linux桌面启动需要ramdisk吗,PPC440 linux 启动问题(ramdisk, nfs)

最新推荐文章于 2022-08-26 15:09:43 发布

意呆呆

最新推荐文章于 2022-08-26 15:09:43 发布

阅读量241

点赞数

文章标签： linux桌面启动需要ramdisk吗

EVM440:/#bootm 0x4000000 - 0x1000000

## Booting kernel from Legacy Image at 04000000 ...

Image Name:

Linux-2.6.35

Image Type:

PowerPC Linux Kernel Image (gzip

compressed)

Data Size:

1804402 Bytes = 1.7 MiB

Load Address:

00000000

Entry Point:

00000000

Verifying Checksum ...

## Flattened Device Tree blob at 01000000

Booting using the fdt

blob at 0x1000000

Uncompressing Kernel

Image ... OK

Loading Device Tree to

007f9000, end 007ffb0b ... OK

,early_init_dt_scan_chosen(),

search "chosen", depth: 0, uname:

,early_init_dt_scan_chosen(),

search "chosen", depth: 1, uname: memory@0

,early_init_dt_scan_chosen(),

search "chosen", depth: 1, uname: memory@8d000000

,early_init_dt_scan_chosen(),

search "chosen", depth: 1, uname: aliases

,early_init_dt_scan_chosen(),

search "chosen", depth: 1, uname: chosen

Using Xilinx Virtex440 machine description

Only using first contiguous memory region

Linux version 2.6.35 (huali@scnam-work) (gcc version 4.5.1

(Sourcery G++ Lite 2010.09-55) ) #37 PREEMPT Wed Aug 10 16:37:34

CST 2011

Zone PFN ranges:

DMA 0x00000000 ->

0x00010000

Normal empty

Movable zone start PFN for each node

early_node_map[1] active PFN ranges

0x00000000 -> 0x00010000

MMU: Allocated 1088 bytes of context maps for 255

contexts

Built 1 zonelists in Zone order, mobility grouping on.

Total pages: 65024

Kernel command line: console=ttyS0

ip=192.168.1.218 root=/dev/nfs

nfsroot=192.168.1.18:/nfsroot/scnam_root rw

mtdparts=/plb@0/flash@fe000000:30M(blank),2M(u-boot)

PID hash table entries: 1024 (order: 0, 4096 bytes)

Dentry cache hash table entries: 32768 (order: 5, 131072

bytes)

Inode-cache hash table entries: 16384 (order: 4, 65536

bytes)

Memory: 256056k/262144k available (3468k kernel code, 6088k

reserved, 168k data, 127k bss, 164k init)

Kernel virtual memory layout:

* 0xfffdf000..0xfffff000

: fixmap

* 0xfde00000..0xfe000000

: consistent mem

* 0xfde00000..0xfde00000

: early ioremap

* 0xd1000000..0xfde00000

: vmalloc & ioremap

Hierarchical RCU implementation.

RCU-based detection of stalled

CPUs is disabled.

Verbose stalled-CPUs detection

is disabled.

NR_IRQS:512

clocksource: timebase mult[a00000] shift[22] registered

Console: colour dummy device 80x25

pid_max: default: 32768 minimum: 301

Mount-cache hash table entries: 512

NET: Registered protocol family 16

PCI: Probing PCI hardware

bio: create slab at

/plb@0/gpio@814c0000: gc->ngpio: 8

/plb@0/gpio@814c0000: registered as generic GPIO chip, base is

248

XGpio: /plb@0/gpio@814c0000: registered

/plb@0/gpio@814a0000: gc->ngpio: 8

/plb@0/gpio@814a0000: registered as generic GPIO chip, base is

240

XGpio: /plb@0/gpio@814a0000: registered

/plb@0/gpio@81480000: gc->ngpio: 5

/plb@0/gpio@81480000: registered as generic GPIO chip, base is

235

XGpio: /plb@0/gpio@81480000: registered

/plb@0/gpio@81460000: gc->ngpio: 5

/plb@0/gpio@81460000: registered as generic GPIO chip, base is

230

XGpio: /plb@0/gpio@81460000: registered

/plb@0/gpio@81440000: gc->ngpio: 2

/plb@0/gpio@81440000: registered as generic GPIO chip, base is

228

XGpio: /plb@0/gpio@81440000: registered

/plb@0/gpio@81420000: gc->ngpio: 3

/plb@0/gpio@81420000: registered as generic GPIO chip, base is

225

XGpio: /plb@0/gpio@81420000: registered

/plb@0/gpio@81400000: gc->ngpio: 7

/plb@0/gpio@81400000: registered as generic GPIO chip, base is

218

XGpio: /plb@0/gpio@81400000: registered

vgaarb: loaded

Switching to clocksource timebase

NET: Registered protocol family 2

IP route cache hash table entries: 2048 (order: 1, 8192

bytes)

