mt7628 wan插拔IP不更新问题

最新推荐文章于 2024-08-02 22:10:21 发布

weixin_45685021

最新推荐文章于 2024-08-02 22:10:21 发布

阅读量110

点赞数

文章标签： tcp/ip 网络服务器

本文链接：https://blog.csdn.net/weixin_45685021/article/details/131742466

版权

mt7628 wan插拔IP不更新问题

环境：

Kernel 5.4

驱动：esw_rt3050

原因：

以太网驱动监测到网线插拔时，没有成功发送信号到udhcpc进程，以释放ip+得新获取ip

Patch:

Index: linux-5.4.237/drivers/net/ethernet/ralink/esw_rt3050.c
===================================================================
--- linux-5.4.237.orig/drivers/net/ethernet/ralink/esw_rt3050.c
+++ linux-5.4.237/drivers/net/ethernet/ralink/esw_rt3050.c
@@ -458,8 +458,45 @@ static void esw_set_gsc(struct rt305x_es

 static int esw_apply_config(struct switch_dev *dev);

+struct work_struct kill_sig_wq;
+
+void kill_sig_workq(struct work_struct *work)
+{
+       dev_info(NULL, "kill_sig_workq\n");
+       struct file *fp;
+       char pid[8];
+       struct task_struct *p = NULL;
+       //read udhcpc pid from file, and send signal USR2,USR1 to get a new IP
+       fp = filp_open("/var/run/udhcpc-eth0.2.pid", O_RDONLY, 0);
+       if (IS_ERR(fp)){
+                       fp = filp_open("/var/run/udhcpc-eth0.1.pid", O_RDONLY, 0);
+                       if (IS_ERR(fp)){
+                               return;
+               }
+       }
+
+
+ //      if (fp->f_op && fp->f_op->read) {
+             //if (fp->f_op->read(fp, pid, 8, &fp->f_pos) > 0) {
+            //kernel 5.4
+           if(kernel_read(fp, pid, 8, &fp->f_pos)){ 
+                 p = pid_task(find_get_pid(simple_strtoul(pid, NULL, 10)),  PIDTYPE_PID);
+                 if (NULL != p) {
+                    send_sig(SIGUSR2, p, 0);
+                     send_sig(SIGUSR1, p, 0);
+                 }
+             }
+ //      }
+
+       filp_close(fp, NULL);
+
+}
+
+
+
 static void esw_hw_init(struct rt305x_esw *esw)
 {
+       INIT_WORK(&kill_sig_wq, kill_sig_workq);
        int i;
        u8 port_disable = 0;
        u8 port_map = RT305X_ESW_PMAP_LLLLLL;
@@ -755,6 +792,8 @@ int rt3050_esw_has_carrier(struct fe_pri
                        dev_info(esw->dev, "port %d link %s\n", i, link & BIT(i) ? "up" : "down");
                priv->link[i] = link & BIT(i);
        }
+        schedule_work(&kill_sig_wq);
+

        return !!link && cpuport;
 }