两个管道
#include <stdio.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <stdlib.h>
#include <fcntl.h>
#include <string.h>
int main() {
// 1.判断有名管道文件是否存在
int ret = access("fifo1", F_OK);
if(ret == -1) {
// 文件不存在
printf("管道不存在,创建对应的有名管道\n");
ret = mkfifo("fifo1", 0664);
if(ret == -1) {
perror("mkfifo");
exit(0);
}
}
ret = access("fifo2", F_OK);
if(ret == -1) {
// 文件不存在
printf("管道不存在,创建对应的有名管道\n");
ret = mkfifo("fifo2", 0664);
if(ret == -1) {
perror("mkfifo");
exit(0);
}
}
// 2.以只写的方式打开管道fifo1
int fdw = open("fifo1", O_WRONLY);
if(fdw == -1) {
perror("open");
exit(0);
}
printf("打开管道fifo1成功,等待写入...\n");
// 3.以只读的方式打开管道fifo2
int fdr = open("fifo2", O_RDONLY);
if(fdr == -1) {
perror("open");
exit(0);
}
printf("打开管道fifo2成功,等待读取...\n");
char buf[128];
// 4.循环的写读数据
while(1) {
memset(buf, 0, 128);
// 获取标准输入的数据
fgets(buf, 128, stdin);
// 写数据
ret = write(fdw, buf, strlen(buf));
if(ret == -1) {
perror("write");
exit(0);
}
// 5.读管道数据
memset(buf, 0, 128);//清空buf
ret = read(fdr, buf, 128);
if(ret <= 0) {
perror("read");
break;
}
printf("buf: %s\n", buf);
}
// 6.关闭文件描述符
close(fdr);
close(fdw);
return 0;
}
#include <stdio.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <stdlib.h>
#include <fcntl.h>
#include <string.h>
int main() {
// 1.判断有名管道文件是否存在
int ret = access("fifo1", F_OK);//F_OK 是否存在
if(ret == -1) {
// 文件不存在
printf("管道不存在,创建对应的有名管道\n");
ret = mkfifo("fifo1", 0664);
if(ret == -1) {
perror("mkfifo");
exit(0);
}
}
ret = access("fifo2", F_OK);
if(ret == -1) {
// 文件不存在
printf("管道不存在,创建对应的有名管道\n");
ret = mkfifo("fifo2", 0664);
if(ret == -1) {
perror("mkfifo");
exit(0);
}
}
// 2.以只读的方式打开管道fifo1
int fdr = open("fifo1", O_RDONLY);
if(fdr == -1) {
perror("open");
exit(0);
}
printf("打开管道fifo1成功,等待读取...\n");
// 3.以只写的方式打开管道fifo2
int fdw = open("fifo2", O_WRONLY);
if(fdw == -1) {
perror("open");
exit(0);
}
printf("打开管道fifo2成功,等待写入...\n");
char buf[128];
// 4.循环的读写数据
while(1) {
// 5.读管道数据
memset(buf, 0, 128);
ret = read(fdr, buf, 128);
if(ret <= 0) {
perror("read");
break;
}
printf("buf: %s\n", buf);
memset(buf, 0, 128);
// 获取标准输入的数据
fgets(buf, 128, stdin);
// 写数据
ret = write(fdw, buf, strlen(buf));
if(ret == -1) {
perror("write");
exit(0);
}
}
// 6.关闭文件描述符
close(fdr);
close(fdw);
return 0;
}