怎么在linux上网络功能,Linux系统如何通过手机GPRS功能无线上网

首先，要有一台具备GPRS且带有modem功能的手机，以下以palm treo 650为例。本文引用地址：http://www.eepw.com.cn/article/201610/305772.htm

650是不带modem功能，要通过软件实现，下载 USB modem软件并安装在650上。该软件支持蓝牙和usb数据线两种模式!

下面首先看系统是否能检测到modemsudo wvdialconfEditing `/etc/wvdial.conf'.Scanning your serial ports for a modem.Modem Port Scan*1>: S0 S1 S2 S3WvModem*1>: Cannot get information for serial port.ttyACM0*1>: ATQ0 V1 E1 -- OKttyACM0*1>: ATQ0 V1 E1 Z -- OKttyACM0*1>: ATQ0 V1 E1 S0=0 -- OKttyACM0*1>: ATQ0 V1 E1 S0=0 C1 -- OKttyACM0*1>: ATQ0 V1 E1 S0=0 C1 D2 -- OKttyACM0*1>: ATQ0 V1 E1 S0=0 C1 D2 +FCLASS=0 -- OKttyACM0*1>: Modem Identifier: ATI -- ENZOttyACM0*1>: Speed 4800: AT -- OKttyACM0*1>: Speed 9600: AT -- OKttyACM0*1>: Speed 19200: AT -- OKttyACM0*1>: Speed 38400: AT -- OKttyACM0*1>: Speed 57600: AT -- OKttyACM0*1>: Speed 115200: AT -- OKttyACM0*1>: Speed 230400: AT -- OKttyACM0*1>: Speed 460800: AT -- OKttyACM0*1>: Max speed is 460800; that should be safe.ttyACM0*1>: ATQ0 V1 E1 S0=0 C1 D2 +FCLASS=0 -- OKFound an USB modem on /dev/ttyACM0.Modem configuration written to /etc/wvdial.conf.ttyACM0: Speed 460800; init ATQ0 V1 E1 S0=0 C1 D2 +FCLASS=0

如果出现以下信息则能检测modem且将配置自动写入 /etc/wvdial.conf文件。你modem的设备文件为/dev/ttyACM0

由于配置文件为普通拨号而建立，所以不适合grps拨号，要作以下修改[Dialer defaults]Init1 = at+cgdcont=1,ip,cmwapModem Type = USB ModemISDN = 0Phone = *99***1#Modem = /dev/ttyACM0Username = anyCarrier Check = noPassword = anyBaud = 460800

保存后，使用wvdial拨号sudo wvdial

使用超级用户操作，不然无法会提示设备忙，或更改用户权限。--> WvDial: Internet dialer version 1.60--> Cannot get information for serial port.--> Initializing modem.--> Sending: at+cgdcont=1,ip,cmwapat+cgdcont=1,ip,cmwapOK--> Modem initialized.--> Sending: ATDT*99***1#--> Waiting for carrier.ATDT*99***1#CONNECT~[7f]}#@!}![06]} }}!}$}%\}}} } } } }#}$@#}%}}$^[7f]o}'}}(}Q}+~--> Carrier detected. Waiting for prompt.~[7f]}#@!}![06]} }}!}$}%\}}} } } } }#}$@#}%}}$^[7f]o}'}}(}Q}+~--> PPP negotiation detected.--> Starting pppd at Sat Jan 19 10:56:20 2008--> Pid of pppd: 6967--> Using interface ppp0--> pppd: (m[07][08]hr[07][08]--> pppd: (m[07][08]hr[07][08]--> pppd: (m[07][08]hr[07][08]--> pppd: (m[07][08]hr[07][08]--> pppd: (m[07][08]hr[07][08]--> local IP address 10.216.91.90--> pppd: (m[07][08]hr[07][08]--> remote IP address 10.216.91.0--> pppd: (m[07][08]hr[07][08]