matlab 读取voi文件,[转]DICOM图像显示时文件里的VOILUT和WINDOWCENTER/WIDH同用户手工调节窗宽窗位之间的关系...

IHE Radiology

Technical Framework Volume 2

4.16.4.2.2.1 Display of Digital X-Ray, Mammo and Intra-Oral

Images

For the “For Presentation” variant of the Digital X-Ray Image, the

Digital Mammography Image, and the Digital Intra-oral X-Ray Image, the Image Display or

Imaging Document Consumer actor shall have both the capability to apply all the

transformations specified by the VOI LUT Sequence (0028,3010) and the capability to apply all the

transformations specified by the Window Width (0028,1051)/Window Center (0028,1050)/VOI LUT

Function (0028,1056)

attributes in the DX Image Module as selected by the user from the

choices available (e.g., guided by Window Center/Width Explanation (0028,1055) or LUT

Explanation(0028,3003).

If VOI LUT Function (0028,1056) is absent, then Window Width

(0028,1051)/Window Center (0028,1050) shall be assumed to be the parameters of a linear

window operation. VOI LUT Function (0028,1056) values of “SIGMOID” and “LINEAR” shall be

supported.

The Image Display or Imaging Document Consumer shall support the

application of LUT Data (0028,3006) in items of the VOI LUT Sequence (0028,3010) regardless

of the Value Representation (i.e., the DICOM standard allows either OW or US

Value Representation).

The Image Display or Imaging Document Consumer actor must also

support pixel rendering according to the Grayscale Standard Display Function (GSDF) defined

in DICOM 2009 PS 3.14, because the output values of these images are always

P-Values. If the DICOM image is referenced by other DICOM composite objects,

such as Grayscale Softcopy Presentation States, it is optional for the Image Display

or Imaging Document Consumer to actually retrieve and display/apply these objects.

4.16.4.2.2.1.1.4 Image Contrast Adjustment

As described in 4.16.4.2.2.1 Display of Digital X-Ray, Mammography

and Intra-Oral Images, the Image Display shall provide the user with the ability to select

amongst the available window and VOI LUT choices available in the image object.

Subsequent to the initial application of the chosen contrast

transformation, the Image Display actor shall allow the user to adjust the contrast without reverting

to a purely linear transformation:

If the chosen

contrast transformation is a lookup table, then the Image Display

shall allow the

input value of the lookup table to be stretched and translated so

as to give the affect of adjusting contrast and brightness whilst applying the same general

shape as the curve encoded in the lookup table. To provide feedback to the user, the

“window width” can be reported as the adjusted range of input values to the LUT, and the

“window center” can be reported as the center value of that range.

If the chosen contrast

transformation is a sigmoid shaped VOI LUT Function

parameterized

by the window center and width, then the Image Display shall allow

the window center and width values to be adjusted and a sigmoid function reapplied.

If a Pixel Padding Value (0028,0120) only is present in the image

then image contrast manipulations shall be not be applied to those pixels with the

value specified in Pixel Padding Value (0028,0120).

If both Pixel Padding Value (0028,0120) and Pixel Padding Range

Limit (0028,0121) are present in the image then image contrast manipulations shall not be applied

to those pixels with values in the range between the values of Pixel Padding Value (0028,0120) and

Pixel Padding Range Limit (0028,0121), inclusive.