TCP established hash table entries: 8192 (order: 4, 65536

bytes)

TCP bind hash table entries: 8192 (order: 3, 32768

bytes)

TCP: Hash tables configured (established 8192 bind 8192)

TCP reno registered

UDP hash table entries: 256 (order: 0, 4096 bytes)

UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

NET: Registered protocol family 1

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

RPC: Registered tcp NFSv4.1 backchannel transport

module.

msgmni has been set to 500

io scheduler noop registered

io scheduler deadline registered

io scheduler cfq registered (default)

Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled

83e20000.serial: ttyS0 at MMIO 0x83e21003 (irq = 16) is a

16550

console [ttyS0] enabled

83e00000.serial: ttyS1 at MMIO 0x83e01003 (irq = 17) is a

16550

brd: module loaded

loop: module loaded

Device Tree Probing 'ethernet'

xilinx_lltemac 89780000.ethernet: MAC address is now

0: a:35:f2:c9: 0

xilinx_lltemac 89780000.ethernet: XLlTemac: using DMA

mode.

XLlTemac: DCR address: 0x80

XLlTemac: buffer descriptor size: 32768 (0x8000)

XLlTemac: Allocating DMA descriptors with kmalloc

XLlTemac: (buffer_descriptor_init) phy: 0xf970000, virt:

0xcf970000, size: 0x8000

XTemac: PHY detected at address 7.

eth0: Dropping NETIF_F_SG since no checksum feature.

xilinx_lltemac 89780000.ethernet: eth0: Xilinx TEMAC at

0x89780000 mapped to 0xD103A000, irq=18

xilinx_ps2 86a00000.ps2: Device Tree Probing 'ps2'

xilinx_ps2 86a00000.ps2: Xilinx PS2 at 0x86A00000 mapped to

0xd103e000, irq=21

xilinx_ps2 86a01000.ps2: Device Tree Probing 'ps2'

xilinx_ps2 86a01000.ps2: Xilinx PS2 at 0x86A01000 mapped to

0xd1052000, irq=22

mice: PS/2 mouse device common for all mice

TCP cubic registered

NET: Registered protocol family 17

eth0: XLlTemac: Options: 0x3fa

eth0: XLlTemac: allocating interrupt 20 for dma mode tx.

eth0: XLlTemac: allocating interrupt 19 for dma mode rx.

eth0: XLlTemac: speed set to 100Mb/s

eth0: XLlTemac: Send Threshold = 24, Receive Threshold =

eth0: XLlTemac: Send Wait bound = 254, Receive Wait bound =

254

atkbd serio0: keyboard reset failed on xilinxps2/serio at

86A00000

IP-Config: Guessing netmask 255.0.0.0

IP-Config: Complete:

device=eth0, addr=192.168.1.218, mask=255.0.0.0,

gw=255.255.255.255,

host=192.168.1.218, domain=, nis-domain=(none),

bootserver=255.255.255.255, rootserver=192.168.1.18,

rootpath=

atkbd serio1: keyboard reset failed on xilinxps2/serio at

86A01000

Looking up port of RPC 100003/2

on 192.168.1.18

Looking up port of RPC 100005/1

on 192.168.1.18

VFS: Mounted root (nfs filesystem) on device 0:11.

Freeing unused kernel memory: 164k init

INIT: version 2.86 booting

Welcome to

Wind River Linux

Starting udev: [ OK

]

FATAL: Module sctp not found.

Setting hostname localhost: [

OK ]

Setting up Logical Volume Management: /var/lock/lvm: mkdir failed: Permission denied

File-based locking

initialisation failed.

No volume groups

found

/etc/lvm/cache: mkdir

failed: Permission denied

[ OK ]

Checking filesystems

Checking all file systems.

[ OK ]

mount: according to mtab, rootfs is already mounted on /

Mounting local filesystems: mount: sysfs

already mounted or /sys busy

mount: according to mtab, /sys is already mounted on

/sys

can't create lock file /var/lock/mtab~1072: Permission denied

(use -n flag to override)

mount: unknown filesystem type 'debugfs'

[FAILED]

touch: cannot touch `/.autorelabel': Permission denied

cat: /var/lib/random-seed: Input/output error

chmod: changing permissions of `/var/lib/random-seed':

Operation not permitted

find: /var/run/quagga: Input/output error

find: /var/run/named: Input/output error

find: /var/run/mdadm: Input/output error

find: /var/run/sudo: Input/output error

/etc/rc.d/rc.sysinit: line 779: /var/run/utmp: Permission

denied

touch: setting times of `/var/log/wtmp': Permission

denied

chgrp: cannot access `/var/run/utmp': No such file or