# MySQL Server Instance Configuration File#----------------------------------------------------------------------
# Generated bythe MySQL Server Instance Configuration Wizard
#
#
# Installation Instructions
#----------------------------------------------------------------------
#
#On Linux you can copy this file to /etc/my.cnf to setglobal options,
# mysql-data-dir/my.cnf to set server-specific options
# (@localstatedir@ for this installation) or to#~/.my.cnf to set user-specific options.
#
#On Windows you should keep this file inthe installation directory
#of your server (e.g. C:\Program Files\MySQL\MySQL Server X.Y). To# make sure the server reads the configfile use the startup option# "--defaults-file".
#
#To run run the server from the command line, execute this ina
# command line shell, e.g.
# mysqld--defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini"
#
#To install the server as a Windows service manually, execute this ina
# command line shell, e.g.
# mysqld--install MySQLXY --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini"
#
#And then execute this in a command line shell tostart the server, e.g.
# net start MySQLXY
#
#
# Guildlinesfor editing this file#----------------------------------------------------------------------
#
#In this file, you can use all longoptions that the program supports.
#If you want toknow the options a program supports, start the program
#with the "--help" option.
#
# More detailed information about the individual options can also be
# foundinthe manual.
#
#
# CLIENT SECTION
#----------------------------------------------------------------------
#
# The following options will beread byMySQL client applications.
# Note thatonly client applications shipped byMySQL are guaranteed
#to read this section. If you want your own MySQL client program to# honor thesevalues, you need to specify it as an optionduring the
# MySQL client library initialization.
#[client]port=3306
[mysql]
default-character-set=utf8
# SERVER SECTION
#----------------------------------------------------------------------
#
# The following options will beread bythe MySQL Server. Make sure that
# you have installed the server correctly (see above) so it reads this
#file.
#[mysqld]log_bin=on
log=C:\Program Files\MySQL\MySQL Server 5.5\mylog.loglog_output=file# The TCP/IP Port the MySQL Server will listen onport=3306#Pathto installation directory. All paths are usually resolved relative tothis.
basedir="C:/Program Files/MySQL/MySQL Server 5.5/"
#Pathto the databaseroot
datadir="C:/MYSQLDataBase/"
# Thedefault character set that will be used when a new schema or table is# createdand no character set isdefinedcharacter-set-server=utf8
# Thedefault storage engine that will be used when create new tables when
default-storage-engine=INNODB
# The maximum amountofconcurrent sessions the MySQL server will
# allow. Oneof these connections will be reserved for a user with# SUPERprivileges to allow the administrator to login even ifthe
# connection limit has been reached.
max_connections=800# Query cacheis used to cache SELECT results and later returnthem
# without actual executing the same queryonce again. Havingthe query
# cache enabled may resultin significant speed improvements, ifyour
# have a lotof identical queries andrarely changing tables. See the
# "Qcache_lowmem_prunes" status variableto check if the currentvalue
#is high enough for your load.
# Note:In case your tables change very often or ifyour queries are
# textually different every time, the query cache may resultina
# slowdown insteadofa performance improvement.
query_cache_size=58M
# Thenumber of open tables for allthreads. Increasing this value
# increases thenumber of filedescriptors that mysqld requires.
# Therefore you haveto make sure to set the amount of openfiles
# allowedto at least 4096 in the variable "open-files-limit" in# section[mysqld_safe]table_cache=1520# Maximum sizefor internal (in-memory) temporary tables. If a table# grows larger than this value, itis automatically converted to disk# basedtable This limitation is for a single table. There can be many
#ofthem.
tmp_table_size=21M
# How many threads we should keepin a cache for reuse. Whena client
# disconnects, the client‘s threads are put in the cache if there aren‘t
# more than thread_cache_size threadsfrombefore. This greatly reduces
# the amountof thread creations needed if you have a lot ofnew
# connections. (Normally this doesn‘t give a notable performance
# improvement if you have a good thread implementation.)
thread_cache_size=38
#*** MyISAM Specific options
# The maximum size of the temporary file MySQL is allowed to use while
# recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE.
# If the file-size would be bigger than this, the index will be created
# through the key cache (which is slower).
myisam_max_sort_file_size=100G
# If the temporary file used for fast index creation would be bigger
# than using the key cache by the amount specified here, then prefer the
# key cache method. This is mainly used to force long character keys in
# large tables to use the slower key cache method to create the index.
myisam_sort_buffer_size=21M
# Size of the Key Buffer, used to cache index blocks for MyISAM tables.
# Do not set it larger than 30% of your available memory, as some memory
# is also required by the OS to cache rows. Even if you‘re notusing
# MyISAM tables, you should stillset it to 8-64M asit will also be
# usedfor internal temporary disktables.
key_buffer_size=9M
# Sizeof the buffer used for doing full table scans ofMyISAM tables.
# Allocated per thread,if a full scan isneeded.
read_buffer_size=64K
read_rnd_buffer_size=256K
# This bufferis allocated when MySQL needs to rebuild the index in# REPAIR, OPTIMZE,ALTER table statements as well as in LOADDATA INFILE
#into an empty table. It is allocated per thread so be careful with# large settings.
sort_buffer_size=256K
#*** INNODB Specific options ***innodb_data_home_dir="C:/MYSQLDataBase/"
#Use this option if you have a MySQL server withInnoDB support enabled
# but you donot plan to use it. This will save memory and disk space#and speed up somethings.
#skip-innodb
# Additional memory pool thatis used by InnoDB tostore metadata
# information.If InnoDB requires more memory forthis purpose it will
# startto allocate it from the OS. As this is fast enough onmost
# recent operating systems, you normally donot need tochange this
# value. SHOW INNODB STATUS will display thecurrentamount used.
innodb_additional_mem_pool_size=7M
#If set to 1, InnoDB will flush (fsync) the transaction logs tothe
#disk at each commit, which offers full ACID behavior. Ifyou are
# willingto compromise this safety, andyou are running small
# transactions, you mayset this to 0 or 2 to reduce disk I/O tothe
# logs. Value0 means that the log is only written to the log file and# thelog file flushed to disk approximately once per second. Value 2# means thelog is written to the log file at each commit, but the log#file is only flushed to disk approximately onceper second.
innodb_flush_log_at_trx_commit=1# The sizeof the buffer InnoDB uses for buffering log data. As soon as# itis full, InnoDB will have to flush it to disk. As it isflushed
#once per second anyway, it does not make sense tohave it very large
# (evenwith longtransactions).
innodb_log_buffer_size=4M
# InnoDB, unlike MyISAM, uses a buffer poolto cache both indexes and# row data. The bigger youset this the less disk I/O is needed to# access datain tables. On a dedicated database server you may setthis
# parameter upto 80% of the machine physical memory size. Do not setit
# too large, though, because competitionofthe physical memory may
# cause pagingin the operating system. Note that on 32bitsystems you
# might be limitedto 2-3.5G of user level memory per process, so do not#setit too high.
innodb_buffer_pool_size=324M
# Sizeof each log file in a log group. You should setthe combined size
#of log files to about 25%-100% of your buffer pool size toavoid
# unneeded buffer pool flush activityon log fileoverwrite. However,
# note that a larger logfile size will increase the time neededforthe
# recovery process.
innodb_log_file_size=65M
#Number ofthreads allowed inside the InnoDB kernel. The optimal value
# depends highlyon the application, hardware as well asthe OS
# scheduler properties. A too high value may leadtothread thrashing.
innodb_thread_concurrency=10innodb_flush_method=normal