ART-Pi下载出错

ART-Pi在下载时出现以下错误

开始下载程序：2021-07-15 16:11:18
D:\RT-ThreadStudio\repo\Extract\Debugger_Support_Packages\STMicroelectronics\ST-LINK_Debugger\1.6.0\tools\bin>D:\RT-ThreadStudio\repo\Extract\Debugger_Support_Packages\STMicroelectronics\ST-LINK_Debugger\1.6.0\tools\bin\STM32_Programmer_CLI.exe -c port=SWD mode=NORMAL -d "F:\Rt_Workspace\ART-PI_BAIDUAI-main\Debug\rtthread.elf" -hardRst -s 
      -------------------------------------------------------------------
                       STM32CubeProgrammer v2.7.0-RC1                  
      -------------------------------------------------------------------
ST-LINK SN  : 0667FF554957886687092928
ST-LINK FW  : V2J35M26
Board       : --
Voltage     : 3.28V
SWD freq    : 4000 KHz
Connect mode: Normal
Reset mode  : Software reset
Device ID   : 0x450
Revision ID : Rev V
Device name : STM32H7xx
Flash size  : 128 KBytes
Device type : MCU
Device CPU  : Cortex-M7
Memory Programming ...
Opening and parsing file: rtthread.elf
  File          : rtthread.elf
  Size          : 738036 Bytes
  Address       : 0x90000000 
Erasing memory corresponding to segment 0:
Download in Progress:
Error: failed to download Segment[0]
Error: failed to download the File
Error: Unable to reset MCU!
RUNNING Program ... 
  Address:      : 0x8000000
Application is running
Start operation achieved successfully
执行完毕, 耗时：214ms.

原因

• 外部Flash的烧写算法出错

解决方法

• 重新选择外部Flash的烧写算法
• 路径位于/board/stldr下的ART-Pi_W25Q64.stldr文件