文章目录
前言
学习RYU历程
提示：参考自《RYU入门》
本篇会随着本人进度积极更新和修改
一、OpenFlow交换机
SDN结构中所使用的交换机
功能
1.将收到的封包修改或转送至指定端口
2.Packet-in（将封包转送至Controller的动作），得到端口相关数据和所连接的host的MAC地址
3.Packet-Out（将来自Controller的封包转送至指定端口），对于已经存在记录中的host：使用Packet-Out功能转送至先前对应端口，若尚未存在，Flooding到所有端口
1.RYU中交换机实现的源码
OpenFlow协议为1.3
代码如下：
from ryu.base import app_manager
from ryu.controller import ofp_event
from ryu.controller.handler import CONFIG_DISPATCHER, MAIN_DISPATCHER
from ryu.controller.handler import set_ev_cls
from ryu.ofproto import ofproto_v1_3
from ryu.lib.packet import packet
from ryu.lib.packet import ethernet
from ryu.lib.packet import ether_types
class SimpleSwitch13(app_manager.RyuApp):
OFP_VERSIONS = [ofproto_v1_3.OFP_VERSION]
def __init__(self, *args, **kwargs):
super(SimpleSwitch13, self).__init__(*args, **kwargs)
self.mac_to_port = {}
@set_ev_cls(ofp_event.EventOFPSwitchFeatures, CONFIG_DISPATCHER)
def switch_features_handler(self, ev):
datapath = ev.msg.datapath
ofproto = datapath.ofproto
parser = datapath.ofproto_parser
# install table-miss flow entry
#
# We specify NO BUFFER to max_len of the output action due to
# OVS bug. At this moment, if we specify a lesser number, e.g.,
# 128, OVS will send Packet-In with invalid buffer_id and
# truncated packet data. In that case, we cannot output packets
# correctly. The bug has been fixed in OVS v2.1.0.
match = parser.OFPMatch()
actions = [parser.OFPActionOutput(ofproto.OFPP_CONTROLLER,
ofproto.OFPCML_NO_BUFFER)]
self.add_flow(datapath, 0, match, actions)
def add_flow(self, datapath, priority, match, actions, buffer_id=None):
ofproto = datapath.ofproto
parser = datapath.ofproto_parser
inst = [parser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,
actions)]
if buffer_id:
mod = parser.OFPFlowMod(datapath=datapath, buffer_id=buffer_id,
priority=priority, match=match,
instructions=inst)
else:
mod = parser.OFPFlowMod(datapath=datapath, priority=priority,
match=match, instructions=inst)
datapath.send_msg(mod)
@set_ev_cls(ofp_event.EventOFPPacketIn, MAIN_DISPATCHER)
def _packet_in_handler(self, ev):
# If you hit this you might want to increase
# the "miss_send_length" of your switch
if ev.msg.msg_len < ev.msg.total_len:
self.logger.debug("packet truncated: only %s of %s bytes",
ev.msg.msg_len, ev.msg.total_len)
msg = ev.msg
datapath = msg.datapath
ofproto = datapath.ofproto
parser = datapath.ofproto_parser
in_port = msg.match['in_port']
pkt = packet.Packet(msg.data)
eth = pkt.get_protocols(ethernet.ethernet)[0]
if eth.ethertype == ether_types.ETH_TYPE_LLDP:
# ignore lldp packet
return
dst = eth.dst
src = eth.src
dpid = datapath.id
self.mac_to_port.setdefault(dpid, {})
self.logger.info("packet in %s %s %s %s", dpid, src, dst, in_port)
