libusb在linux下的配置

记录自己的开发经验以便日后查看

libusb下载与编译

1.在官网下载libusb-1.0.23
2.解压tar -xvf libusb-1.0.23.tar.bz2
3../configure
4.make
5.sudo make install

在加载配置和编译的时候难免会遇到报错，执行下面代码下载

sudo apt-get install libusb-dev
sudo apt-get install libusb-1.0-0-dev
sudo apt-get install libudev-dev 

生成的头文件在/usr/local/include/libusb-1.0
生成的库在/usr/local/lib

写一个demo程序来测试

#include <stdio.h>
#include <sys/types.h>

#include <libusb.h>

static void print_devs(libusb_device **devs)
{
        libusb_device *dev;
        int i = 0;

        while ((dev = devs[i++]) != NULL) {
                struct libusb_device_descriptor desc;
                int r = libusb_get_device_descriptor(dev, &desc);
                if (r < 0) {
                        fprintf(stderr, "failed to get device descriptor");
                        return;
                }

                printf("%04x:%04x (bus %d, device %d)\n",
                        desc.idVendor, desc.idProduct,
                        libusb_get_bus_number(dev), libusb_get_device_address(dev));
        }
}

int main(void)
{
        libusb_device **devs;
        int r;
        ssize_t cnt;
        r = libusb_init(NULL);
        if (r < 0)
                return r;

        cnt = libusb_get_device_list(NULL, &devs);
        if (cnt < 0)
                return (int) cnt;

        print_devs(devs);
        libusb_free_device_list(devs, 1);

        libusb_exit(NULL);
        return 0;
}

在编译时候加入动态库与头文件gcc example.c -I /usr/local/include/libusb-1.0 -L /usr/local//lib -lusb-1.0