Linux(Centos 7)环境下在线或离线安装wget

一、在线安装wget

使用以下命令查看是否安装过wget,如果什么不显示就说明没有安装过

rpm -qa | grep wget

以下为wget安装命令

sudo yum install -y wget

如果显示以下内容时,说明安装失败,国外镜像源封锁加强,需要更换国内镜像源后才能安装 点击更改镜像源

Loading mirror speeds from cached hostfile
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; 未知的错误"


 One of the configured repositories failed (未知),
 and yum doesn't have enough cached data to continue. At this point the only
 safe thing yum can do is fail. There are a few ways to work "fix" this:

     1. Contact the upstream for the repository and get them to fix the problem.

     2. Reconfigure the baseurl/etc. for the repository, to point to a working
        upstream. This is most often useful if you are using a newer
        distribution release than is supported by the repository (and the
        packages for the previous distribution release still work).

     3. Run the command with the repository temporarily disabled
            yum --disablerepo=<repoid> ...

     4. Disable the repository permanently, so yum won't use it by default. Yum
        will then just ignore the repository until you permanently enable it
        again or use --enablerepo for temporary usage:

            yum-config-manager --disable <repoid>
        or
            subscription-manager repos --disable=<repoid>

     5. Configure the failing repository to be skipped, if it is unavailable.
        Note that yum will try to contact the repo. when it runs most commands,
        so will have to try and fail each time (and thus. yum will be be much
        slower). If it is a very temporary problem though, this is often a nice
        compromise:

            yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true

Cannot find a valid baseurl for repo: base/7/x86_64

二、离线安装wget

1、进入wget[下载地址],下载wget的rpm安装包到本地

在这里插入图片描述

2、将下载好的wget文件用Xftp或其他上传软件将文件上传至 /opt下

在这里插入图片描述

3、运行安装wget包,并查询是否安装成功

rpm -ivh /opt/wget-1.14-10.el7.x86_64.rpm

在这里插入图片描述

在这里插入图片描述

<think>好的,我需要回答用户关于PyCharm中Git设置的功能、作用和使用场景的问题。首先,我需要回忆一下PyCharm中Git相关的功能,并结合提供的引用内容来组织回答。用户提到了三个引用,分别是关于stash、分支管理、reset和回退操作,这些都属于Git设置的一部分。 首先,我应该分点说明功能和作用,比如版本控制、分支管理、代码暂存、撤销与回退、远程仓库交互等。每个部分需要结合具体的设置选项,例如在PyCharm中如何配置Git路径,者如何设置提交前的代码分析。然后,使用场景部分需要对应到用户提到的引用内容,比如开发中中断工作去处理其他请求时使用stash,者需要回退远程分支版本时使用reset。 需要注意的是,用户提供的引用中提到了stash存储未完成的工作、分支操作、reset和回退远程分支,这些都要融入到使用场景中。同时,要确保回答结构清晰,按照功能、作用、使用场景来组织,每个部分下再细分小点。此外,还要生成相关问题,可能涉及其他Git功能具体操作步骤,如冲突解决、与GitHub集成等。 需要检查是否覆盖了用户需求中的所有方面:功能、作用、使用场景,并且引用对应的部分是否自然融入,引用标识是否正确添加。最后,确保使用中文回答,LaTeX格式正确,行内公式用$...$,独立公式用$$...$$,但在这个问题中可能涉及公式较少,主要集中在功能描述上。 现在开始组织内容,确保每个功能点都明确,并引用对应的示例。例如,在代码暂存部分,引用[^1]中的stash场景;在版本回退部分,引用[^3]的回退远程分支。分支管理部分可以引用提到的分支操作。同时,注意语言流畅,避免技术术语过于复杂,保持易于理解。</think>### PyCharm中Git设置的功能与用途详解 #### 一、核心功能与作用 1. **版本控制基础配置** - **功能**:设置Git执行路径、配置用户名/邮箱、定义提交模板。 - **作用**:确保PyCharm正确调用Git工具,规范提交记录信息。例如在`Settings > Version Control > Git`中指定Git安装路径。 2. **分支管理** - **功能**:创建/切换分支、合并分支、对比分支差异。 - **作用**:支持并行开发与功能隔离。如开发新功能时创建独立分支,避免影响主分支稳定性[^1]。 3. **代码暂存(Stash)** - **功能**:临时保存未提交的修改。 - **作用**:处理突发任务时保留当前工作状态。例如紧急修复Bug前执行`Git > Stash Changes`,后续通过`Unstash`恢复。 4. **撤销与历史回退** - **功能**:`Reset HEAD`、`Revert Commit`、`Checkout Revision`。 - **作用**:修复错误提交恢复特定版本。如使用`Reset`回退到历史提交时选择`--soft`保留工作区修改[^2]。 5. **远程仓库交互** - **功能**:Push/Fetch/Pull操作、管理远程地址。 - **作用**:同步团队代码。例如推送前通过`Commit and Push`自动执行代码分析。 #### 二、典型使用场景 1. **多任务切换开发** - **场景**:正在开发功能A时需优先修复生产环境Bug。 - **操作**:通过`Stash`暂存功能A的代码,切换分支修复Bug后恢复进度。 2. **错误提交修复** - **场景**:错误代码已推送到远程仓库。 - **操作**:使用`Reset HEAD~1`撤销本地提交,再强制推送覆盖远程记录(需团队协调)。 3. **代码版本对比** - **场景**:排查新引入的BUG。 - **操作**:在`Log`面板右键选择两个提交版本,执行`Compare Versions`进行差异分析。 4. **分支策略实施** - **场景**:遵循Git Flow工作流。 - **操作**:通过`New Branch`创建`feature/xxx`开发分支,合并到`develop`时使用`Merge``Rebase`。 ```python # PyCharm中Git操作的典型代码提交流程示例 def git_workflow(): checkout_branch("feature/new-module") # 创建并切换分支 commit_changes(include_tests=True) # 提交前自动运行测试 push_to_remote() # 推送到远程仓库 create_merge_request() # 发起代码评审请求 ``` #### 三、高级配置建议 1. **预提交钩子(Pre-commit Hook)** - 在`Settings > Version Control > Commit`中启用`Reformat code`、`Optimize imports`,提升代码规范性。 2. **冲突解决工具** - 配置三方比对工具(如Beyond Compare),通过`Merge Conflicts`对话框可视化解决冲突。 3. **SSH密钥管理** - 在`Settings > SSH Configurations`中添加密钥,实现免密访问私有仓库。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

努力的雅木茶

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值