# learn a mac address to avoid FLOOD next time.
self.mac_to_port[dpid][src] = in_port
if dst in self.mac_to_port[dpid]:
out_port = self.mac_to_port[dpid][dst]
else:
out_port = ofproto.OFPP_FLOOD
actions = [parser.OFPActionOutput(out_port)]
# install a flow to avoid packet_in next time
if out_port != ofproto.OFPP_FLOOD:
match = parser.OFPMatch(in_port=in_port, eth_dst=dst, eth_src=src)
# verify if we have a valid buffer_id, if yes avoid to send both
# flow_mod & packet_out
if msg.buffer_id != ofproto.OFP_NO_BUFFER:
self.add_flow(datapath, 1, match, actions, msg.buffer_id)
return
else:
self.add_flow(datapath, 1, match, actions)
data = None
if msg.buffer_id == ofproto.OFP_NO_BUFFER:
data = msg.data
out = parser.OFPPacketOut(datapath=datapath, buffer_id=msg.buffer_id,
in_port=in_port, actions=actions, data=data)
datapath.send_msg(out)
2.初始化
class SimpleSwitch13(app_manager.RyuApp):
OFP_VERSIONS = [ofproto_v1_3.OFP_VERSION]
def __init__(self, *args, **kwargs):
super(SimpleSwitch13, self).__init__(*args, **kwargs)
self.mac_to_port = {}
继承自ryu.base.app_manager.RyuApp。
OFP_VERSIONS指定为OpenFlow1.3.
定义MAC地址表的mac_to_port，这里是一个字典。
3.事件管理
@set_ev_cls(ofp_event.EventOFPSwitchFeatures, CONFIG_DISPATCHER)
def switch_features_handler(self, ev):
datapath = ev.msg.datapath
ofproto = datapath.ofproto
parser = datapath.ofproto_parser
对于Ryu来说，接收到任何一个OpenFlow讯息即产生一个相对应的事件，并使用一个set_ev_cls修饰函数，它指定事件类别和交换机状态。
如Packet-in讯息产生的事件为EventOFPPacketin。至于交换机的状态，这里的CONFIG_DISPATCHER说明接收SwitchFeatures讯息。接收到SwitchFeatures讯息后就会在Flow table中新增Table-miss Flow Entry来为接收Packet-in讯息做准备。
ev.msg储存对应事件的OpenFlow讯息类别实体，本例则是ryu.controller.ofproto_v1_3_parser.OFPSwitchFeatures。
parser是一个解析器获取match等信息。
4.Datapath
msg.datapath储存OpenFlow交换机ryu.controller.controller.Datapath这个类别所对应的实体。
Datapath类别处理OpenFlow交换机的讯息如与交换机的通讯和触发接收讯息相关的事件。
Datapath有以下几个属性
Datapath中的send_msg(msg)方法发送OpenFlow讯息
注意：交换机不仅仅使用Switch features讯息，还使用事件处理取得新增Table-miss Flow Entry的时间点
5.Table-miss Flow Entry
match = parser.OFPMatch()
actions = [parser.OFPActionOutput(ofproto.OFPP_CONTROLLER,
ofproto.OFPCML_NO_BUFFER)]
self.add_flow(datapath, 0, match, actions)
Table-miss Flow Entry的优先权为最低的0。
此Entry可以math所有的封包。
此Entry的Instruction指定为output action,输出端口指向Controller，即封包没有match任何一个普通Flow Entry时，触发Packet-in。
空的match生成为了match所有封包。
actions生成为了转发到Controller端口。
执行add.flow()方法以发送Flow Mod讯息。
6.Packet-in
@set_ev_cls(ofp_event.EventOFPPacketIn, MAIN_DISPATCHER)
def _packet_in_handler(self, ev):
# If you hit this you might want to increase
# the "miss_send_length" of your switch
if ev.msg.msg_len < ev.msg.total_len:
self.logger.debug("packet truncated: only %s of %s bytes",
ev.msg.msg_len, ev.msg.total_len)
msg = ev.msg
datapath = msg.datapath
ofproto = datapath.ofproto
parser = datapath.ofproto_parser
OFPPackeIn经常使用的属性如下图
7.更新MAC地址表
in_port = msg.match['in_port']
pkt = packet.Packet(msg.data)
eth = pkt.get_protocols(ethernet.ethernet)[0]
if eth.ethertype == ether_types.ETH_TYPE_LLDP:
# ignore lldp packet
return
dst = eth.dst
src = eth.src
dpid = datapath.id
self.mac_to_port.setdefault(dpid, {})
self.logger.info("packet in %s %s %s %s", dpid, src, dst, in_port)
