init android x86 rc,[android-x86-6.0-rc1] /system/etc/init.sh-CSDN博客

# License: GNU Public License v2 or later

function set_property()

{

setprop "$1" "$2"

[ -n "$DEBUG" ] && echo "$1"="$2" >> /dev/x86.prop

}

function init_misc()

{

# device information

setprop ro.product.manufacturer "$(cat $DMIPATH/sys_vendor)"

setprop ro.product.model "$PRODUCT"

# a hack for USB modem

lsusb | grep 1a8d:1000 && eject

# in case no cpu governor driver autoloads

[ -d /sys/devices/system/cpu/cpu0/cpufreq ] || modprobe acpi-cpufreq

}

function init_hal_audio()

{

case "$PRODUCT" in

VirtualBox*|Bochs*)

[ -d /proc/asound/card0 ] || modprobe snd-sb16 isapnp=0 irq=5

;;

esac

}

function init_hal_bluetooth()

{

for r in /sys/class/rfkill/*; do

type=$(cat $r/type)

[ "$type" = "wlan" -o "$type" = "bluetooth" ] && echo 1 > $r/state

done

case "$PRODUCT" in

T10*TA|HP*Omni*)

BTUART_PORT=/dev/ttyS1

;;

MacBookPro8*)

rmmod b43

modprobe b43 btcoex=0

modprobe btusb

;;

# FIXME

# Fix MacBook 2013-2015 (Air6/7&Pro11/12) BCM4360 ssb&wl conflict.

MacBookPro11* | MacBookPro12* | MacBookAir6* | MacBookAir7*)

rmmod b43

rmmod ssb

rmmod bcma

rmmod wl

modprobe wl

modprobe btusb

;;

for bt in $(lsusb -v | awk ' /Class:.E0/ { print $9 } '); do

chown 1002.1002 $bt && chmod 660 $bt

done

modprobe btusb

;;

esac

if [ -n "$BTUART_PORT" ]; then

set_property hal.bluetooth.uart $BTUART_PORT

chown bluetooth.bluetooth $BTUART_PORT

start btattach:-B$BTUART_PORT

log -t hciconfig -p i "`hciconfig`"

}

function init_hal_camera()

{

return

}

function init_hal_gps()

{

# TODO

return

}

function set_drm_mode()

{

case "$PRODUCT" in

ET1602*)

drm_mode=1366x768

;;

esac

[ -n "$drm_mode" ] && set_property debug.drm.mode.force $drm_mode

}

function init_uvesafb()

{

case "$PRODUCT" in

*Q550)

UVESA_MODE=${UVESA_MODE:-1280x800}

;;

ET2002*)

UVESA_MODE=${UVESA_MODE:-1600x900}

;;

T91*)

UVESA_MODE=${UVESA_MODE:-1024x600}

;;

VirtualBox*|Bochs*)

UVESA_MODE=${UVESA_MODE:-1024x768}

;;

esac

[ "$HWACCEL" = "0" ] && bpp=16 || bpp=32

modprobe uvesafb mode_option=${UVESA_MODE:-800x600}-$bpp ${UVESA_OPTION:-mtrr=3 scroll=redraw}

}

function init_hal_gralloc()

{

case "$(cat /proc/fb | head -1)" in

*virtiodrmfb)

#set_property ro.hardware.hwcomposer drm

0*inteldrmfb|0*radeondrmfb|0*nouveaufb|0*svgadrmfb)

set_property ro.hardware.gralloc drm

set_drm_mode

;;

"")

init_uvesafb

0*)

# FIXME: software rendering failed to pass the SetupWizard

set_property ro.setupwizard.mode DISABLED

;;

esac

[ -n "$DEBUG" ] && set_property debug.egl.trace error

}

function init_hal_hwcomposer()

{

# TODO

return

}

function init_hal_lights()

{

chown 1000.1000 /sys/class/backlight/*/brightness

}

function init_hal_power()

{

for p in /sys/class/rtc/*; do

echo disabled > $p/device/power/wakeup

done

# TODO

case "$PRODUCT" in

;;

esac

}

function init_hal_sensors()

{

local hal_sensors=kbd

case "$(cat $DMIPATH/uevent)" in

*Lucid-MWE*)

set_property ro.ignore_atkbd 1

hal_sensors=hdaps

;;

