SSM环境搭建(三)---springConfig.xml

完整项目地址:https://gitee.com/wdhcode/ssmEnvironment.git

一、导入约束

<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xmlns:context="http://www.springframework.org/schema/context"
       xmlns:aop="http://www.springframework.org/schema/aop"
       xmlns:tx="http://www.springframework.org/schema/tx"
       xsi:schemaLocation="http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop-4.3.xsd
		http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-3.2.xsd
		http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx-4.3.xsd
		http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context-4.3.xsd">

</beans>
(所有配置均在beans标签内部)

二、配置注解扫描

<!--开启注解的扫描,希望处理service和dao,controller不需要Spring框架去处理-->
    <context:component-scan base-package="com.wdh">
        <!--配置哪些注解不扫描-->
        <context:exclude-filter type="annotation" expression="org.springframework.stereotype.Controller" />
    </context:component-scan>

三、配置连接池

    <!-- 配置连接池 -->
    <context:property-placeholder location="classpath:config/DatabaseConfig/jdbcConfig.properties"/>
    <bean id="dataSource" class="com.mchange.v2.c3p0.ComboPooledDataSource">
        <property name="driverClass" value="${jdbc.driver}"/>
        <property name="jdbcUrl" value="${jdbc.url}"/>
        <property name="user" value="${jdbc.username}"/>
        <property name="password" value="${jdbc.password}"/>
    </bean>

四、spring和mybatis整合—sqlSession的创建

<!--配置MyBatis的整合: sqlSession的单个创建和批量创建-->
    <bean id="sqlSessionFactory" class="org.mybatis.spring.SqlSessionFactoryBean">
        <!-- 指定mybatis全局配置文件的位置 -->
        <property name="configLocation" value="classpath:config/DatabaseConfig/MybatisConfig.xml"></property>
        <property name="dataSource" ref="dataSource"></property>
        <!-- 指定mybatis,mapper文件的位置 -->
        <property name="mapperLocations" value="classpath:config/Mapper/*.xml"></property>
    </bean>

    <!-- 配置一个可以执行批量的sqlSession -->
    <bean id="sqlSession" class="org.mybatis.spring.SqlSessionTemplate">
        <constructor-arg name="sqlSessionFactory" ref="sqlSessionFactory"></constructor-arg>
        <constructor-arg name="executorType" value="BATCH"></constructor-arg>
    </bean>

五、配置扫描器,扫描所有dao接口

<!-- 配置扫描器,将mybatis接口的实现加入到ioc容器中 -->
    <bean class="org.mybatis.spring.mapper.MapperScannerConfigurer">
        <!--扫描所有dao接口的实现,加入到ioc容器中 -->
        <property name="basePackage" value="com.wdh.dao"></property>
    </bean>

六、事务的控制

<!-- ===============事务控制的配置 ================-->
    <bean id="transactionManager" class="org.springframework.jdbc.datasource.DataSourceTransactionManager">
        <!--控制住数据源  -->
        <property name="dataSource" ref="dataSource"></property>
    </bean>
    <!--开启基于注解的事务,使用xml配置形式的事务(必要主要的都是使用配置式)  -->
    <aop:config>
        <!-- 切入点表达式 -->
        <aop:pointcut expression="execution(* com.wdh.service..*(..))" id="txPoint"/>
        <!-- 配置事务增强 -->
        <aop:advisor advice-ref="txAdvice" pointcut-ref="txPoint"/>
    </aop:config>

    <!--配置事务增强,事务如何切入  -->
    <tx:advice id="txAdvice" transaction-manager="transactionManager">
        <tx:attributes>
            <!-- 所有方法都是事务方法 -->
            <tx:method name="*"/>
            <!--以find开始的所有方法  -->
            <tx:method name="find*" read-only="true"/>
        </tx:attributes>
    </tx:advice>

springConfig.xml完整代码

<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xmlns:context="http://www.springframework.org/schema/context"
       xmlns:aop="http://www.springframework.org/schema/aop"
       xmlns:tx="http://www.springframework.org/schema/tx"
       xsi:schemaLocation="http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop-4.3.xsd
		http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-3.2.xsd
		http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx-4.3.xsd
		http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context-4.3.xsd">



    <!--开启注解的扫描,希望处理service和dao,controller不需要Spring框架去处理-->
    <context:component-scan base-package="com.wdh">
        <!--配置哪些注解不扫描-->
        <context:exclude-filter type="annotation" expression="org.springframework.stereotype.Controller" />
    </context:component-scan>



    <!-- 配置连接池 -->
    <context:property-placeholder location="classpath:config/DatabaseConfig/jdbcConfig.properties"/>
    <bean id="dataSource" class="com.mchange.v2.c3p0.ComboPooledDataSource">
        <property name="driverClass" value="${jdbc.driver}"/>
        <property name="jdbcUrl" value="${jdbc.url}"/>
        <property name="user" value="${jdbc.username}"/>
        <property name="password" value="${jdbc.password}"/>
    </bean>

