安信可WiFi模组WIFI-AI-M62做linux网卡

本文链接：https://blog.csdn.net/weixin_44925499/article/details/135481505

安信可WiFi模组WIFI-AI-M62做linux网卡

为了方便编译，重官网给的驱动源码拷贝wifi6_drv文件出来，后续在该文件里面做修改进行编译运行：

一、修改Makefile文件：

1.修改CONFIG_WPA3_SUPPORT配置，改为n
2.修改CONFIG_SUPPORT_WEXT_MODE配置，改为y
3.修改运行平台ARCH 为arm
4.修改编译工具CROSS_COMPILE为arm-linux-gnueabihf-（根据自己所用工具而定）
5.指定linux内核所在的路径KERNELDIR

BL_VERS_NUM=6.7.4.0

#
# WAITING FOR KCONFIG {
#
CONFIG_BL_PCIE ?= n
CONFIG_BL_SDIO ?= y
CONFIG_BL_USB ?= y
CONFIG_BL_BTUSB ?= n

# one driver support wifi BT for usb interface
CONFIG_WIFI_BT_USB_ONE_DRV ?= n
# user speicify the configure file location (tx_pwr.conf rf_para.conf)
CONFIG_CFG_FILE_LOCATION_USER_DEFINE ?= n
# configure usb use 2k rx buffer in driver
CONFIG_BL_USB_RX_BUF_2K ?=n

## mp cmds
CONFIG_BL_MP ?= y

## use combo fw for wifi/bt coexit
CONFIG_FW_COMBO ?=y

## FW bin mode or convert to array mode
CONFIG_BL_DNLD_FWBIN ?= y

## use cfg80211 wext standard ioctl to support wext mode
CONFIG_SUPPORT_WEXT_MODE ?= y

## support wpa3 compat if apply patch to kernel (<4.17) to support wpa3
CONFIG_WPA3_SUPPORT ?=n

export CONFIG_BL_MP
export CONFIG_FW_COMBO
export CONFIG_BL_DNLD_FWBIN

CONFIG_DEBUG_FS ?= n

#
# mesh feature support
CONFIG_MESH ?=n

#
# DEBUG OPTIONS
CONFIG_BL_UM_HELPER_DFLT ?= "/dini/dini_bin/bl_umh.sh"

#
# FW ARCH:
CONFIG_BL_SDM ?= n
CONFIG_BL_TL4 ?= n
CONFIG_BL_FW_RETRY ?= y
CONFIG_BL_FPGA ?= n
CONFIG_BL_RX_REORDER ?= y
CONFIG_BL_RX_DEFRAG ?= y
CONFIG_BL_BAND_5G ?= n

# IPC version
CONFIG_BL_OLD_IPC ?= n

# TX/RX profiling
CONFIG_BL_TRX_PROFILE ?= n

# Support of P2P DebugFS for enabling/disabling NoA and OppPS
CONFIG_BL_P2P_DEBUGFS ?= n

# Polling interrupt
CONFIG_BL_INT_POLLING ?= n

ifeq ($(CONFIG_DEBUG_FS),y)
CONFIG_BL_DEBUGFS ?= y
export CONFIG_BL_DEBUGFS ?= y
endif
#
# } // WAITING FOR KCONFIG
#
subdir-ccflags-$(CONFIG_MESH) += -DCONFIG_MESH

subdir-ccflags-$(CONFIG_BL_DEBUGFS) += -DCONFIG_BL_DEBUGFS
subdir-ccflags-$(CONFIG_BL_DEBUGFS) += -DCONFIG_BL_UM_HELPER_DFLT=\"$(CONFIG_BL_UM_HELPER_DFLT)\"
subdir-ccflags-$(CONFIG_BL_P2P_DEBUGFS) += -DCONFIG_BL_P2P_DEBUGFS

