配置策略1

实验拓扑图

配置

R1

acl number 2000  
 rule 5 permit source 2.2.2.2 0 
 rule 10 permit source 24.1.1.0 0.0.0.255 
#
interface GigabitEthernet0/0/0
 ip address 12.1.1.1 255.255.255.0 
#
interface GigabitEthernet0/0/1
 ip address 13.1.1.1 255.255.255.0 
 rip metricin 2000 5
#
interface LoopBack0
 ip address 1.1.1.1 255.255.255.255 
#
rip 1
 version 2
 network 1.0.0.0
 network 12.0.0.0
 network 13.0.0.0

R2

acl number 2000  
 rule 5 permit source 3.3.3.3 0 
#
interface GigabitEthernet0/0/0
 ip address 12.1.1.2 255.255.255.0 
#
interface GigabitEthernet0/0/1
 ip address 24.1.1.1 255.255.255.0 
#
interface LoopBack0
 ip address 2.2.2.2 255.255.255.255 
#
ospf 1 router-id 2.2.2.2 
 import-route rip 1 route-policy 11
 area 0.0.0.0 
  network 2.2.2.2 0.0.0.0 
  network 24.1.1.1 0.0.0.0 
#
rip 1
 version 2
 network 12.0.0.0
 import-route ospf 1 route-policy aa
#
route-policy aa permit node 10 
 if-match ip-prefix xx 
 apply cost 5 
#
route-policy 11 permit node 10 
 if-match acl 2000 
 apply cost 5 
#
route-policy 11 permit node 20 
#
ip ip-prefix xx index 30 permit 34.1.1.0 24

R3

interface GigabitEthernet0/0/0
 ip address 13.1.1.2 255.255.255.0 
#
interface GigabitEthernet0/0/1
 ip address 34.1.1.1 255.255.255.0 
#
interface LoopBack0
 ip address 3.3.3.3 255.255.255.255 
#
ospf 1 router-id 3.3.3.3 
 import-route rip 1 route-policy 22
 area 0.0.0.0 
  network 3.3.3.3 0.0.0.0 
  network 34.1.1.1 0.0.0.0 
#
rip 1
 version 2
 network 13.0.0.0
 import-route ospf 1
#
route-policy 22 permit node 10 
 if-match ip-prefix xx 
 apply cost 5 
#
route-policy 22 permit node 20 
#
ip ip-prefix xx index 10 permit 12.1.1.0 24

R4

interface GigabitEthernet0/0/0
 ip address 34.1.1.2 255.255.255.0 
#
interface GigabitEthernet0/0/1
 ip address 24.1.1.2 255.255.255.0 
#
interface GigabitEthernet0/0/2
#
interface LoopBack0
 ip address 4.4.4.4 255.255.255.255 
#
ospf 1 router-id 4.4.4.4 
 area 0.0.0.0 
  network 0.0.0.0 255.255.255.255 

结果