centos配置链路聚合

service主机配置

nmcli connection add type team con-name team0 ifname team0 autoconnect yes config ‘{“runter”:{“name”:“activebackup”}}’

nmcli connection add type team-slave con-name team0-1 ifname ens33 master team0
nmcli connection add type team-slave con-name team0-2 ifname ens37 master team0
nmcli connection modify team0 ipv4.addresses 192.168.10.1/24 ipv4.method manual

nmcli connection up team0
nmcli connection up team0-1
nmcli connection up team0-2

teamdctl team0 state

在desktop主机配置
mcli connection add type team con-name team0 ifname team0 autoconnect yes config ‘{“runter”:{“name”:“activebackup”}}’

nmcli connection add type team-slave con-name team0-1 ifname ens33 master team0
nmcli connection add type team-slave con-name team0-2 ifname ens37 master team0
nmcli connection modify team0 ipv4.addresses 192.168.10.10/24 ipv4.method manual

nmcli connection up team0
nmcli connection up team0-1
nmcli connection up team0-2

teamdctl team0 state

验证：最后service机ping通客户机192.168.10.10即可
关掉一个网卡也可以ping通的这就是链路聚合。