# learn a mac address to avoid FLOOD next time.
self.mac_to_port[dpid][src] = in_port
从match中得到接收端口的信息。
目的MAC地址和源MAC地址从接收到封包的Ethernet header中获得。
datapath.id标识OpenFlow交换机。
用目的MAC和源MAC更新MAC地址表。
8.判断转发封包的端口
if dst in self.mac_to_port[dpid]:
out_port = self.mac_to_port[dpid][dst]
else:
out_port = ofproto.OFPP_FLOOD
actions = [parser.OFPActionOutput(out_port)]
# install a flow to avoid packet_in next time
if out_port != ofproto.OFPP_FLOOD:
match = parser.OFPMatch(in_port=in_port, eth_dst=dst, eth_src=src)
# verify if we have a valid buffer_id, if yes avoid to send both
# flow_mod & packet_out
if msg.buffer_id != ofproto.OFP_NO_BUFFER:
self.add_flow(datapath, 1, match, actions, msg.buffer_id)
return
else:
self.add_flow(datapath, 1, match, actions)
目的MAC地址存在MAC地址表，则该端口号为输出。
若不存在MAC地址表，则Flooding。
找到目的MAC地址后，通过add_flow()在交换机的Flow table中新增
9.add_flow()
def add_flow(self, datapath, priority, match, actions, buffer_id=None):
ofproto = datapath.ofproto
parser = datapath.ofproto_parser
inst = [parser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,
actions)]
if buffer_id:
mod = parser.OFPFlowMod(datapath=datapath, buffer_id=buffer_id,
priority=priority, match=match,
instructions=inst)
else:
mod = parser.OFPFlowMod(datapath=datapath, priority=priority,
match=match, instructions=inst)
datapath.send_msg(mod)
match用来分辨目标封包。
实体inst用来处理封包。
OFPIT_APPLY_ACTIONS用来设定发生哪些action使用。
OFPFlowMod所产生的实体mod通过send_msg()发送给OpenFlow交换机
10.转发封包
data = None
if msg.buffer_id == ofproto.OFP_NO_BUFFER:
data = msg.data
out = parser.OFPPacketOut(datapath=datapath, buffer_id=msg.buffer_id,
in_port=in_port, actions=actions, data=data)
datapath.send_msg(out)
out为OFPPacketOut的实体。
datapath指定OpenFlow交换机对应的datapath实体。
buffer_id指定交换机上封包对应的缓冲区，若不使用缓冲区，指定为OFP_NO_BUFFER。
in_port指定接收封包的端口号，不使用则指定为OFP_CONTROLLER。
actions指定actions list。
data设定封包的binary data。用在buffer_id为OFP_NO_BUFFER的情况。若使用了OpenFlow交换机的缓冲区，也可以省略。
二、流量监控（Traffic Monitor）
1.源码
from operator import attrgetter
from ryu.app import simple_switch_13
from ryu.controller import ofp_event
from ryu.controller.handler import MAIN_DISPATCHER, DEAD_DISPATCHER
from ryu.controller.handler import set_ev_cls
from ryu.lib import hub
class SimpleMonitor13(simple_switch_13.SimpleSwitch13):
def __init__(self, *args, **kwargs):
super(SimpleMonitor13, self).__init__(*args, **kwargs)
self.datapaths = {}
self.monitor_thread = hub.spawn(self._monitor)
@set_ev_cls(ofp_event.EventOFPStateChange,
[MAIN_DISPATCHER, DEAD_DISPATCHER])
def _state_change_handler(self, ev):
datapath = ev.datapath
if ev.state == MAIN_DISPATCHER:
if datapath.id not in self.datapaths:
self.logger.debug('register datapath: %016x', datapath.id)
