1、DAL 中的代码更改为以下代码:
///
/// 分页获取数据列表
/// IsCount=0 返回记录总数,否则,返回记录集
/// 分页存储过程UP_GetRecordByPage
///
public DataSet GetList(int IsCount, int PageIndex, string strWhere)
{
//这里,为了不更改动软生成的代码太多部分,
//将原来的第一个参数PageSize 作为一个标志使用
//如果PageSize=0 ,即参数IsCount=0
//则为计算总数
//在传递给存储过程时,@IsCount=1
//否则,就接收到了PageSize 的值
string tableName = "LWord"; //排序表名***********
string colName = "LWordID"; //排序字段***********
//得到记录总数,如果保存统一的一个 PageSize,则可以从全局设置中直接取。
int PageSize = IsCount;
if (IsCount == 0) //如果IsCount =0 则,返回记录总数
{
SqlParameter[] parameters = {
new SqlParameter("@tblName", SqlDbType.VarChar, 255),
new SqlParameter("@fldName", SqlDbType.VarChar, 255),
new SqlParameter("@PageSize", SqlDbType.Int),
new SqlParameter("@PageIndex", SqlDbType.Int),
new SqlParameter("@IsReCount", SqlDbType.Bit),
new SqlParameter("@OrderType", SqlDbType.Bit),
new SqlParameter("@strWhere", SqlDbType.VarChar,1000),
};
parameters[0].Value = tableName;
parameters[1].Value = colName;
parameters[2].Value = PageSize;
parameters[3].Value = PageIndex;
parameters[4].Value = 1; //@IsReCount 1 (非)返回总数,否则,返回记录集
parameters[5].Value = 1;
parameters[6].Value = strWhere;
return DbHelperSQL.RunProcedure("UP_GetRecordByPage", parameters, "ds");
}
else
{
SqlParameter[] parameters = {
new SqlParameter("@tblName", SqlDbType.VarChar, 255),
new SqlParameter("@fldName", SqlDbType.VarChar, 255),
new SqlParameter("@PageSize", SqlDbType.Int),
new SqlParameter("@PageIndex", SqlDbType.Int),
new SqlParameter("@IsReCount", SqlDbType.Bit),
new SqlParameter("@OrderType", SqlDbType.Bit),
new SqlParameter("@strWhere", SqlDbType.VarChar,1000),
};
parameters[0].Value = tableName;
parameters[1].Value = colName;
parameters[2].Value = PageSize;
parameters[3].Value = PageIndex;
parameters[4].Value = 0; //@IsReCount (非)返回总数,返回记录集
parameters[5].Value = 1;
parameters[6].Value = strWhere;
return DbHelperSQL.RunProcedure("UP_GetRecordByPage", parameters, "ds");
}
}
2、在数据库中写如下存储过程:UP_GetRecordByPage(就用这个名字,因为 DAL 中都用的是这个。)
------------------------------------
--用途:支持任意排序的分页存储过程
--说明:
------------------------------------
CREATE PROCEDURE [dbo].[UP_GetRecordByPageOrder]
@tblName varchar(255), -- 表名
@fldName varchar(255), -- 显示字段名
@OrderfldName varchar(255), -- 排序字段名
@StatfldName varchar(255), -- 统计字段名
@PageSize int = 10, -- 页尺寸
@PageIndex int = 1, -- 页码
@IsReCount bit = 0, -- 返回记录总数, 非 0 值则返回
@OrderType bit = 0, -- 设置排序类型, 非 0 值则降序
@strWhere varchar(1000) = '' -- 查询条件 (注意: 不要加 where)
AS
declare @strSQL varchar(6000) -- 主语句
declare @strTmp varchar(100) -- 临时变量(查询条件过长时可能会出错,可修改100为1000)
declare @strOrder varchar(400) -- 排序类型
if @OrderType != 0
begin
set @strTmp = '
set @strOrder = ' order by [' + @OrderfldName +'] desc'
end
else
begin
set @strTmp = '>(select max'
set @strOrder = ' order by [' + @OrderfldName +'] asc'