    <!--配置MyBatis的整合: sqlSession的单个创建和批量创建-->
    <bean id="sqlSessionFactory" class="org.mybatis.spring.SqlSessionFactoryBean">
        <!-- 指定mybatis全局配置文件的位置 -->
        <property name="configLocation" value="classpath:config/DatabaseConfig/MybatisConfig.xml"></property>
        <property name="dataSource" ref="dataSource"></property>
        <!-- 指定mybatis,mapper文件的位置 -->
        <property name="mapperLocations" value="classpath:config/Mapper/*.xml"></property>
    </bean>

    <!-- 配置一个可以执行批量的sqlSession -->
    <bean id="sqlSession" class="org.mybatis.spring.SqlSessionTemplate">
        <constructor-arg name="sqlSessionFactory" ref="sqlSessionFactory"></constructor-arg>
        <constructor-arg name="executorType" value="BATCH"></constructor-arg>
    </bean>

    <!-- 配置扫描器,将mybatis接口的实现加入到ioc容器中 -->
    <bean class="org.mybatis.spring.mapper.MapperScannerConfigurer">
        <!--扫描所有dao接口的实现,加入到ioc容器中 -->
        <property name="basePackage" value="com.wdh.dao"></property>
    </bean>


    <!-- ===============事务控制的配置 ================-->
    <bean id="transactionManager" class="org.springframework.jdbc.datasource.DataSourceTransactionManager">
        <!--控制住数据源  -->
        <property name="dataSource" ref="dataSource"></property>
    </bean>
    <!--开启基于注解的事务,使用xml配置形式的事务(必要主要的都是使用配置式)  -->
    <aop:config>
        <!-- 切入点表达式 -->
        <aop:pointcut expression="execution(* com.wdh.service..*(..))" id="txPoint"/>
        <!-- 配置事务增强 -->
        <aop:advisor advice-ref="txAdvice" pointcut-ref="txPoint"/>
    </aop:config>

    <!--配置事务增强,事务如何切入  -->
    <tx:advice id="txAdvice" transaction-manager="transactionManager">
        <tx:attributes>
            <!-- 所有方法都是事务方法 -->
            <tx:method name="*"/>
            <!--以find开始的所有方法  -->
            <tx:method name="find*" read-only="true"/>
        </tx:attributes>
    </tx:advice>


</beans>
  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
### 回答1: 好的,我可以帮您完成Spring配置文件(spring-config.xml)的编写。不过,在开始编写之前,请确保您已经了解了Spring框架和XML配置文件的基础知识。 以下是一个基本的Spring配置文件示例,您可以根据自己的需求进行修改: ```xml <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd"> <!-- 定义一个bean --> <bean id="myBean" class="com.example.MyBean"> <property name="name" value="John Doe" /> </bean> <!-- 定义另一个bean --> <bean id="anotherBean" class="com.example.AnotherBean"> <property name="myBean" ref="myBean" /> </bean> </beans> ``` 在这个示例中,我们定义了两个bean:`myBean`和`anotherBean`。`myBean`是一个类型为`com.example.MyBean`的bean,我们设置了一个属性`name`并给它赋值为`John Doe`。`anotherBean`是一个类型为`com.example.AnotherBean`的bean,它依赖于`myBean`,我们通过设置`myBean`属性的`ref`属性来实现依赖注入。 您可以根据自己的需求添加或修改这些bean,并根据需要添加其他元素,例如属性占位符、命名空间等等。完成后,将配置文件保存为`spring-config.xml`即可。 ### 回答2: 在继续完成spring-config.xml文件之前,首先需要明确这个文件的作用和功能。spring-config.xml文件是Spring框架中的配置文件之一,用于配置和管理应用程序的各种组件、依赖关系、属性以及其他一些重要的配置。 在继续完成该文件之前,我们需要先引入必要的命名空间: ```xml <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:aop="http://www.springframework.org/schema/aop" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop.xsd"> ``` 下面是继续完成spring-config.xml文件的一些建议内容: 1. 配置组件扫描: ```xml <context:component-scan base-package="com.example.app" /> ``` 2. 配置数据源: ```xml <bean id="dataSource" class="org.springframework.jdbc.datasource.DriverManagerDataSource"> <property name="driverClassName" value="com.mysql.jdbc.Driver" /> <property name="url" value="jdbc:mysql://localhost:3306/mydb" /> <property name="username" value="root" /> <property name="password" value="password" /> </bean> ``` 3. 配置事务管理器: ```xml <bean id="transactionManager" class="org.springframework.jdbc.datasource.DataSourceTransactionManager"> <property name="dataSource" ref="dataSource" /> </bean> ``` 4. 配置AOP切面: ```xml <aop:config> <aop:advisor advice-ref="myAdvice" pointcut="execution(* com.example.app.service.*.*(..))" /> </aop:config> ``` 5. 配置属性文件加载: ```xml <context:property-placeholder location="classpath:application.properties" /> ``` 这些仅仅是一些基本的配置,根据具体的应用程序需求,你可以继续添加其他的配置项。完成了spring-config.xml文件的编写后,将此配置文件与应用程序正确关联,使其在应用启动时生效。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值