HUAWEI设备配置VLANIF (SVI,网关)
①创建vlan
[SW1]vlan 10(可以选择进行描述)
②进入对应的vlanif接口
interface Vlanif 10
③配置ip地址
[SW1-Vlanif10]ip address 10.1.1.254 24
[SW1-Vlanif10]display ip routing-table (查看路由表的状态)
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 4 Routes : 4
Destination/Mask Proto Pre Cost Flags NextHop Interface
10.1.1.0/24 Direct 0 0 D 10.1.1.254 Vlanif10
10.1.1.254/32 Direct 0 0 D 127.0.0.1 Vlanif10
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
[SW1-Vlanif10]display ip interface brief (查看三层接口的状态)
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 3
The number of interface that is DOWN in Physical is 1
The number of interface that is UP in Protocol is 2
The number of interface that is DOWN in Protocol is 2
Interface IP Address/Mask Physical Protocol
MEth0/0/1 unassigned down down
NULL0 unassigned up up(s)
Vlanif1 unassigned up down
Vlanif10 10.1.1.254/24 up up
[SW1-Vlanif10]