self.datapaths[datapath.id] = datapath
elif ev.state == DEAD_DISPATCHER:
if datapath.id in self.datapaths:
self.logger.debug('unregister datapath: %016x', datapath.id)
del self.datapaths[datapath.id]
def _monitor(self):
while True:
for dp in self.datapaths.values():
self._request_stats(dp)
hub.sleep(10)
def _request_stats(self, datapath):
self.logger.debug('send stats request: %016x', datapath.id)
ofproto = datapath.ofproto
parser = datapath.ofproto_parser
req = parser.OFPFlowStatsRequest(datapath)
datapath.send_msg(req)
req = parser.OFPPortStatsRequest(datapath, 0, ofproto.OFPP_ANY)
datapath.send_msg(req)
@set_ev_cls(ofp_event.EventOFPFlowStatsReply, MAIN_DISPATCHER)
def _flow_stats_reply_handler(self, ev):
body = ev.msg.body
self.logger.info('datapath '
'in-port eth-dst '
'out-port packets bytes')
self.logger.info('---------------- '
'-------- ----------------- '
'-------- -------- --------')
for stat in sorted([flow for flow in body if flow.priority == 1],
key=lambda flow: (flow.match['in_port'],
flow.match['eth_dst'])):
self.logger.info('%016x %8x %17s %8x %8d %8d',
ev.msg.datapath.id,
stat.match['in_port'], stat.match['eth_dst'],
stat.instructions[0].actions[0].port,
stat.packet_count, stat.byte_count)
@set_ev_cls(ofp_event.EventOFPPortStatsReply, MAIN_DISPATCHER)
def _port_stats_reply_handler(self, ev):
body = ev.msg.body
self.logger.info('datapath port '
'rx-pkts rx-bytes rx-error '
'tx-pkts tx-bytes tx-error')
self.logger.info('---------------- -------- '
'-------- -------- -------- '
'-------- -------- --------')
for stat in sorted(body, key=attrgetter('port_no')):
self.logger.info('%016x %8x %8d %8d %8d %8d %8d %8d',
ev.msg.datapath.id, stat.port_no,
stat.rx_packets, stat.rx_bytes, stat.rx_errors,
stat.tx_packets, stat.tx_bytes, stat.tx_errors)
继承自SimpleSwitch13,故没有转发相关的处理函数。
2.向注册的交换机请求统计信息
class SimpleMonitor13(simple_switch_13.SimpleSwitch13):
def __init__(self, *args, **kwargs):
super(SimpleMonitor13, self).__init__(*args, **kwargs)
self.datapaths = {}
self.monitor_thread = hub.spawn(self._monitor)
@set_ev_cls(ofp_event.EventOFPStateChange,
[MAIN_DISPATCHER, DEAD_DISPATCHER])
def _state_change_handler(self, ev):
datapath = ev.datapath
if ev.state == MAIN_DISPATCHER:
if datapath.id not in self.datapaths:
self.logger.debug('register datapath: %016x', datapath.id)
self.datapaths[datapath.id] = datapath
elif ev.state == DEAD_DISPATCHER:
if datapath.id in self.datapaths:
self.logger.debug('unregister datapath: %016x', datapath.id)
del self.datapaths[datapath.id]
def _monitor(self):
while True:
for dp in self.datapaths.values():
self._request_stats(dp)
hub.sleep(10)
使用hub.spawn()建立了线程，实际是使用了eventlet的green线程。
