opkg linux 2.6内核,Openwrt VLAN Configure（2）

1      Scope of Document

This document describes vlan design on nodewrt2p

2      Requiremen

2.1     Function Requirement

Port0 be used for wan port, PORT1 PORT2 PORT3 PORT4 be used for lan port

2.2     Performance Requirement

NA

3      Hardware Overview

NA

4      Functional Description

4.1     Functional Block Diagram

NA

5      Porting

5.1     System configure

Reference: https://openwrt.org/docs/guide-user/network/vlan/switch_configuration

we can manual change target/linux/rampis/base-files/etc/board.d/02-network

Index: 02_network

===================================================================

--- 02_network    (revision 9)

+++ 02_network (revision 10)

@@ -188,8 +188,8 @@

wrtnode2r)

ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"

ucidef_add_switch "switch0" "1" "1"

-             ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t"

-             ucidef_add_switch_vlan "switch0" "2" "4 6t"

+            ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t"

+            ucidef_add_switch_vlan "switch0" "2" "0 6t"

;;

ur-336un)

ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"

so we have to two vlan network, one can be used to wan port , the other be used to lan port.