跑linux

Starting kernel …

pass fdt address to linux.
Uncompressing Linux… done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.18.0-linux4sam_4.7-svn229 (linnf@csrsk-linux-svr1) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #V2.0.0-1 20160226
[ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine model: Atmel AT91SAM9G25-EK
[ 0.000000] cma: Reserved 16 MiB at 0x22c00000
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] AT91: Detected soc type: at91sam9x5
[ 0.000000] AT91: Detected soc subtype: at91sam9g25
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs ubi.mtd=8 ubi.mtd=9 ubi.mtd=10 mac_addr=B0-00-00 mac1_addr=B0-00-01 product_id=0x40000 enable232 console=ttyS2
[ 0.000000] setup mac addr = b0:c5:ca:b0: 0: 0
[ 0.000000] setup mac1 addr = b0:c5:ca:b0: 0: 1
[ 0.000000] init_product_id…0x40000
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Memory: 44104K/65536K available (2916K kernel code, 166K rwdata, 872K rodata, 152K init, 133K bss, 21432K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xc4800000 - 0xff000000 ( 936 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc03bb4e8 (3790 kB)
[ 0.000000] .init : 0xc03bc000 - 0xc03e2000 ( 152 kB)
[ 0.000000] .data : 0xc03e2000 - 0xc040ba60 ( 167 kB)
[ 0.000000] .bss : 0xc040ba60 - 0xc042ce94 ( 134 kB)
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] sched_clock: 32 bits at 128 Hz, resolution 7812500ns, wraps every 16777216000000000ns
[ 0.000000] Console: colour dummy device 80x30
[ 0.054687] Calibrating delay loop… 198.76 BogoMIPS (lpj=775168)
[ 0.054687] pid_max: default: 32768 minimum: 301
[ 0.062500] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.062500] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.062500] CPU: Testing write buffer coherency: ok
[ 0.062500] Setting up static identity map for 0x202c2398 - 0x202c2414
[ 0.062500] devtmpfs: initialized
[ 0.070312] pinctrl core: initialized pinctrl subsystem
[ 0.070312] regulator-dummy: no parameters
[ 0.101562] NET: Registered protocol family 16
[ 0.109375] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.109375] cpuidle: using governor ladder
[ 0.109375] cpuidle: using governor menu
[ 0.132812] gpio-at91 fffff400.gpio: at address fefff400
[ 0.140625] gpio-at91 fffff600.gpio: at address fefff600
[ 0.140625] gpio-at91 fffff800.gpio: at address fefff800
[ 0.140625] gpio-at91 fffffa00.gpio: at address fefffa00
[ 0.140625] pinctrl-at91 ahb:apb:pinctrl@fffff400: initialized AT91 pinctrl driver
[ 0.164062] at_hdmac ffffec00.dma-controller: Atmel AHB DMA Controller ( cpy slave sg-cpy ), 8 channels
[ 0.164062] at_hdmac ffffee00.dma-controller: Atmel AHB DMA Controller ( cpy slave sg-cpy ), 8 channels
[ 0.171875] SCSI subsystem initialized
[ 0.171875] usbcore: registered new interface driver usbfs
[ 0.171875] usbcore: registered new interface driver hub
[ 0.171875] usbcore: registered new device driver usb
[ 0.179687] at91_i2c f8014000.i2c: using dma1chan0 (tx) and dma1chan1 (rx) for DMA transfers
[ 0.234375] at91_i2c f8014000.i2c: AT91 i2c bus driver.
[ 0.242187] Switched to clocksource tcb_clksrc
[ 0.289062] NET: Registered protocol family 2
[ 0.289062] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.289062] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.289062] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.296875] TCP: reno registered
[ 0.296875] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.296875] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.296875] NET: Registered protocol family 1
[ 0.296875] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.296875] msgmni has been set to 118
[ 0.312500] io scheduler noop registered (default)
[ 0.312500] atmel_usart fffff200.serial: ttyS2 at MMIO 0xfffff200 (irq = 16, base_baud = 8333333) is a ATMEL_SERIAL
[ 0.664062] console [ttyS2] enabled
[ 0.679687] atmel_usart f801c000.serial: ttyS5 at MMIO 0xf801c000 (irq = 29, base_baud = 8333333) is a ATMEL_SERIAL
[ 0.687500] atmel_usart f8020000.serial: ttyS4 at MMIO 0xf8020000 (irq = 30, base_baud = 8333333) is a ATMEL_SERIAL
[ 0.695312] atmel_usart f8024000.serial: ttyS3 at MMIO 0xf8024000 (irq = 31, base_baud = 8333333) is a ATMEL_SERIAL
[ 0.703125] atmel_usart f8040000.serial: ttyS6 at MMIO 0xf8040000 (irq = 33, base_baud = 8333333) is a ATMEL_SERIAL
[ 0.718750] atmel_usart f8044000.serial: ttyS1 at MMIO 0xf8044000 (irq = 34, base_baud = 8333333) is a ATMEL_SERIAL
[ 0.726562] atmel_usart f8028000.serial: ttyS0 at MMIO 0xf8028000 (irq = 39, base_baud = 8333333) is a ATMEL_SERIAL
[ 0.742187] brd: module loaded
[ 0.757812] loop: module loaded
[ 0.781250] atmel_nand 40000000.nand: Use On Flash BBT
[ 0.789062] atmel_nand 40000000.nand: Using dma0chan0 for DMA transfers.
[ 0.796875] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xf1
[ 0.804687]