vlan实验

pc1，pc2，pc4属于vlan2，pc3，pc5属于vlan3
思路：
1）创建vlan，将接口划入相应的vlan
2）配置trunk干道
3）路由器配置子接口
4）配置dhcp
配置命令：
sw1

sysname 1

vlan batch 2 to 3

interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 2 to 4094

interface GigabitEthernet0/0/2
port link-type access
port default vlan 2

interface GigabitEthernet0/0/3
port link-type access
port default vlan 2

interface GigabitEthernet0/0/4
port link-type access
port default vlan 3

interface GigabitEthernet0/0/5
port link-type trunk
port trunk allow-pass vlan 2 to 4094

sw2

sysname 2

vlan batch 2 to 3

interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 2 to 4094

interface GigabitEthernet0/0/2
port link-type access
port default vlan 2

interface GigabitEthernet0/0/3
port link-type access
port default vlan 3

ar1

dhcp enable

ip pool vid2
gateway-list 192.168.1.254
network 192.168.1.0 mask 255.255.255.0
dns-list 114.114.114.114 8.8.8.8

ip pool vid3
gateway-list 192.168.2.254
network 192.168.2.0 mask 255.255.255.0
dns-list 114.114.114.114 8.8.8.8

interface GigabitEthernet0/0/0.1
dot1q termination vid 2
ip address 192.168.1.254 255.255.255.0
arp broadcast enable
dhcp select global

interface GigabitEthernet0/0/0.2
dot1q termination vid 3
ip address 192.168.2.254 255.255.255.0
arp broadcast enable
dhcp select global