*ICONIA*W5*)

hal_sensors=w500

;;

*S10-3t*)

hal_sensors=s103t

;;

*Inagua*)

#setkeycodes 0x62 29

#setkeycodes 0x74 56

set_property ro.ignore_atkbd 1

set_property hal.sensors.kbd.type 2

;;

*TEGA*|*2010:svnIntel:*)

set_property ro.ignore_atkbd 1

set_property hal.sensors.kbd.type 1

io_switch 0x0 0x1

setkeycodes 0x6d 125

;;

*DLI*)

set_property ro.ignore_atkbd 1

set_property hal.sensors.kbd.type 1

setkeycodes 0x64 1

setkeycodes 0x65 172

setkeycodes 0x66 120

setkeycodes 0x67 116

setkeycodes 0x68 114

setkeycodes 0x69 115

setkeycodes 0x6c 114

setkeycodes 0x6d 115

;;

*tx2*)

setkeycodes 0xb1 138

setkeycodes 0x8a 152

set_property hal.sensors.kbd.type 6

set_property poweroff.doubleclick 0

set_property qemu.hw.mainkeys 1

;;

*MS-N0E1*)

set_property ro.ignore_atkbd 1

set_property poweroff.doubleclick 0

setkeycodes 0xa5 125

setkeycodes 0xa7 1

setkeycodes 0xe3 142

;;

*Aspire1*25*)

modprobe lis3lv02d_i2c

hal_sensors=hdaps

echo -n "enabled" > /sys/class/thermal/thermal_zone0/mode

;;

*ThinkPad*Tablet*)

modprobe hdaps

hal_sensors=hdaps

;;

*HPPaviliong*)

hal_sensors=hdaps

;;

*i7Stylus*)

set_property hal.sensors.iio.accel.matrix 1,0,0,0,-1,0,0,0,-1

;;

esac

# has iio sensor-hub?

if [ -n "`ls /sys/bus/iio/devices/iio:device* 2> /dev/null`" ]; then

busybox chown -R 1000.1000 /sys/bus/iio/devices/iio:device*/

lsmod | grep -q hid_sensor_accel_3d && hal_sensors=hsb || hal_sensors=iio

set_property ro.hardware.sensors $hal_sensors

}

function create_pointercal()

{

if [ ! -e /data/misc/tscal/pointercal ]; then

mkdir -p /data/misc/tscal

touch /data/misc/tscal/pointercal

chown 1000.1000 /data/misc/tscal /data/misc/tscal/*

chmod 775 /data/misc/tscal

chmod 664 /data/misc/tscal/pointercal

}

function init_tscal()

{

case "$PRODUCT" in

ST70416-6*)

modprobe gslx680_ts_acpi

T91|T101|ET2002|74499FU|945GSE-ITE8712|CF-19[CDYFGKLP]*)

create_pointercal

return

;;

esac

for usbts in $(lsusb | awk '{ print $6 }'); do

case "$usbts" in

0596:0001|0eef:0001)

create_pointercal

return

;;

esac

done

}

function init_ril()

{

case "$(cat $DMIPATH/uevent)" in

*TEGA*|*2010:svnIntel:*|*Lucid-MWE*)

set_property rild.libpath /system/lib/libhuaweigeneric-ril.so

set_property rild.libargs "-d /dev/ttyUSB2 -v /dev/ttyUSB1"

;;

esac

}

function init_cpu_governor()

{

governor=$(getprop cpu.governor)

[ $governor ] && {

for cpu in $(ls -d /sys/devices/system/cpu/cpu?); do

echo $governor > $cpu/cpufreq/scaling_governor || return 1

done

}

function do_init()

{

init_misc

init_hal_audio

init_hal_bluetooth

init_hal_camera

init_hal_gps

init_hal_gralloc

init_hal_hwcomposer

init_hal_lights

init_hal_power

init_hal_sensors

init_tscal

init_ril

post_init

}

function do_netconsole()

{

modprobe netconsole netconsole="@/,@$(getprop dhcp.eth0.gateway)/"

}

function do_bootcomplete()

