更新Cisco2960L固件

更新Cisco2960L固件

1.把更新包放到TFTP服务器目录下
2.连接交换机的电脑设置一个地址。

3.设置交换机上连接电脑的端口的地址，要在同一个网段

Xier-Server-SW02(config-if)# int g0/29
Xier-Server-SW02(config-if)#no switchport   ##不关闭交换端口，无法设置地址
Xier-Server-SW02(config-if)#ip address 172.16.100.3 255.255.255.0
Xier-Server-SW02(config-if)#do ping 172.16.100.2   ##ping一下电脑地址看看通不通 
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.100.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 3/3/3 ms
Xier-Server-SW02(config-if)#end

4.复制电脑上的更新包到交换机上

Xier-Server-SW02#copy tftp:c2960l-universalk9-mz.152-7.E4.bin flash:   ## 这里复制一下文件名

Address or name of remote host []? 172.16.100.2   ##输入一下电脑的地址
Destination filename [c2960l-universalk9-mz.152-7.E4.bin]?   ##直接回车
Accessing tftp://172.16.100.2/c2960l-universalk9-mz.152-7.E4.bin...
Loading c2960l-universalk9-mz.152-7.E4.bin from 172.16.100.2 (via GigabitEthernet0/29): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!    ##等待上传
[OK - 16243712 bytes]  

16243712 bytes copied in 162.663 secs (99861 bytes/sec)

Xier-Server-SW02#show flash:    ##查看一下上传的文件

Directory of flash:/

  770  -rwx    16243712  Nov 26 2021 09:12:03 +00:00  c2960l-universalk9-mz.152-7.E4.bin   ## 在这
  257  -rwx        2072  Nov 26 2021 07:45:15 +00:00  multiple-fs
  516  drwx        2048  Feb 27 2020 16:19:29 +00:00  c2960l-universalk9-mz.152-6.E2b
  749  drwx        2048  Feb 27 2020 16:19:29 +00:00  dc_profile_dir
  258  -rwx          34  Apr 15 2020 07:52:16 +00:00  pnp-tech-time
  515  -rwx       35978  Apr 15 2020 07:52:18 +00:00  pnp-tech-discovery-summary
  260  -rwx         916  Apr 15 2020 07:52:53 +00:00  vlan.dat
  782  -rwx        6690  Aug 29 2021 01:43:00 +00:00  config.text
  783  -rwx        1922  Aug 29 2021 01:43:00 +00:00  private-config.text
    2  drwx        2048   Mar 1 1993 00:00:02 +00:00  lost+found

244711424 bytes total (181399552 bytes free)

5.更新固件

Xier-Server-SW02#config t
Xier-Server-SW02(config)#boot system flash:c2960l-universalk9-mz.152-7.E4.bin  ##更新它
Xier-Server-SW02(config)#do wr   ##保存
Building configuration...
[OK]
Xier-Server-SW02(config)#do reload  
Proceed with reload? [confirm]

Xier-Server-SW02#sh ver
Cisco IOS Software, C2960L Software (C2960L-UNIVERSALK9-M), Version 15.2(7)E4, RELEASE SO  ##再看一下 更新好了