# FW VARS
subdir-ccflags-y += -DNX_VIRT_DEV_MAX=2
subdir-ccflags-y += -DNX_REMOTE_STA_MAX=4
subdir-ccflags-y += -DNX_MU_GROUP_MAX=62
subdir-ccflags-y += -DNX_TXDESC_CNT=64
subdir-ccflags-y += -DNX_TX_MAX_RATES=4
subdir-ccflags-y += -DNX_CHAN_CTXT_CNT=3
subdir-ccflags-y += -DCONFIG_BL_FULLMAC
subdir-ccflags-y += -DDEBUG

# FW ARCH:
subdir-ccflags-$(CONFIG_BL_SDM) += -DCONFIG_BL_SDM
subdir-ccflags-$(CONFIG_BL_TL4) += -DCONFIG_BL_TL4
subdir-ccflags-$(CONFIG_BL_OLD_IPC) += -DCONFIG_BL_OLD_IPC
subdir-ccflags-$(CONFIG_BL_FW_RETRY) += -DBL_FW_RETRY
subdir-ccflags-$(CONFIG_BL_RX_REORDER) += -DBL_RX_REORDER
subdir-ccflags-$(CONFIG_BL_RX_DEFRAG)  += -DBL_RX_DEFRAG
subdir-ccflags-$(CONFIG_BL_FPGA) += -DBL_FPGA
subdir-ccflags-$(CONFIG_BL_BAND_5G) += -DBL_BAND_5G
subdir-ccflags-$(CONFIG_BL_TRX_PROFILE) += -DBL_TRX_PROFILE

# driver configure
subdir-ccflags-$(CONFIG_BL_DNLD_FWBIN) += -DCONFIG_BL_DNLD_FWBIN
subdir-ccflags-$(CONFIG_BL_MP) += -DCONFIG_BL_MP
subdir-ccflags-$(CONFIG_FW_COMBO) += -DCONFIG_FW_COMBO
subdir-ccflags-$(CONFIG_SUPPORT_WEXT_MODE) += -DCONFIG_SUPPORT_WEXT_MODE
subdir-ccflags-$(CONFIG_BL_USB_RX_BUF_2K) += -DBL_USB_RX_BUF_2K

subdir-ccflags-$(CONFIG_CFG_FILE_LOCATION_USER_DEFINE) += -DCFG_FILE_LOCATION_USER_DEFINE
subdir-ccflags-$(CONFIG_BL_INT_POLLING) += -DBL_INT_POLLING

subdir-ccflags-$(CONFIG_WPA3_SUPPORT) += -DBL_WPA3_COMPAT

# BT USB driver:
ifeq ($(CONFIG_WIFI_BT_USB_ONE_DRV),y)
export CONFIG_BL_BTUSB = y
export CONFIG_WIFI_BT_USB_ONE_DRV = y
endif
ifeq ($(CONFIG_BL_PCIE),y)
obj-m  += pcie/
endif
ifeq ($(CONFIG_BL_SDIO),y)
obj-m  += sdio/
endif
ifeq ($(CONFIG_BL_USB),y)
obj-m   += usb/
endif
#obj-$(CONFIG_BL_PCIE)  += pcie/
#obj-$(CONFIG_BL_SDIO)  += sdio/
#obj-$(CONFIG_BL_USB)   += usb/

ifeq ($(CONFIG_BL_BTUSB),y)
export CONFIG_BL_BTUSB = y
obj-m += btusb/
endif
KBUILD_CFLAGS += -w

all: modules

ARCH := arm
CROSS_COMPILE = arm-linux-gnueabihf-
#KERNELDIR = /lib/modules/`uname -r`/build
KERNELDIR = /home/kf2/share/gateway/linux/build

modules clean:
	@$(PWD)/mklink.sh
#	$(MAKE) -C $(KERNELDIR) O=$(KBUILDDIR) M=$(PWD) $@
	$(MAKE) -C $(KERNELDIR) O=$(KBUILDDIR) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) M=$(PWD) $@
	@$(PWD)/mklink.sh clean