Arduino DHT11 ESP8266 在OneNet云平台上读取 温湿度

#include "ESP8266.h"
#include "dht11.h"
#include "SoftwareSerial.h"

#define SSID "540ND"    
#define PASSWORD ""
#define HOST_NAME "api.heclouds.com"  
#define DEVICE_ID ""       
#define HOST_PORT (80)                
String APIKey = " "; 

#define INTERVAL_SENSOR 5000 

dht11 DHT11;

#define DHT11PIN 4

SoftwareSerial mySerial(3, 2);
ESP8266 wifi(mySerial);

void setup()
{
  mySerial.begin(115200); 
  Serial.begin(9600);   
  Serial.print("setup begin\r\n");

  Serial.print("FW Version: ");
  Serial.println(wifi.getVersion().c_str());

  if (wifi.setOprToStation()) {
    Serial.print("to station ok\r\n");
  } else {
    Serial.print("to station err\r\n");
  }

  if (wifi.joinAP(SSID, PASSWORD)) {
    Serial.print("Join AP success\r\n");
    Serial.print("IP: ");
    Serial.println(wifi.getLocalIP().c_str());
  } else {
    Serial.print("Join AP failure\r\n");
  }

  Serial.println("");
  Serial.print("DHT11 LIBRARY VERSION: ");
  Serial.println(DHT11LIB_VERSION);

  mySerial.println("AT+UART_CUR=9600,8,1,0,0");
  mySerial.begin(9600);
  Serial.println("setup end\r\n");
}

unsigned long net_time1 = millis(); 
void loop(){

  if (net_time1 > millis())
    net_time1 = millis();

  if (millis() - net_time1 > INTERVAL_SENSOR) 
  {

    int chk = DHT11.read(DHT11PIN);

    Serial.print("Read sensor: ");
    switch (chk) {
      case DHTLIB_OK:
        Serial.println("OK");
        break;
      case DHTLIB_ERROR_CHECKSUM:
        Serial.println("Checksum error");
        break;
      case DHTLIB_ERROR_TIMEOUT:
        Serial.println("Time out error");
        break;
      default:
        Serial.println("Unknown error");
        break;
    }

    float sensor_hum = (float)DHT11.humidity;
    float sensor_tem = (float)DHT11.temperature;
    Serial.print("Humidity (%): ");
    Serial.println(sensor_hum, 2);

    Serial.print("Temperature (oC): ");
    Serial.println(sensor_tem, 2);
    Serial.println("");

    if (wifi.createTCP(HOST_NAME, HOST_PORT)) { 
      Serial.print("create tcp ok\r\n");
      char buf[10];

      String jsonToSend = "{\"Temperature\":";
      dtostrf(sensor_tem, 1, 2, buf);
      jsonToSend += "\"" + String(buf) + "\"";
      jsonToSend += ",\"Humidity\":";
      dtostrf(sensor_hum, 1, 2, buf);
      jsonToSend += "\"" + String(buf) + "\"";
      jsonToSend += "}";


      String postString = "POST /devices/";
      postString += DEVICE_ID;
      postString += "/datapoints?type=3 HTTP/1.1";
      postString += "\r\n";
      postString += "api-key:";
      postString += APIKey;
      postString += "\r\n";
      postString += "Host:api.heclouds.com\r\n";
      postString += "Connection:close\r\n";
      postString += "Content-Length:";
      postString += jsonToSend.length();
      postString += "\r\n";
      postString += "\r\n";
      postString += jsonToSend;
      postString += "\r\n";
      postString += "\r\n";
      postString += "\r\n";

      const char *postArray = postString.c_str(); 

      Serial.println(postArray);
      wifi.send((const uint8_t *)postArray, strlen(postArray)); 
      Serial.println("send success");
      if (wifi.releaseTCP()) { 
        Serial.print("release tcp ok\r\n");
      } else {
        Serial.print("release tcp err\r\n");
      }
      postArray = NULL; 
    } else {
      Serial.print("create tcp err\r\n");
    }

    Serial.println("");

    net_time1 = millis();
  }
}

需要的dht11.h 库文件：
https://pan.baidu.com/s/1ntv9QA1#list/path=%2F