H3C交换机配置简单教程

H3C交换机配置简单教程

dis cu显示全部生效的配置，记得按空格显示出来全部
[h3]vlan 10
[h3]quit
[h3]int e1/0/9
port link-type access
[h3-Ethernet1/0/9]port access vlan 10

光口
[h3]int g1/0/26
[h3-GigabitEthernet1/0/26]port link-type trunk
[h3-GigabitEthernet1/0/26]port trunk permit vlan 10（all）
[h3-GigabitEthernet1/0/26]

为vlan 10添加ip
[h3]int Vlan-interface 10
[h3-Vlan-interface10]ip add 192.168.2.10 24

undo int vlan-int 10 （undo port link-type这句才行）删除vlan10
undo vlan all清空全部vlan，缺省的vlan能被删除

下面就是在创建语句前面加undo，华为的也是一样
undo port access vlan 清空access接口信息,
undo port trunk permit vlan all 清空trunk接口信息

在全局模式下输入命令：reset saved-configuration——清除已保存的配置
reboot——重启

首先要添加vlanIP才行设置用户并开启telnet

sys System View: return to User View with Ctrl+Z. [h3]local-user admin创建用户 [h3-luser-manage-admin]password simple 123456明文密码为123456 [h3-luser-manage-admin]service-type telnet开启telnet/*telnet server enable */ [h3-luser-manage-admin]authorization-attribute user-role level-3设置用户基本级别为3级 /* authori-attri lev 3*/ [h3-luser-manage-admin]quit

[h3]user-int vty 0 4 设置用户个数
[h3-line-vty0-4]authentication-mode scheme 进入用户vty链路
[h3-line-vty0-4]user-role level-3认证模式方案/user privileg level 3/
[h3-line-vty0-4]quit
其他详情请看H3C交换详细配置。
https://blog.csdn.net/m1585761297/article/details/80026382
批量配置端口
vlan 204
int range e 0/1 to e 0/24
port link-type access 或port link-type trunk port trunk permit vlan 10（all）
port access VLAN 204
开启poe
[H3C-Ethernet1/0/15]packet-filter
[H3C-Ethernet1/0/15]poe enable