_monitor函数向交换机取得统计信息。
EventOFPStateChange被触发在Datapath状态改变时。
MAIN_DISPATCHER表示交换机已注册并别监视，DEAD_DISPATCHER表示交换机已从注册状态解除。
3.向注册的交换机请求统计信息
def _request_stats(self, datapath):
self.logger.debug('send stats request: %016x', datapath.id)
ofproto = datapath.ofproto
parser = datapath.ofproto_parser
req = parser.OFPFlowStatsRequest(datapath)
datapath.send_msg(req)
req = parser.OFPPortStatsRequest(datapath, 0, ofproto.OFPP_ANY)
datapath.send_msg(req)
_request_stats函数驱动OFPFlowStatsRequest和OFPPortStatsRequest向交换机发出请求信息；前者取得Flow Entry信息，后者取得端口相关信息。
4.接收交换机的Flow Entry回复信息
@set_ev_cls(ofp_event.EventOFPFlowStatsReply, MAIN_DISPATCHER)
def _flow_stats_reply_handler(self, ev):
body = ev.msg.body
self.logger.info('datapath '
'in-port eth-dst '
'out-port packets bytes')
self.logger.info('---------------- '
'-------- ----------------- '
'-------- -------- --------')
for stat in sorted([flow for flow in body if flow.priority == 1],
key=lambda flow: (flow.match['in_port'],
flow.match['eth_dst'])):
self.logger.info('%016x %8x %17s %8x %8d %8d',
ev.msg.datapath.id,
stat.match['in_port'], stat.match['eth_dst'],
stat.instructions[0].actions[0].port,
stat.packet_count, stat.byte_count)
body是一个储存Flow Entry信息的列表。
除Table-miss Flow以外的Flow Entry被选择回传，按接收端口号和目的MAC排序
5.接收交换机的端口回复信息
def _port_stats_reply_handler(self, ev):
body = ev.msg.body
self.logger.info('datapath port '
'rx-pkts rx-bytes rx-error '
'tx-pkts tx-bytes tx-error')
self.logger.info('---------------- -------- '
'-------- -------- -------- '
'-------- -------- --------')
for stat in sorted(body, key=attrgetter('port_no')):
self.logger.info('%016x %8x %8d %8d %8d %8d %8d %8d',
ev.msg.datapath.id, stat.port_no,
stat.rx_packets, stat.rx_bytes, stat.rx_errors,
stat.tx_packets, stat.tx_bytes, stat.tx_errors)
body是一个储存端口信息的列表
输出端口相关信息，依据端口号的排序列出接收的封包数量，接收位数量，接收错误数量，发送封包数量，发送位数，发送错误位数。
三、生成树（Spanning Tree）
生成树是为了防止在网络的拓扑中出现循环(loop)进而产生广播风暴的技术
STP是一种生成树，它会在网桥(交换机)间交换BPDU封包，分析及对比网桥之间的端口信息，决定那些端口可以转发，哪些不行
1.源码
from ryu.base import app_manager
from ryu.controller import ofp_event
from ryu.controller.handler import CONFIG_DISPATCHER, MAIN_DISPATCHER
from ryu.controller.handler import set_ev_cls
from ryu.ofproto import ofproto_v1_3
from ryu.lib import dpid as dpid_lib
from ryu.lib import stplib
from ryu.lib.packet import packet
from ryu.lib.packet import ethernet
from ryu.app import simple_switch_13
class SimpleSwitch13(simple_switch_13.SimpleSwitch13):
OFP_VERSIONS = [ofproto_v1_3.OFP_VERSION]
_CONTEXTS = {'stplib': stplib.Stp}
def __init__(self, *args, **kwargs):
super(SimpleSwitch13, self).__init__(*args, **kwargs)
self.mac_to_port = {}
self.stp = kwargs['stplib']
