Verilog刷题HDLBits——Rule110

题目描述

Rule 110 is a one-dimensional cellular automaton with interesting properties (such as being Turing-complete).

There is a one-dimensional array of cells (on or off). At each time step, the state of each cell changes. In Rule 110, the next state of each cell depends only on itself and its two neighbours, according to the following table:

(The name “Rule 110” comes from reading the “next state” column: 01101110 is decimal 110.)

In this circuit, create a 512-cell system (q[511:0]), and advance by one time step each clock cycle. The load input indicates the state of the system should be loaded with data[511:0]. Assume the boundaries (q[-1] and q[512]) are both zero (off).

化简

通过卡诺图化简可得
C_next=C⊕R+L’R

代码

module top_module(
    input clk,
    input load,
    input [511:0] data,
    output [511:0] q
); 
    always@(posedge clk)
        begin
            if(load)
                q<=data;
            else
                q<=(q^{q[510:0],1'b0})|(~{1'b0,q[511:1]}&{q[510:0],1'b0});
        end

endmodule

结果