end
set @strSQL = 'select top ' + str(@PageSize) + ' ' + @fldName + ' from ['
+ @tblName + '] where [' + @OrderfldName + ']' + @strTmp + '(['
+ @OrderfldName + ']) from (select top ' + str((@PageIndex-1)*@PageSize) + ' ['
+ @OrderfldName + '] from [' + @tblName + ']' + @strOrder + ') as tblTmp)'
+ @strOrder
if @strWhere != ''
set @strSQL = 'select top ' + str(@PageSize) + ' ' + @fldName + ' from ['
+ @tblName + '] where [' + @OrderfldName + ']' + @strTmp + '(['
+ @OrderfldName + ']) from (select top ' + str((@PageIndex-1)*@PageSize) + ' ['
+ @OrderfldName + '] from [' + @tblName + '] where ' + @strWhere + ' '
+ @strOrder + ') as tblTmp) and ' + @strWhere + ' ' + @strOrder
if @PageIndex = 1
begin
set @strTmp = ''
if @strWhere != ''
set @strTmp = ' where ' + @strWhere
set @strSQL = 'select top ' + str(@PageSize) + ' ' + @fldName + ' from ['
+ @tblName + ']' + @strTmp + ' ' + @strOrder
end
if @IsReCount != 0
set @strSQL = @strSQL+' select count(1) as Total from [' + @tblName + ']'
if @strWhere!=''
set @strSQL = @strSQL+' where ' + @strWhere
exec (@strSQL)
2,
------------------------------------
--用途:分页存储过程(对有主键的表效率极高)
--说明:
------------------------------------
CREATE PROCEDURE [dbo].[UP_GetRecordByPage]
@tblName varchar(255), -- 表名
@fldName varchar(255), -- 主键字段名
@PageSize int = 10, -- 页尺寸
@PageIndex int = 1, -- 页码
@IsReCount bit = 0, -- 返回记录总数, 非 0 值则返回
@OrderType bit = 0, -- 设置排序类型, 非 0 值则降序
@strWhere varchar(1000) = '' -- 查询条件 (注意: 不要加 where)
AS
declare @strSQL varchar(6000) -- 主语句
declare @strTmp varchar(100) -- 临时变量(查询条件过长时可能会出错,可修改100为1000)
declare @strOrder varchar(400) -- 排序类型
if @OrderType != 0
begin
set @strTmp = '
set @strOrder = ' order by [' + @fldName +'] desc'
end
else
begin
set @strTmp = '>(select max'
set @strOrder = ' order by [' + @fldName +'] asc'
end
set @strSQL = 'select top ' + str(@PageSize) + ' * from ['
+ @tblName + '] where [' + @fldName + ']' + @strTmp + '(['
+ @fldName + ']) from (select top ' + str((@PageIndex-1)*@PageSize) + ' ['
+ @fldName + '] from [' + @tblName + ']' + @strOrder + ') as tblTmp)'
+ @strOrder
if @strWhere != ''
set @strSQL = 'select top ' + str(@PageSize) + ' * from ['
+ @tblName + '] where [' + @fldName + ']' + @strTmp + '(['
+ @fldName + ']) from (select top ' + str((@PageIndex-1)*@PageSize) + ' ['
+ @fldName + '] from [' + @tblName + '] where ' + @strWhere + ' '
+ @strOrder + ') as tblTmp) and ' + @strWhere + ' ' + @strOrder
if @PageIndex = 1
begin
set @strTmp =''
if @strWhere != ''
set @strTmp = ' where ' + @strWhere
set @strSQL = 'select top ' + str(@PageSize) + ' * from ['
+ @tblName + ']' + @strTmp + ' ' + @strOrder
end
if @IsReCount != 0
set @strSQL = 'select count(*) as Total from [' + @tblName + ']'+' where ' + @strWhere
exec (@strSQL)