{

init_cpu_governor

[ -z "$(getprop persist.sys.root_access)" ] && setprop persist.sys.root_access 3

# FIXME: autosleep works better on i965?

[ "$(getprop debug.mesa.driver)" = "i965" ] && setprop debug.autosleep 1

lsmod | grep -e brcmfmac && setprop wlan.no-unload-driver 1

case "$PRODUCT" in

1866???|1867???|1869???) # ThinkPad X41 Tablet

start tablet-mode

start wacom-input

setkeycodes 0x6d 115

setkeycodes 0x6e 114

setkeycodes 0x69 28

setkeycodes 0x6b 158

setkeycodes 0x68 172

setkeycodes 0x6c 127

setkeycodes 0x67 217

;;

6363???|6364???|6366???) # ThinkPad X60 Tablet

7762???|7763???|7767???) # ThinkPad X61 Tablet

start tablet-mode

start wacom-input

setkeycodes 0x6d 115

setkeycodes 0x6e 114

setkeycodes 0x69 28

setkeycodes 0x6b 158

setkeycodes 0x68 172

setkeycodes 0x6c 127

setkeycodes 0x67 217

;;

7448???|7449???|7450???|7453???) # ThinkPad X200 Tablet

start tablet-mode

start wacom-input

setkeycodes 0xe012 158

setkeycodes 0x66 172

setkeycodes 0x6b 127

;;

esac

#[ -d /proc/asound/card0 ] || modprobe snd-dummy

for c in $(grep '[.*]' /proc/asound/cards | awk '{print $1}'); do

f=/system/etc/alsa/$(cat /proc/asound/card$c/id).state

if [ -e $f ]; then

alsa_ctl -f $f restore $c

else

alsa_ctl init $c

alsa_amixer -c $c set Master on

alsa_amixer -c $c set Master 100%

alsa_amixer -c $c set Headphone on

alsa_amixer -c $c set Headphone 100%

alsa_amixer -c $c set Speaker 100%

alsa_amixer -c $c set Capture 100%

alsa_amixer -c $c set Capture cap

alsa_amixer -c $c set PCM 100 unmute

alsa_amixer -c $c set SPO unmute

alsa_amixer -c $c set 'Mic Boost' 3

alsa_amixer -c $c set 'Internal Mic Boost' 3

done

}

function do_hci()

{

local hci=`hciconfig | grep ^hci | cut -d: -f1`

local btd="`getprop init.svc.bluetoothd`"

log -t bluetoothd -p i "$btd ($hci)"

if [ -n "`getprop hal.bluetooth.uart`" ]; then

[ "`getprop init.svc.bluetoothd`" = "running" ] && hciconfig $hci up

}

PATH=/sbin:/system/bin:/system/xbin

DMIPATH=/sys/class/dmi/id

BOARD=$(cat $DMIPATH/board_name)

PRODUCT=$(cat $DMIPATH/product_name)

# import cmdline variables

for c in `cat /proc/cmdline`; do

case $c in

*.*=*)

;;

*=*)

eval $c

if [ -z "$1" ]; then

case $c in

HWACCEL=*)

set_property debug.egl.hw $HWACCEL

;;

DEBUG=*)

[ -n "$DEBUG" ] && set_property debug.logcat 1

;;

esac

;;

esac

done

[ -n "$DEBUG" ] && set -x || exec &> /dev/null

# import the vendor specific script

hw_sh=/vendor/etc/init.sh

[ -e $hw_sh ] && source $hw_sh

# Note: /system/etc/init.sh will be called 4 times: [init, bootcomplete, hci, hci]

case "$1" in

netconsole)

[ -n "$DEBUG" ] && do_netconsole

;;

bootcomplete)

do_bootcomplete

# seem_init.sh is called for the second time

/system/xbin/quagga/sbin/seem_init.sh

;;

hci)

do_hci

# comment hci in device/generic/common/init.x86.rc, line 126

# do_hci is called for the second time

#if [ -f /data/test.txt ]; then

#/system/xbin/quagga/sbin/seem_init.sh

#fi

# do_hci is called for the first time

#touch /data/test.txt

;;

init|"")

# seem_init.sh is called for the first time

/system/xbin/quagga/sbin/seem_init.sh

do_init

;;

esac

return 0