DHCP中继代理配置案例2（eNSP）

本案例利用华为eNSP模拟器，由AC作DHCP服务器，三层交换机做DHCP中继代理，为网络中的AP和无线网络中的STA分配IP地址。

一、拓扑结构

二、网络规划

1、AC1做DHCP服务器，为所有AP和移动终端分配IP

2、AR1做DHCP中继服务器

3、VLAN地址规划

VLAN10地址段：192.168.10.0/24

VLAN20地址段：192.168.20.0/24

VLAN30地址段：192.168.30.0/24

VLAN110地址段：192.168.110.0/30

VLAN120地址段：192.168.120.0/30

4、IP地址规划

AC1 Vlanif30 192.168.30.254/24

AC1 Vlanif110 192.168.110.2/30

AR1 G0/0/0 192.168.110.1/30

AR1 G0/0/1 192.168.120.1/30

LSW1 VLAN10 192.168.10.254/24

LSW1 VLAN20 192.168.20.254/24

LSW1 VLAN120 192.168.120.2/30

三、配置步骤

3.1 配置AC1（DHCP服务器）

1、设备名、VLAN

<AC6605>system-view 
[AC6605]sysname DHCP-Server
[DHCP-Server]vlan batch 30 110

2、端口划分

配置GigabitEthernet 0/0/1

[DHCP-Server]interface GigabitEthernet 0/0/1
[DHCP-Server-GigabitEthernet0/0/1]port link-type access 
[DHCP-Server-GigabitEthernet0/0/1]port default vlan 110
[DHCP-Server-GigabitEthernet0/0/1]quit

配置GigabitEthernet 0/0/2

[DHCP-Server]interface GigabitEthernet 0/0/2
[DHCP-Server-GigabitEthernet0/0/2]port link-type access 
[DHCP-Server-GigabitEthernet0/0/2]port default vlan 30
[DHCP-Server-GigabitEthernet0/0/2]quit

3、配置全局DHCP池

创建vlan10的地址池

[DHCP-Server]dhcp enable 
[DHCP-Server]ip pool vlan10pool 
[DHCP-Server-ip-pool-vlan10pool]network 192.168.10.0 mask 24
[DHCP-Server-ip-pool-vlan10pool]gateway-list 192.168.10.254
[DHCP-Server-ip-pool-vlan10pool]quit

创建vlan20的地址池

[DHCP-Server]ip pool vlan20pool
[DHCP-Server-ip-pool-vlan20pool]network 192.168.20.0 mask 24
[DHCP-Server-ip-pool-vlan20pool]gateway-list 192.168.20.254
[DHCP-Server-ip-pool-vlan20pool]quit

创建vlan30的地址池

[DHCP-Server]ip pool vlan30pool
[DHCP-Server-ip-pool-vlan30pool]network 192.168.30.0 mask 24
[DHCP-Server-ip-pool-vlan30pool]gateway-list 192.168.30.254
[DHCP-Server-ip-pool-vlan30pool]quit

4、G0/0/1和G0/0/2接口上启用全局地址池

[DHCP-Server]interface Vlanif 30
[DHCP-Server-Vlanif30]ip address 192.168.30.254 24
[DHCP-Server-Vlanif30]dhcp select global 
[DHCP-Server-Vlanif30]quit

[DHCP-Server]interface Vlanif 110
[DHCP-Server-Vlanif110]ip address 192.168.110.2 30
[DHCP-Server-Vlanif110]dhcp select global 
[DHCP-Server-Vlanif110]quit

5、配置RIP路由

[DHCP-Server]rip
[DHCP-Server-rip-1]version 2
[DHCP-Server-rip-1]network 192.168.30.0
[DHCP-Server-rip-1]network 192.168.110.0
[DHCP-Server-rip-1]quit
[DHCP-Server]quit
<DHCP-Server>save

3.2 配置路由器AR1

1、设备名、IP地址

<Huawei>system-view 
[Huawei]sysname AR

[AR]interface GigabitEthernet 0/0/0
[AR-GigabitEthernet0/0/0]ip address 192.168.110.1 30
[AR-GigabitEthernet0/0/0]quit

[AR]interface GigabitEthernet 0/0/1
[AR-GigabitEthernet0/0/1]ip address 192.168.120.1 30
[AR-GigabitEthernet0/0/1]quit

2、配置RIP路由

[AR]rip
[AR-rip-1]version 2
[AR-rip-1]network 192.168.110.0
[AR-rip-1]network 192.168.120.0
[AR-rip-1]quit
[AR]quit
<AR>save

3.3 配置LSW1（中继代理）

1、设备名、VLAN

<Huawei>system-view 
[Huawei]sysname DHCP-Relay
[DHCP-Relay]vlan batch 10 20 120

2、端口划分

配置GigabitEthernet 0/0/1

[DHCP-Relay]interface GigabitEthernet 0/0/1
[DHCP-Relay-GigabitEthernet0/0/1]port link-type access 
[DHCP-Relay-GigabitEthernet0/0/1]port default vlan 120
[DHCP-Relay-GigabitEthernet0/0/1]quit

配置GigabitEthernet 0/0/2

[DHCP-Relay]interface GigabitEthernet 0/0/2
[DHCP-Relay-GigabitEthernet0/0/2]port link-type access  
[DHCP-Relay-GigabitEthernet0/0/2]port default vlan 10
[DHCP-Relay-GigabitEthernet0/0/2]quit

配置GigabitEthernet 0/0/3

[DHCP-Relay]interface GigabitEthernet 0/0/3
[DHCP-Relay-GigabitEthernet0/0/3]port link-type access  
[DHCP-Relay-GigabitEthernet0/0/3]port default vlan 20
[DHCP-Relay-GigabitEthernet0/0/3]quit

3、Vlanif10和Vlanif20配置IP、启用DHCP中继代理

在Vlanif10接口启用中继代理

[DHCP-Relay]dhcp enable 
[DHCP-Relay]interface Vlanif 10
[DHCP-Relay-Vlanif10]ip address 192.168.10.254 24
[DHCP-Relay-Vlanif10]dhcp select relay  
[DHCP-Relay-Vlanif10]dhcp relay server-ip 192.168.110.2
[DHCP-Relay-Vlanif10]quit

在Vlanif20接口启用中继代理

[DHCP-Relay]interface Vlanif 20
[DHCP-Relay-Vlanif20]ip address 192.168.20.254 24
[DHCP-Relay-Vlanif20]dhcp select relay 
[DHCP-Relay-Vlanif20]dhcp relay server-ip 192.168.110.2
[DHCP-Relay-Vlanif20]quit

[DHCP-Relay]interface Vlanif 120
[DHCP-Relay-Vlanif120]ip address 192.168.120.2 24
[DHCP-Relay-Vlanif120]quit

4、配置RIP路由

[DHCP-Relay]rip
[DHCP-Relay-rip-1]version 2
[DHCP-Relay-rip-1]network 192.168.10.0
[DHCP-Relay-rip-1]network 192.168.20.0
[DHCP-Relay-rip-1]network 192.168.120.0
[DHCP-Relay-rip-1]quit
[DHCP-Relay]quit
<DHCP-Relay>save

四、测试

1、在AP上使用display ip interface brief查看地址

2、在AC1上使用【display ip pool name 地址池**名 used】查看地址分配情况**