IP课：RIP实验

一、分配IP地址
R2~R7: 172.16.0.0/16
172.16.0.0/19
R2-R3 172.16.0.0/20
R2环回172.16.16.0/20
172.16.32.0/19
R3-R4: 172.16.32.0/20
R3环回：172.16.48.0/20
172.16.64.0/19
R4-R7: 172.16.64.0/20
R4环回：172.16.80.0/20
172.16.96.0/19
R3-R5: 172.16.96.0/20
R5环回：172.16.112.0/20
172.16.128.0/19
R6-R5: 172.16.128.0/20
R6环回：172.16.144.0/20
172.16.160.0/19
R7-R6: 172.16.160.0/20
R7环回：172.16.176.0/20
R6-R8：68.0.0.0/24
R1-R2: 12.0.0.0/24
二、接口配ip
R1:
[r1]int g0/0/01
[r1-GigabitEthernet0/0/1]ip add 12.1.1.1 24

R2:
[r2]int g0/0/2
[r2-GigabitEthernet0/0/2]ip add 12.1.1.2 24
[r2]int g0/0/1
[r2-GigabitEthernet0/0/1]ip add 172.16.0.1 20
[r2]int LoopBack 0
[r2-LoopBack1]ip add 172.16.16.1 20

R3:
[r3]int g0/0/2
[r3-GigabitEthernet0/0/2]ip add 172.16.0.2 20
[r3]int g0/0/1
[r3-GigabitEthernet0/0/1]ip add 172.16.32.1 20
[r3]int g0/0/0
[r3-GigabitEthernet0/0/2]ip add 172.16.96.1 20
[r3]int LoopBack 0
[r3-LoopBack1]ip add 172.16.48.1 20

R4:
[r4]int g0/0/02
[r4-GigabitEthernet0/0/2]ip add 172.16.32.2 20
[r4]int g0/0/1
[r4-GigabitEthernet0/0/1]ip add 172.16.64.1 20
[r4]int LoopBack 0
[r4-LoopBack0]ip add 172.16.80.1 20

R5:
[r5]int g0/0/1
[r5-GigabitEthernet0/0/1]ip add 172.16.144.1 20
[r5]int g0/0/2
[r5-GigabitEthernet0/0/2]ip add 172.16.112.2 20
[r5]int LoopBack 0
[r5-LoopBack1]ip add 172.16.96.1 20

R6:
[r6]int g0/0/2
[r6-GigabitEthernet0/0/2]ip add 172.16.160.1 20
[r6]int g0/0/1
[r6-GigabitEthernet0/0/1]ip add 172.16.128.2 20
[r6]int g0/0/0
[r6-GigabitEthernet0/0/0]ip add 68.1.1.1 24
[r6]int loopback 0
[r6-LoopBack0]ip add 172.16.144.1 20

R7:
[r7]int g0/0/2
[r7-GigabitEthernet0/0/2]ip add 172.16.64.2 20
[r7]int g0/0/1
[r7-GigabitEthernet0/0/1]ip add 172.16.160.2 20
[r7]int LoopBack 0
[r7-LoopBack0]ip add 172.16.176.1 20

R8:
[r8]int g0/0/0
[r8-GigabitEthernet0/0/0]ip add 68.1.1.2 24
[r8]int g0/0/1
[r8-GigabitEthernet0/0/1]ip add 78.1.1.1 24
[r8]int LoopBack 0
[r8-LoopBack0]ip add 192.168.1.1 24

R9:
[r9]int g0/0/02
[r9-GigabitEthernet0/0/2]ip add 78.1.1.2 24
[r9]int LoopBack 0
[r9-LoopBack0]ip add 192.168.2.1 24

三、配置RIP
RIPV2
R2:
[r2]rip 1
[r2-rip-1]version 2
[r2-rip-1]undo summary
[r2-rip-1]network 172.16.0.0
R3:
[r3]rip 1
[r3-rip-1]version 2
[r3-rip-1]undo summary
[r3-rip-1]network 172.16.0.0
R4:
[r4]rip 1
[r4-rip-1]version 2
[r4-rip-1]undo summary
[r4-rip-1]network 172.16.0.0
R5:
[r5]rip 1
[r5-rip-1]version 2
[r5-rip-1]undo summary
[r5-rip-1]network 172.16.0.0
R6:
[r6]rip 1
[r6-rip-1]version 2
[r6-rip-1]undo summary
[r6-rip-1]network 172.16.0.0
[r6-rip-1]network 68.0.0.0
R7:
[r7] rip 1
[r7-rip-1]version 2
[r7-rip-1]undo summary
[r7-rip-1]network 172.16.0.0

RIPV1
R8:
[r8]rip 1
[r8-rip-1]version 1
[r8-rip-1]network 192.168.0.0
[r8-rip-1]network 78.0.0.0
[r8-rip-1]network 68.0.0.0

R9:
[r9]rip 1
[r9-rip-1]version 1
[r9-rip-1]network 192.168.0.0
[r9-rip-1]network 78.0.0.0

四、RIPv1和 v2互通
R6:
[r6]int g0/0/0
[r6-GigabitEthernet0/0/0]rip version 1

五、通ISP
[r2]ip route-static 0.0.0.0 0 12.1.1.1
[r2]rip 1
[r2-rip-1]default-route originate
[r2]acl 2000
[r2-acl-basic-2000]rule permit source any
[r2]int g0/0/2
[r2-GigabitEthernet0/0/2]nat outbound 2000

六、控制选路
[r4]acl 2000
[r4-acl-basic-2000]rule permit source 172.16.172.0 0.0.15.255
[r4]int g0/0/1
[r4-GigabitEthernet0/0/1]rip metricin 2000 4

七、r1远程登录r2实际登录r7
1、R7上配置telnet
[r7]user-interface vty 0 4
[r7-ui-vty0-4]aut
[r7-ui-vty0-4]authentication-mode password
Please configure the login password (maximum length 16):123

2、R2上配置端口映射
[r2]int g0/0/2
[r2-GigabitEthernet0/0/2]nat server protocol tcp global 12.1.1.3 23 inside 172.1
6.176.1 23

3、ISPtelnet登陆验证