¶

Disable some specific modules

--minimized-build¶

Start with the bare minimum. This is mostly useful in conjuction with

--enable-modules to get a build that has just the features a

particular application requires.

--with-boost¶

Use Boost.Asio for networking support. This primarily affects the

command line utils.

--with-bzip2¶

Enable bzip2 compression

--with-lzma¶

Enable lzma compression

--with-zlib¶

Enable using zlib compression

--with-openssl¶

Enable using OpenSSL for certain operations

--with-commoncrypto¶

Enable using CommonCrypto for certain operations

--with-sqlite3¶

Enable using sqlite3 for data storage

--with-tpm¶

Enable support for TPM

--program-suffix=SUFFIX¶

A string to append to all program binaries.

--library-suffix=SUFFIX¶

A string to append to all library names.

--prefix=DIR¶

Set the install prefix.

--docdir=DIR¶

Set the documentation installation dir.

--bindir=DIR¶

Set the binary installation dir.

--libdir=DIR¶

Set the library installation dir.

--mandir=DIR¶

Set the man page installation dir.

--includedir=DIR¶

Set the include file installation dir.

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值