# Sample of stplib config.
# please refer to stplib.Stp.set_config() for details.
config = {dpid_lib.str_to_dpid('0000000000000001'):
{'bridge': {'priority': 0x8000}},
dpid_lib.str_to_dpid('0000000000000002'):
{'bridge': {'priority': 0x9000}},
dpid_lib.str_to_dpid('0000000000000003'):
{'bridge': {'priority': 0xa000}}}
self.stp.set_config(config)
def delete_flow(self, datapath):
ofproto = datapath.ofproto
parser = datapath.ofproto_parser
for dst in self.mac_to_port[datapath.id].keys():
match = parser.OFPMatch(eth_dst=dst)
mod = parser.OFPFlowMod(
datapath, command=ofproto.OFPFC_DELETE,
out_port=ofproto.OFPP_ANY, out_group=ofproto.OFPG_ANY,
priority=1, match=match)
datapath.send_msg(mod)
@set_ev_cls(stplib.EventPacketIn, MAIN_DISPATCHER)
def _packet_in_handler(self, ev):
msg = ev.msg
datapath = msg.datapath
ofproto = datapath.ofproto
parser = datapath.ofproto_parser
in_port = msg.match['in_port']
pkt = packet.Packet(msg.data)
eth = pkt.get_protocols(ethernet.ethernet)[0]
dst = eth.dst
src = eth.src
dpid = datapath.id
self.mac_to_port.setdefault(dpid, {})
self.logger.info("packet in %s %s %s %s", dpid, src, dst, in_port)
# learn a mac address to avoid FLOOD next time.
self.mac_to_port[dpid][src] = in_port
if dst in self.mac_to_port[dpid]:
out_port = self.mac_to_port[dpid][dst]
else:
out_port = ofproto.OFPP_FLOOD
actions = [parser.OFPActionOutput(out_port)]
# install a flow to avoid packet_in next time
if out_port != ofproto.OFPP_FLOOD:
match = parser.OFPMatch(in_port=in_port, eth_dst=dst)
self.add_flow(datapath, 1, match, actions)
data = None
if msg.buffer_id == ofproto.OFP_NO_BUFFER:
data = msg.data
out = parser.OFPPacketOut(datapath=datapath, buffer_id=msg.buffer_id,
in_port=in_port, actions=actions, data=data)
datapath.send_msg(out)
@set_ev_cls(stplib.EventTopologyChange, MAIN_DISPATCHER)
def _topology_change_handler(self, ev):
dp = ev.dp
dpid_str = dpid_lib.dpid_to_str(dp.id)
msg = 'Receive topology change event. Flush MAC table.'
self.logger.debug("[dpid=%s] %s", dpid_str, msg)
if dp.id in self.mac_to_port:
self.delete_flow(dp)
del self.mac_to_port[dp.id]
@set_ev_cls(stplib.EventPortStateChange, MAIN_DISPATCHER)
def _port_state_change_handler(self, ev):
dpid_str = dpid_lib.dpid_to_str(ev.dp.id)
of_state = {stplib.PORT_STATE_DISABLE: 'DISABLE',
stplib.PORT_STATE_BLOCK: 'BLOCK',
stplib.PORT_STATE_LISTEN: 'LISTEN',
stplib.PORT_STATE_LEARN: 'LEARN',
stplib.PORT_STATE_FORWARD: 'FORWARD'}
self.logger.debug("[dpid=%s][port=%d] state=%s",
dpid_str, ev.port_no, of_state[ev.port_state])
使用STP函数库
class SimpleSwitch13(simple_switch_13.SimpleSwitch13):
OFP_VERSIONS = [ofproto_v1_3.OFP_VERSION]
_CONTEXTS = {'stplib': stplib.Stp}
用CONTEXT登录，使用STP函数库
从
config = {dpid_lib.str_to_dpid('0000000000000001'):
{'bridge': {'priority': 0x8000}},
dpid_lib.str_to_dpid('0000000000000002'):
{'bridge': {'priority': 0x9000}},
dpid_lib.str_to_dpid('0000000000000003'):
{'bridge': {'priority': 0xa000}}}
self.stp.set_config(config)
用set_config()方法进行组态设定，用config中的设定时，dpid为0000000000000001的交换机的bridgeID总是最小值，RootBridge也会选择该交换机。
扫一扫
2734
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
