Debian11编译EPICS ADAravis记录

USTC-lup

已于 2022-09-19 23:34:35 修改

阅读量621

点赞数

于 2022-09-19 21:51:57 首次发布

本文链接：https://blog.csdn.net/weixin_43767046/article/details/126934809

版权

EPICS 专栏收录该内容

34 篇文章 22 订阅

订阅专栏

openEuler下EPICS areaDetector的ADAravis包的编译https://blog.csdn.net/weixin_43767046/article/details/122042837

曾写过上面的文，又尝试了一下在Debian下这个流程：

准备：

Debian11的基础安装（我用的是在proxmox下使用现成的模板新建的debian11的CT），git抓包需要自己找渠道设置环境变量翻墙。

root权限下：

#改更新源
sed -i 's/ftp.debian.org/mirrors.ustc.edu.cn/g' /etc/apt/sources.list
sed -i 's/security.debian.org/mirrors.ustc.edu.cn\/debian-security/g' /etc/apt/sources.list
apt-get install git make gcc g++ #编译base需要

编译base：

adduser ioc
mkdir /half          #以合肥先进光源为例
chown -R ioc:ioc /half
cd /half
su ioc
mkdir epics
cd epics
############下载和编译epics base7#################################
git clone --recursive -b 7.0 https://git.launchpad.net/epics-base base-7.0
ln -s base-7.0 base
cd base
make

areaDetector需要的包：

EPICS Products Required for Building areaDetector

areaDetector requires EPICS base. R3.14.12.4 or higher, any 3.15 release should work.

areaDetector also requires asyn. The most recent release of asyn is recommended.

Each areaDetector detector module builds both a library and an EPICS IOC application. To build the library only EPICS base and asynDriver are required. To build the IOC application the synApps modules AUTOSAVE, BUSY, CALC, and SSCAN are required. If the CALC module is built with SNCSEQ support then SNCSEQ is also required. The most recent release of the synApps modules is recommended.

The DEVIOCSTATS and ALIVE modules are optional.

EPICS base, asyn and the synApps modules must be built before building areaDetector.

su下运行：

apt-get install libx11-dev libxext-dev wget re2c #编译areaDetector需要

######下载和修改synApps的脚本(当前最新版是6.2 --2022.9.19)#####

# 1. download the installer script
wget https://raw.githubusercontent.com/EPICS-synApps/support/master/assemble_synApps.sh

# 2. edit assemble_synApps.sh for your version of EPICS base and local directory paths

# 3. (optional) Specify the (new) directory name where synApps will be installed.
# This is the default:
# export SYNAPPS_DIR=synApps
# This directory will be created when assemble_synApps.sh is run.

# 4. download & install the synApps source files:

# 来自：GitHub - EPICS-synApps/support: APS BCDA synApps module: support

修改这个文件，根据上面的说明只保留了下面的模块，就能少下载些：

bash ./assemble_synApps.sh #一次可能不能把所有的包抓下来，多运行几次

之后进入support目录：

make release

make

apt-get install meson pkg-config glib-2.0 libxml2-dev #编译下面驱动需要：

之后安装aravis驱动，root权限下：

取ADGenICam — areaDetector 3-11-2-gf866e7e documentation 里的这部分即可：

cd /usr/local

git clone https://github.com/AravisProject/aravis

cd aravis/

meson build

cd build

ninja #Debian已经有，不用专门装

ninja install

编译后面的ADAravis需要在su下先运行下面两条命令：

cp /usr/lib/x86_64-linux-gnu/glib-2.0/include/glibconfig.h /usr/include/.

apt-get install libusb-1.0.0-dev

编译ADGenICam和ADAravis，普通用户权限运行：

cd /half/epics/synApps/support/areaDetector-R3-11/
git clone https://github.com/areaDetector/ADGenICam.git
cd ADGenICam/

make

cd ..

git clone https://github.com/areaDetector/ADAravis.git
cd ADAravis/
make