电子科技大学 格拉斯哥学院 2017级 袁巍铭
In the 21st century, due to the gradual reduction of energy, how to save energy has become a topic of increasing concern. However, I found that in the corridors of the community, as well as in many public areas, the lights do not save energy or even waste resources. Sometimes when they are not on at night, accidents will sometimes occur. For example, in our community corridors, voice-controlled and video-controlled lights usually do not work, which may not matter to young people, but for the elderly, when they go out at night cannot see the stairs is a very dangerours thing.
However, using the radar application that we learned last term, we can use radar to design the fluorescent lamp of radar-induced LED. This kind of fluorescent lamp mainly uses Doppler effect. This kind of lamp can be widely used in corridor, toilet, basement, garage, warehouse, monitoring and other energy-saving automatic lighting places. By independently developing the transmitting and receiving circuit of planar antenna, it can intelligently detect the surrounding electromagnetic environment and automatically adjust the working state. This is the biggest advantage of this kind of fluorescent lamp. Compared with the light control lamp and the film control lamp, the two kinds of lamp are more inaccurate for the recognition range. Ultra-low lighting power consumption at rest is generally 2-2.5 W, and it can be adjusted according to the environment. It will not switch according to the intensity of light or the size of sound, but according to the specific distance of the person or object sensed by radar to control the brightness of the light. This problem can be well solved by Doppler effect. For example, when a human body or a car moves in, it automatically senses full-load operation, 10-18 W (this power can also be adjusted according to the need). When it works for 2 to 60 seconds, it automatically changes the brightness according to the surrounding electromagnetic field, which also avoids wasting excess power. The fluorescent lamp can be input with wide voltage, and has over voltage, short circuit and open circuit protection, which well protects the fluorescent lamp.